Hawk Ups 1500VA Input: Phase: Single + GND. Voltage Range: 165-275V/ 82V-138V. Frequency: 50/60Hz +- 10%. Output: Voltage Range: 220/230/240/110/120V +- 10%. Wave Form: Sine wave ( Mains), Square Waves (inverter). Frequency: 50/60Hz +- 1% (Batter Mode). Crest Factor: 3:1. Transfer time: <10ms. Protection: Energy rating: 320 Joules Instantaneous response. Test Standard: IEEE 587 Cat. A&B. Noise Filtering: EMI/RFI: Full Time Suppression. Communication: RS232 or USB with PC monitoring software and cable (optional). Battery: Type: Sealed Lead-acid. Quantity: (x2) 12V8A. Backup Time: 15-20min depends on the load.
Specifications : UPS Type Tower Phase Single phase with ground Rating (VA) 1000 Nominal Power (W) 800 Standard Model Dimension (mm) 282 x 145 x 220 (D x W x H) Weight (kg) 9.8 Long-run Model Dimension (mm) 282 x 145 x 220 (D x W x H) Weight (kg) 4.1 INPUT Connection Type IEC 320-C14 Nominal Voltage 200/208/220/230/240 VAC Voltage Range 110-300 VAC (Load at 50%) 160-280 VAC (Load at 100%) Frequency Range 45 ~ 70 Hz Power Factor >= 0.99 OUTPUT Connection Type 3 x Universal socket (PRO901WS) 2 x Universal socket (PRO901WL) Nominal Voltage 200/208/220/230/240 VAC Voltage Regulation ±1% Frequency Range (Synchronized Range) 47 ~ 53 Hz or 57 ~ 63 Hz Frequency Range (Batt. Mode) 50 Hz ± 0.25 Hz or 60 Hz ± 0.3 Hz Current Crest Ratio 3:1 Harmonic Distortion ≤3% THD (Linear load) ≤6% THD (Non-linear load) ALARM & INDICATORS Battery Mode Sounding every 4 seconds Low Battery Sounding every second Overload Sounding twice every second Fault Continuously sounding LCD Load level, Battery Level, AC mode, Battery mode, Bypass mode and Fault CONNECTIVITY, CONTROL & MONITORING Front panel Status LED, Function keys, LCD display Communication Smart RS232* USB Port BATTERY Standard Model Type 12V / 9Ah Numbers 2 Typical Recharge Time 4 hours recover to 90% capacity Long-run Model Type Depending on the capacity of external batteries Number 2 or 3 Charging Current (max) 1A / 2A / 4A / 6A Adjustable manufacturer link
The Beco Mini DC UPS 8800mAh delivers compact and reliable power backup for small DC devices. It offers emergency power without bulky hardware. This helps protect devices during brief outages or unstable power. Users enjoy continuous operation with confidence. Moreover, the Beco Mini DC UPS features an 8800mAh battery for extended backup time. It supports devices like routers, cameras, and small electronics. This ensures continuous functionality when mains power fails. Backup power stays dependable. In addition, the DC UPS supports automatic switching when power cuts occur. It detects outages instantly and activates backup power without delay. This keeps your devices running smoothly. Protection remains seamless and reliable. Furthermore, the Beco Mini DC UPS includes stable DC output for sensitive electronics. Power delivery stays steady even under load. This helps reduce risk of damage. Devices operate without sudden stops. Also, the UPS delivers a compact and portable design for easy placement anywhere. You can install it near devices without taking much space. This adds convenience for small homes and offices. In addition, the Beco Mini DC UPS 8800mAh supports multiple connection options for flexible use. It works with DC devices requiring uninterrupted power. Also, the compact and sturdy casing improves durability for daily use. The build feels reliable and long‑lasting. Users can trust the UPS for regular backup needs. Overall, the Beco Mini DC UPS 8800mAh delivers dependable backup power, seamless switching, and flexible use in a compact form. It is ideal for small DC devices needing continuous power and stable operation. Specifications: MINI DC UPS POE 8800mah, 17W Built-in Lithium Battery 2200mAh*4 5VDC USB output, 3*Sockets DC output Interface 5V/9V/12V Over charge, Over discharge, Overload, & Short circuit protection Microprocessor controller guaranties high reliability Multi-LED Status Indicator For: Routers, CCTVs, Modem, Wireless Phones, Monitors, PSP, and others
