PCE MX Online 6KVA 5400W Internal Batteries Double Conversion Online- Pure Sine Wave
General Topology Online double conversion Configuration Tower Part Number 9E3000I Rating (VA/Watts) 3000/2400 Dimensions (H x W x D, mm) 399 x 330 x 190 Weight (kg) 24.2 Warranty 2 years Electrical Input Connection (1) IEC-320-C20 Input Voltage Range 176-300V without derating (up to 100-300V with derating) Nominal Voltage 208/220/230/240V Frequency 50/60 Hz autoselection Frequency Range 40-70 Hz Electrical Output Voltages 208V*/220V/230V/240V ±1% Voltage THD <2% for 100% linear load Outlets (6) IEC-320-C13 (1) IEC-320-C19 Overload Capacity 105%-130% : 60s, 130%-150% : 10s,>150% : ≥ 300ms Efficiency (Normal Mode) Up to 91% in Online mode Output Frequency 50/60 Hz autoselect Communications Communication Ports 1 USB port + 1 RS232 serial port (USB and RS232 ports cannot be used simultaneously) Communication Slot 1 slot for Network-M2, ModBus-MS or Relay-MS cards Power Management Software Intelligent Power Editions Environmental & Standards Audible Noise <37 dB @ typical load Operating Temperature 0 to 40°C Safety markings IEC/EN 62040-1 EMC Markings IEC/EN 62040 -2 Approvals CE, CB report (TUV)
The PROLINK PRO700 Line Interactive UPS is designed to provide reliable backup power and protection for computers, networking devices, and other electronic equipment. It helps maintain stable operation during power interruptions and voltage fluctuations. With a 650VA capacity and 360W output power, this UPS provides practical power support for home and office environments. Additionally, its line-interactive design with AVR technology helps regulate voltage and improve power stability. The PRO700 supports a wide input voltage range from 140V to 300V AC. Moreover, it automatically senses 50Hz or 60Hz input frequency, allowing compatibility with different power environments. The UPS provides simulated sine wave output during battery mode and sine wave output during AC mode. Furthermore, the fast transfer time helps reduce interruptions when switching to battery operation. The built-in 12V 8.2Ah battery provides backup power for connected devices during outages. Therefore, users can safely save work and shut down equipment during unexpected power failures. The PROLINK PRO700 includes protection features against short circuits, overloads, discharge, and overcharge conditions. In addition, its intelligent battery management helps improve battery protection and lifespan. The compact design makes the UPS suitable for desktops, network equipment, and small office setups. Also, its low noise operation allows comfortable use in different working environments. The PROLINK PRO700 Line Interactive UPS combines voltage regulation, backup power, and essential protection features in a compact solution. As a result, it provides dependable power support for everyday electronic devices. Specifications: Capacity: 650VA / 360W Input Voltage Range: 140V–300V AC ±5% Battery: 12V / 8.2Ah sealed lead-acid battery Output Waveform: Simulated sine wave (Battery Mode) Protection: Short circuit, overload, discharge, and overcharge protection
UPS HAWK 2000VA 2kva 1 year warranty
PCE MX Online 3KVA 2700W is a high-performance online double-conversion UPS designed for critical power protection. It provides continuous, clean, and stable electricity for servers, network systems, and sensitive electronic equipment. In addition, PCE MX Online 3KVA 2700W uses true online double-conversion technology. Therefore, it delivers zero transfer time between mains and battery mode. Moreover, it provides pure sine wave output to ensure safe operation of connected devices. Furthermore, PCE MX Online 3KVA 2700W supports a 3000VA / 2700W load capacity. As a result, it can handle demanding setups such as multiple PCs and networking equipment. It also maintains stable voltage regulation under fluctuating input conditions. In addition, PCE MX Online 3KVA 2700W includes advanced protection features. Therefore, it guards against overload, short circuits, and power instability. Moreover, it is designed for professional environments that require uninterrupted power availability. Overall, PCE MX Online 3KVA 2700W delivers strong backup performance, zero-interruption switching, and reliable protection for critical systems. Specifications: 3000VA / 2700W high-capacity output Online double-conversion UPS technology Zero transfer time for uninterrupted power Pure sine wave output for sensitive equipment Overload and short-circuit protection system
