odel JL683A I/O ports and slots 24 RJ-45 autosensing 10/100/1000 Class 4 PoE ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only 4 SFP+ 1/10GbE ports Dimension 17.42(w) x 10.42(d) x 1.73(h) in (44.25 x 26.47 x 4.39 cm) (1U height) Processor and memory ARM Cortex-A9 @ 800 MHz, 512 MB SDRAM, 256 MB flash; packet buffer: 1.5 MB Throughput (Mpps) 95.23 Mpps Switching capacity 128 Gbps Specifications: Aruba Ion5rm 1930 24G 4SFP
AC1200 Dual Band WiFi Router with four external antennas and Parental Controls, smooth 4K video streaming from Youtube and Netflix Concurrent 300 Mbps(2.4GHz) and 867 Mbps (5GHz) throughput for fast ＷiFi connections. 4 Gigabit LAN ports provide extensive connectivity and 1 USB 2.0 port allows you to connect printers or hard drives for convenient file sharing. ASUSWRT dashboard for easy router setup and management. Intuitive ASUS Router App lets you control your network anywhere, without needing to boot up a PC. Improved coverage and multi-device performance with four external antennas — two each for the 2.4 GHz and 5 GHz bands.
D-Link Layer 2 Smart DGS-F1100-10PS-E/E The D-Link Layer 2 Smart is a 10 port Smart Managed Gigabit Switch with 8/10/100/1000 Mbps PoE ports, 2 Gigabit SFP uplink. This Switch enables users to easily connect and supply power to PoE-capable devices such as wireless Access Points (APs), IP cameras. Power Over Ethernet The DGS-F1100-10PS-E/E supports both IEEE 802.3at and IEEE 802.3af PoE protocol. With a total PoE budget of 96 was ,allowing users to each an IEEE device to the DGS-F1100-10PS-E/E without power. PoE is especially suitable for devices that are far from power outlets or when users want to minimize the of extra cables as power is supplied via the Ethernet cables themselves Features Superior connectivity Standards • 802.3 10BASE-T Ethernet (twist-pair copper) • 802.3u 100BASE-TX Fast Ethernet (twisted pair copper) • IEEE 802.3ab 1000BASE-T Gigabit Ethernet (twisted pair copper) • .3z 1000 BASE-X (fiber-optic) • .3af Power over Ethernet • 802.3at Power over Ethernet Easy to Use • 802.3x Flow Control Technical Specificatons Functionality Physical Network Interface 8 10/100/1000 Mbps PoE RJ45 port 2Gigabit SFP Ports Switching Capacity Packet Forwarding LED’s Indicator Budget MAC Address Table Power Lightning protecon Physical Characteristics Environmental Parameter Dimensions (LxWxH): 228 x 121 x 37mm Weight: 1.25kg Operating Temperature: O to 40°C (32 to 104°F) Storage Temperature: -40° to 70°C Operating Humidity: 10% to 90% non-condensing Storage Humidity: 5% to 95% non-condensing 20 Gbps 14.88 Mpps Power, SYS, LINK/ACT, PoE 96W 8K Entries External Power Adapter: 100-240~50/60Hz, 52V/1.85A 6KV DIP Switches VLAN, Extend, PoE, QoS Transmission Rate 10/100/1000Mbps Each port supports MDI / MDIX auto-flip and Network interface: 10BASE-T or 100BASE-TX, 1000 BASE-T Ethernet RJ-45 port Protocols and Standards IEEE802.3 10BASE-T IEEE 802.3u 100BASE-TX ANSI/IEEE 802.3 NWay IEEE802.3ab 1000 BASE-T IEEE802.3z 1000 BASE-X IEEE802.3x Flow Control IEEE 802.3af/at standard Specifications: Specifications 8 x 10/100/1000BASE-T PoE ports 2 x SFP ports Supports IEEE 802.3at PoE Innovative D-Link Green energy saving features Complete web interface for comprehensive switch management 1 Year warranty Manufacturer Link
TP-Link ES208G Omada Easy Managed Switch Overview The TP-Link ES208G is a compact and reliable 8-port Gigabit switch. It is designed for small businesses and home offices. As a result, network management becomes simple and efficient. High-Speed Gigabit Ethernet Performance This switch features 8 Gigabit Ethernet ports. Therefore, it delivers fast and stable wired connections. Moreover, it supports high-speed data transfer for demanding tasks. As a result, overall network performance improves. Easy Management with Omada SDN The ES208G supports easy web-based management. Therefore, basic configurations such as VLAN, QoS, and monitoring are simple. Moreover, it integrates with the Omada SDN platform. As a result, centralized control becomes possible. Silent and Energy-Efficient Design This switch uses a fanless design. Therefore, it operates silently. Moreover, energy-efficient technology reduces power consumption. As a result, it is ideal for offices and quiet environments. Flexible Installation Options The ES208G supports desktop and wall mounting. Therefore, it fits different setups easily. In conclusion, it is a practical and affordable managed switch solution. Specifications: 8-port Gigabit easy managed switch Fast and stable wired network connections Web-based management with VLAN & QoS Omada SDN platform support Silent fanless design Desktop or wall-mount installation