Specifications : Output Max Configurable Power (Watts) 6.0kWatts / 6.0kVA Output Voltage Note Configurable for 220 : 230 or 240 nominal output voltage Efficiency at Full Load 94.0 % Output Voltage Distortion 1 % Output Frequency (sync to mains) 50/60 Hz +/- 3 Hz Sync to mains Other Output Voltages 220 V, 240 V Load Crest Factor 3 : 1 Topology Double conversion online Waveform type Sine wave Bypass Internal bypass (automatic and manual) Input Input frequency 40 – 70 Hz Auto sensing Input voltage range for main operations 110 – 300 Half load, 176 – 300 Full loadV Efficiency at Full Load 94.0 % Other Input Voltages 220 V, 240 V Batteries & Runtime Battery type Lead-acid battery Typical recharge time 7hour(s) Nominal Battery Voltage 192 V Expected Battery Life (years) 3 – 5 Battery Charge Power (Watts) 235 Watts Runtime View Runtime Graph Communications & Management Interface Port(s) DB-9 RS-232, USB Control panel Multifunction LCD status and control console Audible Alarm Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm Emergency Power Off (EPO) Yes Available SmartSlot™ Interface Quantity 1 Surge Protection and Filtering Surge energy rating 600Joules Physical Maximum Height 173MM, 17.3CM Maximum Width 438MM, 43.8CM Maximum Depth 710MM, 71.0CM Net Weight 61.0KG Shipping weight 71.0KG Shipping Height 1232MM, 123.19CM Shipping Width 600MM, 60.0CM Shipping Depth 836MM, 83.6CM Color Black Environmental Operating Temperature 0 – 40 °C Operating Relative Humidity 0 – 95 % Operating Elevation 0 – 3000meters Storage Temperature -15 – 60 °C Storage Relative Humidity 0 – 95 (Non-condensing) % Storage Elevation 0 – 15000meters Audible noise at 1 meter from surface of unit 55.0dBA Online thermal dissipation 1172.0BTU/hr Protection Class IP20 Conformance Approvals CE, EAC, EN/IEC 62040-1, EN/IEC 62040-2, TISI Standard warranty 2 years repair or replace Sustainable Offer Status RoHS Compliant Warranty : 1 year https://www.apc.com/shop/dk/en/products/APC-Easy-UPS-On-Line-SRV-6000VA-RM-230V-with-Rail-Kit/P-SRV6KRIRK
Legrand Ups Keor SPX Line Interactive 1KVA/600W- 310302 Specifications : Le grand ups keor spx 1kva 310302 UPS 1KVA 1000VA
Features and performances x Outstanding efficiency and overload. x Perfect management and limitation of AC sources. x Power shaving of the consumption peaks. x Automatic allocation of the power available. x Active filtering of the load steps on the genset. x Automatic protection of the sources against overload. x Powerful multi-stage PFC charger. x Ultra-short transfer time (from 0 to 15ms max.). x Automatic and efficient stand-by. x Compatible with AC coupling. x Display, programming and data logging. x RS-232 communication for remote supervision. x iPS Dim. : 44.50x20x17.2( LxWxH cm ) , 17.50 x 7.87×6.8 ( LxWxH inch) x Carton box Dim.: 53.5×30.5×30.5 (LxWxH cm) , 21.65×11.8×12 (LxWxH inch) x Weight : 25Kg ( 55lbs ) Model iPS 3700-24 Inverter Nominal battery voltage 24V Input voltage range 19 – 34V Continuous power @ 25°C 2000W Power 30 min. @ 25°C 2800W Power 25 sec. @ 25°C 5.6kVA Maximum load Up to short-circuit Maximum asymmetric load Up to Continuous power Load detection (stand-by) 2 to 25 W Maximum efficiency 86 – 90% Consumption OFF/Stand-by/ON 3W / 9W / 70W Output voltage Sine wave 220Vac (+/- 2%) / 190-245Vac Dynamic behavior 5 ms (on load change 0 to 100%) Overload and short-circuit Automatic disconnection up to 10 times restart attempt Overheat protection Warning before shut – with automatic restart Battery charger 6 step adjustable : I-U-Uo-Equalize-Uo(low)-U(periodic) Charging current adjustable 0 – 45A Maximum input voltage 265Vac Input AC voltage range Adjustable threshold from 150 to 265Vac Battery control Absorption end By duration 2 / 0.25 – 10 h or by current – / 4 – 30A Absorption