The Prolink Online UPS 10KVA with LCD and Internal Battery is designed to provide stable power protection for servers, networking equipment, and critical electronic systems. It helps maintain continuous operation during power failures and protects devices from unstable power conditions. The UPS provides a 10KVA capacity and uses online double conversion technology. Additionally, it delivers clean and stable power output to support sensitive equipment that requires reliable energy performance. The Prolink Online UPS features an LCD display that allows users to monitor important system information. Moreover, the screen shows details such as input voltage, output voltage, battery status, load level, and operating conditions for easier management. The UPS includes an internal battery system that provides backup power during outages. Furthermore, it supports protection features against overload, short circuit, over-temperature, and battery problems to help protect connected devices. The Prolink Online UPS is suitable for offices, data centers, and professional environments that need continuous power support. Therefore, it provides a practical backup solution for important equipment that requires stable electricity. The UPS combines high capacity, online power protection, battery backup, and monitoring features in one system. As a result, it helps users maintain reliable power performance during unexpected interruptions. Specifications: Capacity: 10KVA UPS Type: Online Double Conversion Display: LCD Display Battery: Internal Battery System Protection: Overload, Short Circuit, Over Temperature Protection
Specifications : Brand HAWK Package Dimensions 59.2 x 54.5 x 19.8 cm; 9 Kilograms Item model number HAWK202011 Manufacturer HAWK Wattage 720 watts Are Batteries Included Yes Item Weight 9 kg
Features • Advanced DSP and 3-level technology • Output power factor 1.0 • Active power factor correction (APFC), input power factor up to 0.99 • High efficiency 95% (up to 98% in ECO mode) • Advanced digital parallel technology • Wide input voltage range (11 0 – 288 Vac) and frequency range (40 -70Hz) • 50 I 60 Hz frequency auto sensing • Two modes of frequency conversion: 50 Hz input I 60 Hz output or 60 Hz input I 50 Hz output • Dual-input design, supporting independent bypass • Flexible battery configuration (settable 16-20 pes batteries) • Digitally controlled charger • High charging current available (Max. 12 A) • Charging voltage and current configured by demands • Linear derating in low voltage input reducing battery discharging times, extending the service life of battery • Intelligent battery management, automatic floating I equalizing charge control, charger dormancy control, increasing battery life by 50% • Ability to switch on the UPS with batteries • Settable delayed start time when mains power is restored, reducing the impact on power grid or generator • Fan speed varies intelligently with temperature, reducing noise and extending its service life • Equipped with self-aging function • Compact internal layout, miniaturized the complete unit for small footprint • LCD+LED display, multi-functional keys operation, friendly human-machine interface • Powerful background software for parameters configuration • Advanced multi-platform communications: RS232, USB, RS485, SNMP and dry contacts communication interfaces • Effective software and hardware protection function, robust self-diagnostic function, and abundant event log for check Available Options • RS232 and smart card slot included • Optional parallel function, battery temperature compensation, SNMP card, USB, RS485 card, dry contacts, EMD, and SMS alarms Specifications Voltage range OUTPUT Output wiring Rated voltage Voltage regulation Frequency Waveform Power factor Total harmonic distortion (THDv) Crest factor Overload BATTERIES DC voltage Number of battery lnbuilt battery (standard model) Charging current Recharge time EM Efficiency Transfer time Protections Max. number of parallel connections Communications Display OTHERS Operating temperature Storage temperature Relative humidity Altitude !Prating Noise level at 1 m Dimensions (W x D x H) (mm) Packaged dimensions (W x D x H) (mm) Net weight (kg) Gross weight (kg) 110- 176 Vac (linear derating between 50% and 100% load); 176- 288 Vac (no derating) Single-phase three-wire (1 Cll + N + PE) 208 (PF=0.9) 1220 1230 1240 Vac ± 1% Synchronized to bypass in mains mode; 50 160 Hz±0.1% Hz in battery mode Sinusoidal 1 s 