The TP‑Link Deco XE75 AXE5400 Tri‑Band WiFi 6E Mesh System provides fast and reliable whole‑home Wi‑Fi coverage using the 6 GHz band. It includes three units that work together under one network name and password. Additionally, each unit delivers tri‑band speeds up to 5,400 Mbps. It supports up to 200 devices simultaneously, which makes it ideal for busy homes. Moreover, the system covers up to 7,200 ft², reducing dead zones and buffering. It also uses AI‑driven mesh algorithms that learn your environment. Therefore, the network automatically gives the strongest connection as you move around. Deco HomeShield adds security for all devices. It includes access control, real‑time IoT protection, and a malicious site blocker. In addition, setup is guided step by step through the Deco app. This makes installation and management easy even for beginners. Each Deco unit has three auto‑sensing Gigabit Ethernet ports. These ports allow wired connections for computers, smart TVs, or gaming consoles. They also enable the system to act as a router or satellite node in an existing mesh setup. Specifications: • AXE5400 tri‑band Wi‑Fi 6E speeds up to 5,400 Mbps• Whole‑home coverage up to 7,200 ft² with 3 units• Supports up to 200 connected devices• AI‑driven mesh technology for seamless roaming• Deco HomeShield security with access control and protection
TP-Link TL-POE170S PoE++ Injector for Powerful Network Devices The TP-Link TL-POE170S PoE++ Injector supplies both power and data over a single Ethernet cable to compatible devices. It supports the PoE++ standard (IEEE 802.3bt), allowing higher power delivery for devices like high-end wireless access points and PTZ cameras. Setup is simple — connect the injector between your network switch and a PoE-enabled device for instant power and connectivity. The compact design fits neatly near networking equipment without taking extra space. Moreover, the TL-POE170S injector delivers stable and efficient power, helping connected devices run reliably under heavy load. Its robust construction ensures long-lasting performance for home or business networks. Built-in safeguards protect against overload, short circuits, and power surges for safer operation. LED indicators show power and network status at a glance for easy monitoring. This PoE++ injector is ideal for powering devices in locations without nearby power outlets. Because power and data travel over a single cable, installation is cleaner and more cost-effective. Overall, the TP-Link TL-POE170S PoE++ Injector combines convenience, compatibility, and reliable performance for demanding network setups. Specifications: PoE++ support (IEEE 802.3bt) for higher power delivery Supplies power and data over one Ethernet cable Built-in protection against overload and short circuits LED indicators for power and network activity Compact design for flexible placement
odel JL683A I/O ports and slots 24 RJ-45 autosensing 10/100/1000 Class 4 PoE ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only 4 SFP+ 1/10GbE ports Dimension 17.42(w) x 10.42(d) x 1.73(h) in (44.25 x 26.47 x 4.39 cm) (1U height) Processor and memory ARM Cortex-A9 @ 800 MHz, 512 MB SDRAM, 256 MB flash; packet buffer: 1.5 MB Throughput (Mpps) 95.23 Mpps Switching capacity 128 Gbps Specifications: Aruba Ion5rm 1930 24G 4SFP
MARSRIVA Smart Mini DC UPS KP2 Series | 18 Watts 10000mAh | 0ms AC to DC Transfer | Flame Retardant | Wall Mount Slots | 1 x Passive PoE, 2 x DC and 1 x USB Output Ports | KP2 BLACK Keep Wi-Fi Power On Output:18W (Max.) or 30W (Max.) ● With 1 * Passive PoE, 2 * DC and 1 * USB output ports, DC UPS can power up multiple devices simultaneously. ● AC to DC 0ms transfer technology keeps your devices working when electricity is ON/OFF shifting. ● With wall-mount slots on the back, DC UPS can be mounted on the wall easily. ● Air cooling system provides maximum heat dissipation, ensuring the long-term stability of UPS. ● V-0 flame retardant product housing secures you and your property. ● 16000mAh high-capacity battery (KP2 Plus, KP2 Ultra) provides longer backup time. ● 30W high-power output (KP2 Pro, KP2 Ultra) provides better compatibility.