The Logitech G502 HERO Wired Gaming Mouse is designed for precise control in gaming. It uses a HERO 25K sensor that delivers accurate tracking and fast response. Additionally, it supports up to 25,600 DPI for detailed sensitivity control in different game styles. The Logitech G502 HERO Wired Gaming Mouse also offers strong customization options. It includes programmable buttons that let users assign commands for faster actions. Moreover, it provides adjustable weight tuning, which helps players balance the mouse to their preference. Therefore, it fits both casual and competitive gaming needs. This Logitech G502 HERO Wired Gaming Mouse also includes onboard memory for saving settings directly on the device. It supports RGB lighting for visual preference and uses a wired USB connection for stable performance without delay. As a result, it maintains consistent input during long gaming sessions. Overall, this mouse combines accuracy, speed, and customization in a durable wired design for everyday gaming performance. Specifications: HERO 25K sensor with up to 25,600 DPI precision tracking 11 programmable buttons for custom gaming commands Adjustable weight system for personalized balance Onboard memory for saving user profiles RGB lighting with customizable effects
The Webcam Sliding Cover is a simple privacy accessory designed to block a device’s camera when it is not in use. It helps protect user privacy on laptops, monitors, tablets, and other devices with built-in webcams. First, the cover uses a smooth sliding mechanism that opens and closes over the camera lens. In addition, it physically blocks the webcam to prevent unwanted access or accidental activation. Moreover, it works without any software, drivers, or system configuration. Furthermore, this privacy cover is available in black and white colors to match different device styles. At the same time, it uses adhesive backing for quick installation on most flat surfaces. Finally, its ultra-thin design allows laptops to close normally without obstruction. manufacturer link Specifications: Physical sliding cover for webcam privacy No software or drivers required Adhesive backing for easy installation Compatible with laptops, monitors, and tablets Ultra-thin design for normal device closing
Features • Advanced DSP and 3-level technology • Output power factor 1.0 • Active power factor correction (APFC), input power factor up to 0.99 • High efficiency 95% (up to 98% in ECO mode) • Advanced digital parallel technology • Wide input voltage range (11 0 – 288 Vac) and frequency range (40 -70Hz) • 50 I 60 Hz frequency auto sensing • Two modes of frequency conversion: 50 Hz input I 60 Hz output or 60 Hz input I 50 Hz output • Dual-input design, supporting independent bypass • Flexible battery configuration (settable 16-20 pes batteries) • Digitally controlled charger • High charging current available (Max. 12 A) • Charging voltage and current configured by demands • Linear derating in low voltage input reducing battery discharging times, extending the service life of battery • Intelligent battery management, automatic floating I equalizing charge control, charger dormancy control, increasing battery life by 50% • Ability to switch on the UPS with batteries • Settable delayed start time when mains power is restored, reducing the impact on power grid or generator • Fan speed varies intelligently with temperature, reducing noise and extending its service life • Equipped with self-aging function • Compact internal layout, miniaturized the complete unit for small footprint • LCD+LED display, multi-functional keys operation, friendly human-machine interface • Powerful background software for parameters configuration • Advanced multi-platform communications: RS232, USB, RS485, SNMP and dry contacts communication interfaces • Effective software and hardware protection function, robust self-diagnostic function, and abundant event log for check Available Options • RS232 and smart card slot included • Optional parallel function, battery temperature compensation, SNMP card, USB, RS485 card, dry contacts, EMD, and SMS alarms Specifications Voltage range OUTPUT Output wiring Rated voltage Voltage regulation Frequency Waveform Power factor Total harmonic distortion (THDv) Crest factor Overload BATTERIES DC voltage Number of battery lnbuilt battery (standard model) Charging current Recharge time EM Efficiency Transfer time Protections