1% (linear load); s 4% (non-linear load) 3:1 105%- 110% for 10 min, 110%- 125% for 1 min, 126%- 150% for 30 s 192 Vdc (192- 240 Vdc settable) 16 pes (16- 20 settable) 12VI7Ahx16 I 12VI9Ahx16 Standard model: 1 A; Long time model: 5A(default), 1 – 5Asettable, 12A (optional) Standard model: 90% capacity restored in 8 hours; Long time model: depend on the capacity of battery ~ 94% at 100% load, max. 95% at 60% load,~ 98% in ECO mode Oms Short-circuit, overload, overtemperature, battery low voltage, overvoltage, undervoltage and fan failure 4 RS232 (standard), USB I RS4851 dry contacts I SNMP I baltery temperature compensation (optional) LCD+ LED O”C – 40″C -25″C – 55″C (without battery) 0 – 95% (non-condensing) s 1 000 m, derating 1% for each additional 1 00 m IP20 S55dB S58dB 191 X 465 X 711 (S), 191 X 465 X 350 (H) 191 X 495 X 711 (S), 191 X 495 X 350 (H) 310 X 654 X 941 (S), 318 X 595 X 475 (H) 310 X 685 X 941 (S), 318 X 617 X 475 (H) 53 (S), 14.5 (H) 62 (S), 16.5 (H) 61 (S), 16 (H) 70 (S), 18 (H)
The Beco Mini DC UPS 8800mAh delivers compact and reliable power backup for small DC devices. It offers emergency power without bulky hardware. This helps protect devices during brief outages or unstable power. Users enjoy continuous operation with confidence. Moreover, the Beco Mini DC UPS features an 8800mAh battery for extended backup time. It supports devices like routers, cameras, and small electronics. This ensures continuous functionality when mains power fails. Backup power stays dependable. In addition, the DC UPS supports automatic switching when power cuts occur. It detects outages instantly and activates backup power without delay. This keeps your devices running smoothly. Protection remains seamless and reliable. Furthermore, the Beco Mini DC UPS includes stable DC output for sensitive electronics. Power delivery stays steady even under load. This helps reduce risk of damage. Devices operate without sudden stops. Also, the UPS delivers a compact and portable design for easy placement anywhere. You can install it near devices without taking much space. This adds convenience for small homes and offices. In addition, the Beco Mini DC UPS 8800mAh supports multiple connection options for flexible use. It works with DC devices requiring uninterrupted power. Also, the compact and sturdy casing improves durability for daily use. The build feels reliable and long‑lasting. Users can trust the UPS for regular backup needs. Overall, the Beco Mini DC UPS 8800mAh delivers dependable backup power, seamless switching, and flexible use in a compact form. It is ideal for small DC devices needing continuous power and stable operation. Specifications: MINI DC UPS POE 8800mah, 17W Built-in Lithium Battery 2200mAh*4 5VDC USB output, 3*Sockets DC output Interface 5V/9V/12V Over charge, Over discharge, Overload, & Short circuit protection Microprocessor controller guaranties high reliability Multi-LED Status Indicator For: Routers, CCTVs, Modem, Wireless Phones, Monitors, PSP, and others
Specifications : Professional II Series (1P/1P) Tower is specifically designed for operation in poor power areas. They provides high power density with long backup time in compact size. It’s ideal for ATMs, banking and other business critical applications. – True double-conversion – Microprocessor control optimizes reliability – Output power factor 0.8 – Wide input voltage (110 V – 300 V) – Converter mode available – ECO mode for energy saving – Generator compatible – Smart SNMP works well with either USB or RS-232 together – Comprehensive display allows easy monitoring and access of UPS status – Input power factor correction manufacturer link
The Beco GS3000 3000VA 1800W UPS delivers powerful backup power for demanding home, office, and business setups. It supports high-performance desktops, servers, and networking systems. This UPS helps prevent data loss and sudden shutdowns during power outages. Users enjoy dependable protection while working and gaming. Moreover, the Beco GS3000 3000VA 1800W UPS offers a strong 3000 VA capacity with 1800 W output power for heavy electrical loads. It keeps multiple devices powered longer during interruptions. This improves system stability and uptime. Reliability stays consistent under heavy use. In addition, the UPS features built-in surge protection for shielding electronics against voltage spikes. It guards your devices from electrical damage. This adds extra peace of mind during storms and unstable power. Protection remains strong and