voltage** 28.8 / 19 – 34V Periodic absorption voltage** 19 – 34V Floating voltage** 27.2 / 19 – 34V Reduced floating voltage 19 – 34V Equalization** By number of cycles (1 – 100) or at set interval (52 weeks) Equalization end By duration 4 / 0.25 – 10 h or by current – / 4 – 30A Deep-discharge protection 21.6 / 19 – 34V Reduced floating time 0 – 32 days Periodic absorption time 0 – 10 hours General data iPS 3700-24 Auxiliary Output 2 independent Transistor short circuit protected outputs Auxiliary Input 2 Opto Coupler Programmable Input 10V Æ 60VDC Net Weight 25Kg ( 55lbs ) Weight with the cartoon box 26.2Kg (57.5lbs) 1 Year warranty
APC UPS Accessories SURTRK APC Smart-UPS RT 19″ Rail Kit 1 – 2.2KVA
Features • Advanced DSP and 3-level technology • Output power factor 1.0 • Active power factor correction (APFC), input power factor up to 0.99 • High efficiency 95% (up to 98% in ECO mode) • Advanced digital parallel technology • Wide input voltage range (11 0 – 288 Vac) and frequency range (40 -70Hz) • 50 I 60 Hz frequency auto sensing • Two modes of frequency conversion: 50 Hz input I 60 Hz output or 60 Hz input I 50 Hz output • Dual-input design, supporting independent bypass • Flexible battery configuration (settable 16-20 pes batteries) • Digitally controlled charger • High charging current available (Max. 12 A) • Charging voltage and current configured by demands • Linear derating in low voltage input reducing battery discharging times, extending the service life of battery • Intelligent battery management, automatic floating I equalizing charge control, charger dormancy control, increasing battery life by 50% • Ability to switch on the UPS with batteries • Settable delayed start time when mains power is restored, reducing the impact on power grid or generator • Fan speed varies intelligently with temperature, reducing noise and extending its service life • Equipped with self-aging function • Compact internal layout, miniaturized the complete unit for small footprint • LCD+LED display, multi-functional keys operation, friendly human-machine interface • Powerful background software for parameters configuration • Advanced multi-platform communications: RS232, USB, RS485, SNMP and dry contacts communication interfaces • Effective software and hardware protection function, robust self-diagnostic function, and abundant event log for check Available Options • RS232 and smart card slot included • Optional parallel function, battery temperature compensation, SNMP card, USB, RS485 card, dry contacts, EMD, and SMS alarms Specifications Voltage range OUTPUT Output wiring Rated voltage Voltage regulation Frequency Waveform Power factor Total harmonic distortion (THDv) Crest factor Overload BATTERIES DC voltage Number of battery lnbuilt battery (standard model) Charging current Recharge time EM Efficiency Transfer time Protections Max. number of parallel connections Communications Display OTHERS Operating temperature Storage temperature Relative humidity Altitude !Prating Noise level at 1 m Dimensions (W x D x H) (mm) Packaged dimensions (W x D x H) (mm) Net weight (kg) Gross weight (kg) 110- 176 Vac (linear derating between 50% and 100% load); 176- 288 Vac (no derating) Single-phase three-wire (1 Cll + N + PE) 208 (PF=0.9) 1220 1230 1240 Vac ± 1% Synchronized to bypass in mains mode; 50 160 Hz±0.1% Hz in battery mode Sinusoidal 1 s 1% (linear load); s 4% (non-linear load) 3:1 105%- 110% for 10 min, 110%- 125% for 1 min, 126%- 150% for 30 s 192 Vdc (192- 240 Vdc settable) 16 pes (16- 20 settable) 12VI7Ahx16 I 12VI9Ahx16 Standard model: 1 A; Long time model: 5A(default), 1 – 5Asettable, 12A (optional) Standard model: 90% capacity restored in 8 hours; Long time model: depend on the capacity of battery ~ 94% at 100% load, max. 95% at 60% load,~ 98% in ECO mode Oms Short-circuit, overload, overtemperature, battery low voltage, overvoltage, undervoltage and fan failure 4 RS232 (standard), USB I RS4851 dry contacts I SNMP I baltery temperature compensation (optional) LCD+ LED O”C – 40″C -25″C – 55″C (without battery) 0 – 95% (non-condensing) s 1 000 m, derating 1% for each additional 1 00 m IP20 S55dB S58dB 191 X 465 X 711 (S), 191 X 465 X 350 (H) 191 X 495 X 711 (S), 191 X 495 X 350 (H) 310 X 654 X 941 (S), 318 X 595 X 475 (H) 310 X 685 X 941 (S), 318 X 617 X 475 (H) 53 (S), 14.5 (H) 62 (S), 16.5 (H) 61 (S), 16 (H) 70 (S), 18 (H)