PCE M8-700 UPS (line-interactive) — 700 VA / 360 W backup unit for 220–240 V input. Protects PCs, routers, small electronics from outages and voltage swings. The PCE M8-700 is a line-interactive UPS designed for home or small office use. It provides backup power, voltage regulation (AVR), surge protection, and supports automatic switching during outages. Ideal for desktop PCs, network gear, monitors, or point-of-sale systems. Features & Capabilities Line-interactive topology: regulates input voltage without switching to battery when voltage fluctuates mildly. Automatic Voltage Regulation (AVR) to correct undervolt/overvolt conditions. Simulated (stepped) sine wave output in battery mode. Surge, overload, short circuit, discharge protections built in. Cold start capability (ability to power on from battery with no mains) LED + audible alarms for status (battery mode, overload, fault) USB / RS232 interface in some variants for power management (shutdown, monitoring) Technical Specifications What “Input 220–240 VAC, 50/60 Hz, 3.7 A” Means (and Caveats) If the specification you’re giving is “3.7 A” at input, that corresponds to a maximum input current draw when the UPS is handling a heavy load or during charging cycles. At 230 V × 3.7 A ≈ 850 W of input capacity. The unit’s 360 W output means there’s overhead for losses, inverter inefficiency, battery charging, etc. The UPS must operate within the stated voltage and frequency ranges — if input is too low or too high, it may switch to battery or go into protection mode.
WiWU 20W fast Charger for Mobile Phone with USB C Quick Power Adapter in white Wall charger
The Logitech Brio 501 Webcam delivers clear video with Full HD resolution for meetings and streaming. It ensures a professional appearance in calls. Moreover, RightLight 4 adjusts lighting automatically. This helps you look clear in low or uneven light. The auto-framing feature keeps you centered during movement. This improves your presence during meetings. In addition, Show Mode lets you tilt the camera to present objects. This is useful for desk demonstrations. Dual noise-reducing microphones capture clear voice audio. Background noise is reduced during calls. It also includes a built-in privacy shutter for security. USB-C connectivity ensures easy setup and compatibility. The Logitech Brio 501 Webcam is a reliable choice for video calls, streaming, and daily communication. Specifications: Resolution : 1080p/30fps, 720p/60fps Camera : 4 Megapixels Hardware Zoom : Digital 4x Built-in microphone type : Stereo microphone USB Connectivity : USB-C Plug and Play Color : Graphite
Firstly the ASRock Z890 Pro-A WiFi DDR5 Motherboard is a high-performance ATX board designed for Intel CPUs. It supports DDR5 memory up to 9066+ MHz (OC) and offers robust power delivery with a 16+1+1+1+1 phase VRM design. Furthermore key features include a PCIe 5.0 x16 slot for next-gen GPUs, multiple PCIe 4.0 slots, and four M.2 slots (one PCIe Gen5 and three PCIe Gen4) for high-speed storage solutions. The motherboard also provides four SATA 6Gb/s ports for additional storage options. Moreover for connectivity, it boasts a 2.5Gbps LAN port, Wi-Fi 6E, and Bluetooth 5.3. The rear I/O panel includes a Thunderbolt 4 Type-C port, a USB 3.2 Gen2x2 Type-C port, a USB 3.2 Gen2 Type-A port, two USB 3.2 Gen1 ports, and four USB 2.0 ports, offering ample options for peripherals. Also audio is handled by the Realtek ALC897 codec, delivering 7.1 channel HD audio. The board’s design features a sleek aesthetic with customizable RGB lighting, making it a visually appealing choice for gamers and PC builders. Finally in terms of thermal performance, the ASRock Z890 Pro-A WiFi DDR5 Motherboard maintains VRM temperatures below 68°C under heavy loads, thanks to its efficient heatsink design. The motherboard’s layout and features make it suitable for high-end gaming rigs and content creation workstations. Specifications: Socket : LGA1851 Memory : 4x DDR5 Graphics : Intel Xe LPG Wireless LAN : WIFI 6E Module
WiWU Linker 721HD Hub – Compact USB-C hub with 7 ports including 100W PD, dual USB-A, USB-C data, HDMI 4K60, and dual SD/TF slots.Aluminum body, plug‑and‑play compatibility with MacBooks and modern USB‑C devices—ideal for laptop expansion. Model: Linker 721HD (WiWU) Material: Aluminum-alloy shell Ports: 2 × USB‑A 3.1 1 × USB‑C 3.1 (data) 1 × USB‑C PD power delivery (up to 100 W) 1 × HDMI (4K @ 60 Hz) SD card slot + micro‑SD (TF) slot (USB 3.0 speed) Ports: 2 × USB‑A 3.1 1 × USB‑C 3.1 (data) 1 × USB‑C PD power delivery (up to 100 W) 1 × HDMI (4K @ 60 Hz) SD card slot + micro‑SD (TF) slot (USB 3.0 speed) Cable: Fixed USB‑C male cable (approx. 15 cm) Compatibility: Plug-and-play with USB-C/Thunderbolt 3/4 devices (MacBook, XPS, Chromebooks, mobile devices with DP-Alt Mode) Design: Compact, space gray finish optimized for travel/work setups Weight: ~150 g