consistent. Furthermore, the Beco GS3000 3000VA 1800W UPS includes automatic voltage regulation to correct lows and highs. It balances voltage without manual input. As a result, connected systems receive steady power. This helps prolong device lifespan. Also, the UPS delivers reliable battery backup when electricity fails. You can save work and safely shut down devices before the battery runs out. This prevents data corruption and interruptions. Backup support feels dependable. In addition, the Beco GS3000 3000VA 1800W UPS includes clear LED indicators for easy status checks. You can monitor power and battery conditions at a glance. Monitoring becomes simple and intuitive. Users stay informed. Moreover, the UPS supports multiple output sockets for connecting many devices. This increases flexibility for busy workstations, servers, and media setups. You can protect key electronics with one unit. Furthermore, the Beco GS3000 3000VA 1800W UPS supports plug-and-play installation without complex steps. Setup is fast and stress-free for all users. Connections remain secure and organized. Also, the sturdy and compact design fits desks, shelves, and racks without taking much space. It blends well into office and home environments. Overall, the Beco GS3000 3000VA 1800W UPS delivers strong battery backup, surge protection, and steady voltage regulation. This UPS is ideal for users who need powerful and dependable power protection daily. Specifications: 3000VA, 1800W, LCD, Metal Case Input: 145-290 VAC Output: 230VAC 50/60HZ 12V 9AH *4pcs, Universal Socket *4 + EU Plug With AVR, Bypass output Overload and short circuit protection
The INVO INSR Stabilizer offers automatic voltage regulation for homes and offices. It supports single-phase input from 1000 VA to 5000 VA, covering multiple needs . Moreover, it features a clear LCD that shows input and output voltages. This stabilizer uses a sturdy metal cabinet to protect internal parts. Also, it adds a three-second power delay to protect connected devices . Therefore, your appliances start safely after power returns. It comes in models such as INSR1000, 1500, 2000, 3000, and 5000 VA. This range suits small PCs to mid-sized equipment and appliances . Additionally, installation is easy via wall mount or tabletop placement. Built-in protections include overvoltage, undervoltage, and overload safety. This helps prevent damage during electrical fluctuations. It also resists heat and short circuit events. Thus, it keeps both electronics and home safe. Thanks to its servo-controlled design, it delivers steady output within ±3%. Hence, your sensitive devices run smoothly and securely. It also operates quietly, ideal for offices and study rooms. Plus, it’s energy efficient and requires minimal maintenance. Furthermore, its LCD display and simple controls make setup fast. The stabilizer supports various uses like PCs, printers, routers, TVs, and appliances. In short, the INVO INSR Stabilizer combines solid performance, safety, and ease. Choose this device when you need dependable voltage control at home or office. Specifications: INSR300 INVO Automatic Voltage Regulator 3000VA, LCD Display ,Single Phase, Metal Cabinet, Delay 3 secs INSR200 INVO Automatic Voltage Regulator 2000VA, LCD Display ,Single Phase, Metal Cabinet, Delay 3 secs INSR150 INVO Automatic Voltage Regulator 1500VA, LCD Display ,Single Phase, Metal Cabinet, Delay 3 secs INSR100 INVO Automatic Voltage Regulator 1000VA, LCD Display ,Single Phase, Metal Cabinet, Delay 3 secs INSR50 INVO Automatic Voltage Regulator 1000VA, LCD Display ,Single Phase, Metal Cabinet, Delay 3 secs
Eaton 5S UPS, 1500 VA, 900 W, Input: C14, Outputs: (4) C13, (4) C13 surge only, Tower General Topology Line-Interactive (AVR with Booster + Fader) Configuration Tower or under monitor Part Number 5S1500i Color Black Rating (VA/Watts) 1500/900 Dimensions (H x W x D, mm) 250 x 87 x 382 Weight (kg) 11.08 Electrical Input Connection (1) IEC-320-C14 Input Voltage Range 175V-275 V Nominal Voltage 230 V Operating Frequency 50-60 Hz autoselect Electrical Output Nominal Voltage 230 VAC Output voltage regulation 230 V +/- 10% Outlets (4) IEC-320-C13 (4) IEC-320-C13 surge only Communications Communication Ports HID-compliant USB port for automatic integration with most common operating systems (Windows Vista, 7 & 8, Linux, Mac OS X), cable supplied Environmental & Standards Audible Noise < 40 dB at 1 Meter Operating Temperature 0 to 40°C Safety markings IEC/EN 62040-1, IEC/EN 62040 -5 Markings CB Report, CE mark Data Line Protection Tel/Fax/Modem/Internet and Ethernet 2 Years Warranty manufacturer link