UPS PCE EXDC-2 MAX UPS Adapter for Cameras & Modems
APC UPS Accessories APV9601 EASY UPS ON-LINE SNMP CARD, 1 – 10KVA (SRV models)
Features • Advanced DSP and 3-level technology • Output power factor 1.0 • Active power factor correction (APFC), input power factor up to 0.99 • High efficiency 95% (up to 98% in ECO mode) • Advanced digital parallel technology • Wide input voltage range (11 0 – 288 Vac) and frequency range (40 -70Hz) • 50 I 60 Hz frequency auto sensing • Two modes of frequency conversion: 50 Hz input I 60 Hz output or 60 Hz input I 50 Hz output • Dual-input design, supporting independent bypass • Flexible battery configuration (settable 16-20 pes batteries) • Digitally controlled charger • High charging current available (Max. 12 A) • Charging voltage and current configured by demands • Linear derating in low voltage input reducing battery discharging times, extending the service life of battery • Intelligent battery management, automatic floating I equalizing charge control, charger dormancy control, increasing battery life by 50%• Ability to switch on the UPS with batteries • Settable delayed start time when mains power is restored, reducing the impact on power grid or generator • Fan speed varies intelligently with temperature, reducing noise and extending its service life • Equipped with self-aging function • Compact internal layout, miniaturized the complete unit for small footprint • LCD+LED display, multi-functional keys operation, friendly human-machine interface • Powerful background software for parameters configuration • Advanced multi-platform communications: RS232, USB, RS485, SNMP and dry contacts communication interfaces • Effective software and hardware protection function, robust self-diagnostic function, and abundant event log for check Available Options • RS232 and smart card slot included • Optional parallel function, battery temperature compensation, SNMP card, USB, RS485 card, dry contacts, EMD, and SMS alarms Rear Panel 1. RS232 2. EPO 3. Parallel Port (optional) 4. USB (optional) 5. Temperature Detection (optional) 6. Intelligent Slot 7. Reserved: for manual bypass or battery breaker or outlets ect. 8.Fans 9. Bypass Breaker 10. Input Breaker 11.GND 12.Terminals and Cover http://en.eastups.com/EA900G4610kVA/6754.jhtml
PCE EX Online 2 KVA 1800W is a double-conversion online UPS designed to deliver continuous and stable power protection for computers, servers, and sensitive electronic equipment. It ensures uninterrupted operation during outages and unstable voltage conditions. In addition, PCE EX Online 2 KVA 1800W uses true online double-conversion technology. Therefore, it provides zero transfer time between mains and battery mode. Moreover, it delivers a pure sine wave output for safe and stable power to connected devices. Furthermore, PCE EX Online 2 KVA 1800W supports a 2kVA / 1800W load capacity. As a result, it can handle multiple devices such as PCs, routers, and small servers. It also maintains stable voltage regulation for sensitive workloads. In addition, PCE EX Online 2 KVA 1800W includes advanced protection features. Therefore, it helps protect against overload, short circuits, and power fluctuations. Moreover, it is designed for consistent performance in professional and office environments. Overall, PCE EX Online 2 KVA 1800W delivers reliable, uninterrupted, and high-quality backup power for critical systems. Specifications: 2kVA / 1800W power capacity for multiple devices Online double-conversion UPS technology Zero transfer time for uninterrupted power Pure sine wave output for safe device operation Protection against overload and voltage fluctuations