Max. number of parallel connections Communications Display OTHERS Operating temperature Storage temperature Relative humidity Altitude !Prating Noise level at 1 m Dimensions (W x D x H) (mm) Packaged dimensions (W x D x H) (mm) Net weight (kg) Gross weight (kg) 110- 176 Vac (linear derating between 50% and 100% load); 176- 288 Vac (no derating) Single-phase three-wire (1 Cll + N + PE) 208 (PF=0.9) 1220 1230 1240 Vac ± 1% Synchronized to bypass in mains mode; 50 160 Hz±0.1% Hz in battery mode Sinusoidal 1 s 1% (linear load); s 4% (non-linear load) 3:1 105%- 110% for 10 min, 110%- 125% for 1 min, 126%- 150% for 30 s 192 Vdc (192- 240 Vdc settable) 16 pes (16- 20 settable) 12VI7Ahx16 I 12VI9Ahx16 Standard model: 1 A; Long time model: 5A(default), 1 – 5Asettable, 12A (optional) Standard model: 90% capacity restored in 8 hours; Long time model: depend on the capacity of battery ~ 94% at 100% load, max. 95% at 60% load,~ 98% in ECO mode Oms Short-circuit, overload, overtemperature, battery low voltage, overvoltage, undervoltage and fan failure 4 RS232 (standard), USB I RS4851 dry contacts I SNMP I baltery temperature compensation (optional) LCD+ LED O”C – 40″C -25″C – 55″C (without battery) 0 – 95% (non-condensing) s 1 000 m, derating 1% for each additional 1 00 m IP20 S55dB S58dB 191 X 465 X 711 (S), 191 X 465 X 350 (H) 191 X 495 X 711 (S), 191 X 495 X 350 (H) 310 X 654 X 941 (S), 318 X 595 X 475 (H) 310 X 685 X 941 (S), 318 X 617 X 475 (H) 53 (S), 14.5 (H) 62 (S), 16.5 (H) 61 (S), 16 (H) 70 (S), 18 (H)
Description : Porodo 9D Wireless/Wired RGB Gaming Mouse – Built-in Rechargeable Battery -Breathing RGB lighting -1.5m Type-C Braided Cable -600mAh Built-in Battery -100 IPS Tracking Speed -Wireless 2.4G -Up to 10000 DPI
The Logitech Rally Plus Video Conferencing Kit (960-001242) is a modular conferencing system designed for large and extra-large meeting rooms. It combines a premium PTZ camera, two speakers, and two microphone pods to deliver clear video and audio coverage across wide spaces. Additionally, it connects via USB for simple integration with meeting room computers and conferencing platforms. This system features a 4K Ultra HD camera with 15x HD zoom, along with pan and tilt control for flexible framing. Moreover, it uses RightSight technology to automatically frame participants and adjust during meetings for a more natural experience. The Logitech Rally Plus Video Conferencing Kit includes two high-performance speakers and two mic pods with beamforming technology. In addition, RightSound technology uses AI to reduce background noise, balance voices, and improve speech clarity during calls. The system also supports expansion with additional mic pods, allowing coverage for larger groups. Therefore, it is suitable for conference rooms, boardrooms, and enterprise collaboration environments that require reliable audio and video performance. Specifications: 4K Ultra HD PTZ camera with 15x HD zoom Dual speakers with high-performance audio output Two mic pods with beamforming voice pickup RightSight and RightSound AI technologies Modular system expandable up to 7 mic pods
MSI PRO Z790-P WIFI ProSeries LGA 1700 Intel DDR5 (911-7E06-056) is designed by MSI for stable performance in gaming and productivity systems. MSI builds this motherboard for Intel 12th, 13th, and 14th Gen processors with strong power delivery and modern connectivity. MSI PRO Z790-P WIFI ProSeries LGA 1700 Intel DDR5 (911-7E06-056) supports the Intel Z790 chipset with an LGA 1700 socket. Additionally, it supports DDR5 memory with overclocking speeds up to 7000+ MHz for high-performance computing. It includes four DDR5 DIMM slots with up to 256GB total memory capacity. Moreover, it supports PCIe 5.0 for GPUs and multiple M.2 slots for fast NVMe storage expansion. MSI equips the board with Intel 2.5Gbps LAN and integrated Wi-Fi 6E for fast wired and wireless networking. Therefore, it ensures stable connectivity for gaming, streaming, and work tasks. It also includes extended heatsinks and thermal solutions for better temperature control. Furthermore, the board supports USB 20Gbps Type-C and multiple USB ports for modern peripherals. MSI PRO Z790-P WIFI ProSeries LGA 1700 Intel DDR5 (911-7E06-056) delivers stable power, fast memory support, and strong connectivity for high-performance PC builds. Specifications: Supports Intel 12th, 13th, and 14th Gen CPUs (LGA 1700) DDR5 memory support up to 7000+ MHz overclocking PCIe 5.0 support for next-gen GPUs Wi-Fi 6E and 2.5Gbps LAN connectivity Multiple M.2 slots with advanced cooling design