Max Configurable Power (Watts) 6.0kWatts / 6.0kVA Efficiency at Full Load 94.0 % Output Frequency (sync to mains) 50/60 Hz +/- 3 Hz Sync to mains Other Output Voltages 220 V, 240 V Load Crest Factor 3 : 1 Topology Double conversion online Waveform type Sine wave Bypass Internal bypass (automatic and manual) Input Input frequency 40 – 70 Hz Input voltage range for main operations 110 – 300 Adjustable (half load), 176 – 300V Efficiency at Full Load 94.0 % Other Input Voltages 220 V, 240 V Batteries & Runtime Battery type Lead-acid battery Typical recharge time 3hour(s) Battery Charge Power (Watts) 373 Watts Runtime View Runtime Graph View Runtime Chart Communications & Management Interface Port(s) DB-9 RS-232, Intelligent Smart Slot, USB Control panel Multifunction LCD status and control console Audible Alarm Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm Emergency Power Off (EPO) Yes Available SmartSlot™ Interface Quantity 1 Surge Protection and Filtering Surge energy rating 600Joules Physical Maximum Height 685MM, 68.5CM Maximum Width 190MM, 19.0CM Maximum Depth 374MM, 37.4CM Net Weight 54.0KG Shipping weight 66.0KG Shipping Height 910MM, 91.0CM Shipping Width 290MM, 29.0CM Shipping Depth 495MM, 49.5CM Color Black Environmental Operating Temperature 0 – 40 °C Operating Relative Humidity 0 – 95 (Non-condensing) % Operating Elevation 0 – 3000meters Storage Temperature -15 – 60 °C Storage Relative Humidity 0 – 95 (Non-condensing) % Storage Elevation 0 – 15000meters Audible noise at 1 meter from surface of unit 55.0dBA Protection Class IP20 1 YEAR WARRANTY
Specifications : Output Max Configurable Power (Watts) 6.0kWatts / 6.0kVA Output Voltage Note Configurable for 220 : 230 or 240 nominal output voltage Efficiency at Full Load 94.0 % Output Voltage Distortion 1 % Output Frequency (sync to mains) 50/60 Hz +/- 3 Hz Sync to mains Other Output Voltages 220 V, 240 V Load Crest Factor 3 : 1 Topology Double conversion online Waveform type Sine wave Bypass Internal bypass (automatic and manual) Input Input frequency 40 – 70 Hz Auto sensing Input voltage range for main operations 110 – 300 Half load, 176 – 300 Full loadV Efficiency at Full Load 94.0 % Other Input Voltages 220 V, 240 V Batteries & Runtime Battery type Lead-acid battery Typical recharge time 7hour(s) Nominal Battery Voltage 192 V Expected Battery Life (years) 3 – 5 Battery Charge Power (Watts) 235 Watts Runtime View Runtime Graph Communications & Management Interface Port(s) DB-9 RS-232, USB Control panel Multifunction LCD status and control console Audible Alarm Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm Emergency Power Off (EPO) Yes Available SmartSlot™ Interface Quantity 1 Surge Protection and Filtering Surge energy rating 600Joules Physical Maximum Height 173MM, 17.3CM Maximum Width 438MM, 43.8CM Maximum Depth 710MM, 71.0CM Net Weight 61.0KG Shipping weight 71.0KG Shipping Height 1232MM, 123.19CM Shipping Width 600MM, 60.0CM Shipping Depth 836MM, 83.6CM Color Black Environmental Operating Temperature 0 – 40 °C Operating Relative Humidity 0 – 95 % Operating Elevation 0 – 3000meters Storage Temperature -15 – 60 °C Storage Relative Humidity 0 – 95 (Non-condensing) % Storage Elevation 0 – 15000meters Audible noise at 1 meter from surface of unit 55.0dBA Online thermal dissipation 1172.0BTU/hr Protection Class IP20 Conformance Approvals CE, EAC, EN/IEC 62040-1, EN/IEC 62040-2, TISI Standard warranty 2 years repair or replace Sustainable Offer Status RoHS Compliant Warranty : 1 year https://www.apc.com/shop/dk/en/products/APC-Easy-UPS-On-Line-SRV-6000VA-RM-230V-with-Rail-Kit/P-SRV6KRIRK
INVO Online INH100 INVO Online INH100 Centralized server center, mainframe, network control center, computing center max efficiency UPS System . AC Input Bypass AC Output . Battery Fault Screen OFF ON LCD AC Input Bypass AC Output Battery Fault Screen OFF ON LCD INVO Online INH100 Full Specifications : INVO Online INH100 Centralized server center, mainframe, network control center, computing center INVO Online INH100 UPS High Frequency 1000 VA, LCD Display Inbuilt Battery 2 x 12V/9AH Specifications: Specifications : Centralized server center, mainframe, network control center, computing center INVO Online UPS High Frequency 1000 VA, LCD Display Inbuilt Battery 2 x 12V/9AH 1 year warranty Manufacturer Link