APC UPS Accessories SURT48XLBP APC Smart-UPS RT 48V 1/2KVA SURT models Battery Pack
APC Easy UPS SRV, 1600 Watts / 2 KVA, Online double conversion, Sine wave, 230V, Multi-function LCD status and control console, Surge Protection and Filtering, Generator compatible, Management Software, USB, 2 years warranty Electronics and Battery
Vertiv Emerson Liebert itON LI32121CT00 800VA
The PROLINK Enerhome PRO2000 Line Interactive UPS is designed to provide reliable backup power and voltage protection for computers, networking equipment, and home electronics. It helps keep connected devices running during short power interruptions and unstable power conditions. The UPS provides a 2KVA capacity and uses Automatic Voltage Regulation (AVR) technology. Additionally, it helps correct voltage fluctuations and provides stable power output to improve equipment protection. The PROLINK PRO2000 features a line interactive design that allows quick switching to battery mode during power failures. Moreover, it provides efficient backup support for essential devices while reducing power-related risks. The UPS includes protection features against overload, short circuit, surge, and low battery conditions. Furthermore, these safety functions help protect connected equipment during different operating situations. The PROLINK Enerhome PRO2000 is suitable for homes, offices, and small workspaces that need dependable power backup. Therefore, it provides a practical solution for protecting computers, routers, and other important electronic devices. The compact design makes the UPS easy to install in different environments. In addition, its reliable performance helps users maintain stable operation during unexpected power interruptions. The PROLINK Enerhome PRO2000 2KVA Line Interactive UPS combines backup power, AVR voltage regulation, and protection features. As a result, it provides a reliable power solution for everyday electronic equipment. Specifications: Capacity: 2000VA / 1200W Technology: Line Interactive with AVR Protection: Overload, Short Circuit, Surge, Low Battery Protection Input Voltage: 220VAC Output Voltage: 220VAC
The Twist Online High Frequency UPS 6KVA TWUP6000/HF provides continuous backup power for servers, networking systems, and critical equipment. It uses online double conversion technology for stable and clean power delivery. Additionally, the high-frequency design improves efficiency and reduces transfer interruptions. Moreover, the UPS includes an LCD display for real-time monitoring and system alerts. It features internal 16x12V/9Ah batteries for backup operation during outages. Therefore, it protects connected devices from voltage fluctuations, overloads, and sudden power loss. Furthermore, the TWUP6000/HF supports pure sine wave output for sensitive electronic equipment. It also includes overload, short-circuit, and overheating protection for safer operation. Additionally, the tower design fits office, server room, and IT environments easily. Specifications: 6KVA online double conversion UPS technology Internal 16x12V/9Ah rechargeable batteries LCD display for real-time monitoring Pure sine wave output for stable power delivery Overload and short-circuit protection system
Specifications : Le grand ups keor spx 800va 310301 1year warranty ups 800va