APC Easy UPS SRV, 1600 Watts / 2 KVA, Online double conversion, Sine wave, 230V, Multi-function LCD status and control console, Surge Protection and Filtering, Generator compatible, Management Software, USB, 2 years warranty Electronics and Battery
The Invo Line Interactive UPS INLI Series is a power protection solution designed to provide backup power and voltage regulation for computers, networking equipment, and other electronic devices. It helps protect connected equipment from power interruptions, voltage fluctuations, and electrical disturbances. Therefore, it is suitable for home, office, and professional environments. The line interactive technology provides automatic voltage regulation to maintain stable power output while reducing the impact of unstable electricity. In addition, the series includes multiple capacity options from 750VA to 3000VA, allowing users to select a suitable model for their power requirements. As a result, it supports different setups ranging from personal computers to larger equipment. The system includes models with LED or LCD displays, built-in batteries, and external battery support depending on the selected capacity. Moreover, higher-capacity models provide extended backup options with additional battery configurations. Therefore, the INLI Series offers flexible solutions for different power backup needs. The workflow compatibility makes this UPS series suitable for protecting PCs, workstations, networking devices, and other sensitive electronics. In addition, the compact tower design and protection features help provide reliable operation during power events. Specifications: Capacity options: 750VA to 3000VA Technology: Line Interactive UPS with AVR Display options: LED or LCD depending on model Battery options: Built-in or external batteries Models available: INLI85, INLI100, INLI150, INLI200, INLI300 and more
The PCE EX Online 6 KVA 5400W is a high-capacity online UPS built for strong power protection in offices and business environments. This UPS delivers clean and stable electricity even during severe power issues. Moreover, its true double-conversion design removes surges, sags, and spikes for safe device operation. Therefore, it fits companies and users who need dependable backup without interruption. First, the PCE EX Online 6 KVA 5400W supplies pure sine wave output for sensitive electronics like servers, workstations, and networking gear. This helps protect your devices from damage and performance drops. In addition, the online design ensures seamless switching between mains and battery power. As a result, connected equipment stays powered without sudden shutdowns during outages. Next, this UPS supports a high load capacity for multiple systems at once. You can run large setups including computers, storage units, and critical machinery. Furthermore, advanced battery management maximizes runtime and extends battery health. This means longer backup support when power cuts last. Meanwhile, the LCD display shows real-time status, load, and battery info for easy monitoring. The durable build quality makes the unit reliable for daily heavy use and long operational hours. Additionally, installation and setup are quick, with minimal steps required. Consequently, you save time and avoid complex configurations. Also, the UPS includes advanced safety features to prevent overloads and short circuits for extra peace of mind. Smart communication options integrate with software for automatic shutdown and alert notifications. This keeps systems protected even when you are away. Moreover, the UPS runs quietly and remains cool under full load without noise disruption. Therefore, it fits well in busy workspaces without distraction. Overall, the PCE EX Online 6 KVA 5400W delivers seamless power backup, strong protection, and stable performance. It provides great value for users who need reliable power security for critical systems. Specifications: Voltage : 220V, 230V, or 240V Capacity :12v/7Ah Frequency:50/60 Hz
The PROLINK PRO1501SFCU Super Fast Charging UPS is designed to provide reliable backup power and voltage protection for computers, networking equipment, gaming systems, and office electronics. It helps keep essential devices operating during power interruptions and unstable electrical conditions. The UPS provides a 1500VA capacity and uses line interactive technology with Automatic Voltage Regulation (AVR). Additionally, AVR helps stabilize input voltage fluctuations and delivers safer power to connected devices. The PROLINK PRO1501SFCU features super-fast charging technology that significantly reduces battery recharge time after a power outage. Moreover, this feature ensures the UPS becomes ready for the next interruption more quickly. The UPS includes multiple protection functions against overload, short circuit, surge, and battery discharge conditions. Furthermore, these protection features help improve the safety and reliability of connected equipment. The PROLINK PRO1501SFCU includes LED status indicators and audible alarms for easier system monitoring. Therefore, users can quickly check operating conditions and power status during daily use. The compact design makes the UPS suitable for homes, offices, and small business environments. In addition, it provides dependable backup support for desktop PCs, routers, NAS devices, and CCTV systems. The PROLINK PRO1501SFCU Super Fast Charging UPS combines backup power, rapid battery charging, AVR technology, and advanced protection features. As a result, it provides a practical and reliable power protection solution for everyday applications. Specifications: Capacity : 1500VA Input : 140-230VAC Output : 230VAC Transfer Time : 2ms Battery Type : 12V Backup Time : 40 Min (Depending on the load) Part Number : PRO1501SFCU
Specifications : GENERAL UPS Type : Tower Phase : Single phase with ground Rating (VA) : 2000 Nominal Power (W) : 1600 Standard Model Dimension (mm) : 397x 145 x 220 (D x W x H) Weight (kg) : 17 Long-run Model Dimension (mm) : 397 x 145 x 220 (D x W x H) Weight (kg) : 6.8 INPUT Connection Type : IEC 320-C14 Nominal Voltage : 200/208/220/230/240 VAC Voltage Range : 110-300 VAC (Load at 50%) 160-280 VAC (Load at 100%) Frequency Range : 45 ~ 70 Hz Power Factor : >= 0.99 OUTPUT Connection Type : 3 x Universal socket (PRO902WS) 2 x Universal socket (PRO902WL) Nominal Voltage : 200/208/220/230/240 VAC Voltage Regulation : ±1% Frequency Range (Synchronized Range) : 47 ~ 53 Hz or 57 ~ 63 Hz Frequency Range (Batt. Mode) : 50 Hz ± 0.25 Hz or 60 Hz ± 0.3 Hz Current Crest Ratio : 3:1 Harmonic Distortion ; ≤3% THD (Linear load) ≤6% THD (Non-linear load) ALARM & INDICATORS Battery Mode : Sounding every 4 seconds Low Battery : Sounding every second Overload : Sounding twice every second Fault : Continuously sounding LCD : Load level, Battery Level, AC mode, Battery mode, Bypass mode and Fault CONNECTIVITY, CONTROL & MONITORING Front panel : Status LED, Function keys, LCD display Communication : Smart RS232* USB : Port BATTERY Standard Model Type : 12V / 9Ah Numbers : 4 Typical Recharge Time : 4 hours recover to 90% capacity Long-run Model Type : Depending on the capacity of external batteries Number : 4/6/8 Charging Current (max) : 1A / 2A / 4A / 6A Adjustable REAR PANEL 1. AC Input 2. Input circuit breaker 3. USB Communication port 4. RS-232 communication port 5. Intelligent slot 6. External battery connection (Only available for L model) 7. Output receptacles
The ProLink PRO910WL Professional II Series Online UPS is designed to provide stable and reliable power protection for servers, networking equipment, and critical electronic systems. It helps maintain continuous operation during power interruptions and protects connected devices from unstable electricity. The UPS provides a 10000VA capacity with an 8000W power rating. Additionally, it uses online double conversion technology to deliver clean and consistent power output for sensitive equipment that requires reliable energy support. The ProLink PRO910WL supports pure sine wave output for improved compatibility with different electronic devices. Moreover, its advanced power management system helps maintain stable voltage and frequency during changing power conditions. The UPS includes an LCD display that allows users to monitor important system information. Furthermore, the display provides details about input voltage, output voltage, battery status, load level, and operating conditions. The PRO910WL supports external battery configurations for extended backup time. In addition, it includes protection features against overload, short circuit, over-temperature, and battery-related issues to help protect connected equipment. The UPS is suitable for data centers, offices, industrial environments, and other locations that require dependable power backup. Therefore, it provides a practical solution for users who need continuous power protection for important systems. The ProLink PRO910WL Professional II Series Online UPS combines high power capacity, online protection technology, monitoring features, and safety functions. As a result, it delivers reliable backup power for critical applications. Specifications: Capacity: 10000VA / 8000W UPS Type: Online Double Conversion Output Waveform: Pure Sine Wave Display: LCD Display Protection: Overload, Short Circuit, Over Temperature, Battery Protection