INVO Online INH600 INVO Online UPS High Frequency 6000 VA, LCD Display Inbuilt Battery 16 x 12V/7Ah online ups system high frequency and high load management. Full Specifications : AC Input Bypass AC Output Battery Fault Screen LCD AC Input Bypass AC Output Battery Fault Screen LCD 6 KVA/4200W Half -Load 120 -300VAC, Full -Load 165V -300VAC 176V`~276VAC Frequency 45.5Hz ~ 54.5Hz Power Factor 0.95 Output Voltage 220/230/240V ± 3% Waveform True Sine wave Frequency 50/60Hz ± 0.5 Distortion <3%(linear Load); <5%(Non -linear Load) Crest Factor 3:1 Efficiency 85% Overload Capacity 110%-150%:Switch to Bypass after 1min; >150%:Shutdown afte r 200ms Short Circuit UPS output turn off and alarm Battery Model 12V Sealed Lead -Acid Voltage 36DC 96DC 240C Configuration Recharge 90% Capacity after 8 Hours charging RS232 ;SNMP (Optional) LCD & LED Utility, Inverter, Bypass, Battery, Load ,Battery Mode ,Frequency , UPS Fault Indicator Audible Alarm -Battery Discharge Utility Failure, Beep/4s;Battery Low, Beep/1s UPS Abnornmal Continuous Beep and Red Led On Noise <55db (1Meter) Temperature 0°C~40°C Humidity 10%~90% Optional 19 inch Rack -mount Dimension (W * D * H) mm 357 x 144 x 215 439x190x341 514X262X455 (Long Time Mode) 514x262x710 (Standard Model) Specifications: Specifications : AC Input Bypass AC Output Battery Fault Screen LCD AC Input Bypass AC Output Battery Fault Screen LCD 1 year warranty Manufacturer Link
Professional II Series (1P/1P) PROLiNK Professional II Series (1P/1P) is a single-phase UPS system using microprocessor controlled true online double conversion technology and it can be used to provide protection for critical loads especially on IT applications. High input power factor correction in the system improves efficiency and reduces overall losses.
The Twist Online High Frequency UPS 1KVA TWUP1000/HF delivers stable backup power for servers, networking devices, and office equipment. It uses online double conversion technology for continuous clean power output. Additionally, the high-frequency design improves efficiency and reduces switching interruptions. Moreover, the UPS includes an LCD display for real-time monitoring and system status updates. It also features built-in 2x12V/9Ah batteries for backup operation during outages. Therefore, it protects connected devices from voltage fluctuations, surges, and power loss. Furthermore, the TWUP1000/HF supports pure sine wave output for sensitive electronic equipment. It also includes overload, short-circuit, and overheating protection for safer operation. Additionally, the compact tower design fits home, office, and IT environments easily. Specifications: 1KVA online double conversion UPS technology Built-in 2x12V/9Ah rechargeable batteries LCD display for system monitoring Pure sine wave output for stable power Overload and short-circuit protection system
APC UPS Accessories SRVRK1 APC Easy UPS RAIL KIT, 700MM, 1 – 10KVA (Rackable SRV models)
The Twist Online High Frequency UPS 2KVA TWUP2000/HF provides continuous backup power for servers, workstations, and networking equipment. It uses online double conversion technology for stable and clean power delivery. Additionally, the high-frequency design improves efficiency and reduces transfer interruptions. Moreover, the UPS includes an LCD display for real-time monitoring and system alerts. It also features internal 4x12V/9Ah batteries for backup operation during outages. Therefore, it protects connected devices from voltage fluctuations, overloads, and power failures. Furthermore, the TWUP2000/HF supports pure sine wave output for sensitive electronics and professional equipment. It also includes overload, short-circuit, and surge protection for safer operation. Additionally, the compact tower design fits office, server room, and IT environments easily. Specifications: 2KVA online double conversion UPS technology Internal 4x12V/9Ah rechargeable batteries LCD display for real-time monitoring Pure sine wave output for stable power delivery Overload and short-circuit protection system
Powerology Portable Power Generator,140400mAh Powerology 140400mAh Power Generator 500W Pure Sine-Wave Output -45W USB-C Power Delivery -18W USB-A Quick Charge -3.1A Dual USB Optimal Charge -220V UK AC Output -750W Max Surge