The PCE Battery 12V 9Ah is a reliable and efficient power solution for various applications. Whether you need backup power for a UPS system or energy for your equipment, this battery ensures consistent performance. With a 12V output and 9Ah capacity, the PCE Battery delivers the power you need to keep your devices running smoothly. It’s ideal for use in security systems, emergency lighting, and other critical equipment. Designed for durability, the PCE Battery offers a long lifespan and requires minimal maintenance. Its sealed, lead-acid design ensures that it remains leak-proof and safe for use in different environments. The PCE Battery 12V 9Ah is compatible with a wide range of devices and systems. Whether you’re using it for home backup, industrial equipment, or a solar energy system, it provides dependable power when needed. This battery features advanced technology for efficient energy storage and reliable discharge. It also includes built-in safety features like overcharge and short-circuit protection, ensuring safe and stable operation. One of the key benefits of the PCE Battery is its easy installation. Whether you’re an expert or a beginner, this battery can be quickly installed and connected to your system with minimal effort. In conclusion, the PCE Battery 12V 9Ah is a perfect combination of reliability, performance, and safety. Choose this battery for a stable power supply and enjoy long-lasting energy for all your essential devices. Specifications: Voltage : 12V Capacity : 9Ah
INVO Online INH600 INVO Online UPS High Frequency 6000 VA, LCD Display Inbuilt Battery 16 x 12V/7Ah online ups system high frequency and high load management. Full Specifications : AC Input Bypass AC Output Battery Fault Screen LCD AC Input Bypass AC Output Battery Fault Screen LCD 6 KVA/4200W Half -Load 120 -300VAC, Full -Load 165V -300VAC 176V`~276VAC Frequency 45.5Hz ~ 54.5Hz Power Factor 0.95 Output Voltage 220/230/240V ± 3% Waveform True Sine wave Frequency 50/60Hz ± 0.5 Distortion <3%(linear Load); <5%(Non -linear Load) Crest Factor 3:1 Efficiency 85% Overload Capacity 110%-150%:Switch to Bypass after 1min; >150%:Shutdown afte r 200ms Short Circuit UPS output turn off and alarm Battery Model 12V Sealed Lead -Acid Voltage 36DC 96DC 240C Configuration Recharge 90% Capacity after 8 Hours charging RS232 ;SNMP (Optional) LCD & LED Utility, Inverter, Bypass, Battery, Load ,Battery Mode ,Frequency , UPS Fault Indicator Audible Alarm -Battery Discharge Utility Failure, Beep/4s;Battery Low, Beep/1s UPS Abnornmal Continuous Beep and Red Led On Noise <55db (1Meter) Temperature 0°C~40°C Humidity 10%~90% Optional 19 inch Rack -mount Dimension (W * D * H) mm 357 x 144 x 215 439x190x341 514X262X455 (Long Time Mode) 514x262x710 (Standard Model) Specifications: Specifications : AC Input Bypass AC Output Battery Fault Screen LCD AC Input Bypass AC Output Battery Fault Screen LCD 1 year warranty Manufacturer Link
UPS PCE VX / MXOnline 2KVA 1600W is a double-conversion online UPS designed for continuous protection of servers, PCs, and network systems. It delivers stable power during outages and voltage fluctuations. In addition, it uses online double-conversion technology. Therefore, it provides zero transfer time between mains and battery mode. Moreover, it delivers pure sine wave output for safe operation of sensitive equipment. Furthermore, it supports a 2KVA / 1600W load capacity. As a result, it can power multiple devices such as computers, routers, and small server setups. It also maintains stable voltage regulation under unstable input conditions. In addition, it includes built-in protection features. Therefore, it helps protect against overload, short circuit, and power instability. Moreover, it is designed for environments that require continuous uptime and reliability. Overall, UPS PCE VX / MXOnline 2KVA 1600W delivers stable backup performance, zero-interruption switching, and strong protection for critical systems. Specifications: 2KVA / 1600W capacity for professional equipment Online double-conversion UPS technology Zero transfer time for uninterrupted power Pure sine wave output for stable devices Advanced protection against overload and faults
