MikroTik RB2011UiAS-RM The MikroTik RB2011UiAS-RM is a low cost multi port device series. Designed for indoor use, and available in many different cases, with a multitude. The RB2011 is powered by RouterOS, a fully featured routing operating system . which has been continuously improved for fifteen years. Dynamic routing, hotspot. firewall, MPLS, VPN, advanced quality of service, load balancing and bonding, real-time . configuration and monitoring – just a few of the vast number of features supported by RouterOS. RouterBOARD 2011UiAS-RM, in comparison with RB2011L series, not only has five Gigabit . LAN ports and five Fast Ethernet LAN ports, but also has RJ45 serial port, USB port and more RAM. (128MB instead of 64MB). Also, it has RouterOS L5 license (instead of L4) and nice touchscreen LCD for configuration. SFP cage is also present (SFP module not included!) There is PoE output function for port #10 – it can power other PoE capable devices with the same . voltage as applied to the unit. Maximum load on the port is 500mA. Tested and recommended to use with MikroTik SFP modules: S-85DLC05D. S-31DLC20D and S-35/53LC20D (not included) RouterBOARD 2011UiAS-RM comes with 1U rackmount enclosure, LCD panel and power supply. Details Product code RB2011UiAS-RM Architecture MIPSBE CPU AR9344 CPU core count 1 CPU nominal frequency 600 MHz Switch chip model AR8327 Dimensions 443 x 92 x 44 mm RouterOS license 5 Operating System RouterOS Size of RAM 128 MB Storage size 128 MB Storage type NAND MTBF Approximately 200’000 hours at 25C Tested ambient temperature -40°C to 60°C Suggested price $119.00 Powering Details Number of DC inputs 2 (DC jack, PoE-IN) DC jack input Voltage 8-30 V Max power consumption 28 W Max power consumption without attachments 6 W Cooling type Passive PoE in Passive PoE PoE in input Voltage 8-30 V PoE-out Details PoE-out ports Ether10 PoE out Passive PoE Max out per port output (input 18-30 V) 510 mA Max total out (A) 510 mA Specifications: Specifications Product code RB2011UiAS-RM Architecture MIPSBE CPU AR9344 CPU core count 1 CPU nominal frequency 600 MHz Switch chip model AR8327 Dimensions 443 x 92 x 44 mm RouterOS license 5 Operating System RouterOS Size of RAM 128 MB Storage size 128 MB Storage type NAND MTBF Approximately 200’000 hours at 25C 1 year warranty manufacturer link
The TP-Link JetStream 28-Port Gigabit Smart Switch is a powerful solution for enhancing your network’s efficiency. Whether you’re managing a small office or a medium-sized business, this switch delivers reliable and high-speed connectivity. Equipped with 28 Gigabit Ethernet ports, the TP-Link JetStream Switch ensures fast and stable connections for all your devices. This means smoother data transfers, better streaming quality, and reduced network congestion. With advanced features like VLAN support, Quality of Service (QoS), and IGMP Snooping, the TP-Link JetStream Gigabit Smart Switch allows for better traffic management and improved network performance. These features make it easier to prioritize critical applications and manage bandwidth effectively. The TP-Link 28-Port Gigabit Smart Switch also supports Link Aggregation, which combines multiple ports to increase bandwidth and provide a more reliable connection. This is ideal for high-traffic environments where consistent performance is key. Setting up and managing the TP-Link JetStream Gigabit Smart Switch is straightforward, thanks to its user-friendly web interface. You can easily configure settings, monitor traffic, and troubleshoot issues without needing advanced IT knowledge. Designed for durability, the TP-Link JetStream Switch is built with robust components to ensure long-lasting performance. It’s an ideal investment for businesses looking to upgrade their network infrastructure. In conclusion, the TP-Link JetStream 28-Port Gigabit Smart Switch offers a combination of speed, reliability, and advanced features for optimal network management. Upgrade your network today with the TP-Link JetStream and experience seamless connectivity. Specifications: 24 Gigabit PoE+ Ports 4 Gigabit SFP Slots Integrated Omada SDN
StLab M-410 StLab M-410 HDMI Video Switch, 4-port to 1-port WEIGHT 1 kg P-TYPE Adapters BRAND StLab Specifications: Specifications WEIGHT 1 kg P-TYPE Adapters BRAND StLab
The TP-Link Omada 24-Port Gigabit Stackable L3 Managed Switch is designed for high-performance networking. This switch provides an effective solution for businesses needing reliable network management. With 24 gigabit ports, it offers fast and stable connections for multiple devices. This managed switch supports Layer 3 routing, allowing for efficient traffic management. This feature enhances your network’s performance by reducing latency and improving data transfer speeds. Additionally, the switch includes advanced security features. These features protect your network from unauthorized access and cyber threats. Setting up the TP-Link Omada 24-Port Gigabit Stackable L3 Managed Switch is simple. The user-friendly web interface makes configuration easy, even for beginners. With features like VLAN support, you can segment your network for better management. This improves overall efficiency by organizing traffic effectively. Moreover, the switch is stackable. This means you can combine multiple switches into a single unit. Stacking increases port capacity and simplifies management. This flexibility is essential for growing networks, allowing for easy expansion without major disruptions. The switch also supports advanced QoS (Quality of Service). This feature prioritizes critical applications, ensuring your most important tasks receive the necessary bandwidth. This is especially beneficial for businesses that rely on voice and video communications. Additionally, the TP-Link Omada 24-Port Gigabit Stackable L3 Managed Switch is designed for durability and performance. Its robust construction ensures longevity, making it a great investment for your network. Upgrade your business network today with the TP-Link Omada switch. Experience the benefits of a powerful, flexible, and secure networking solution. Specifications: Interface : 24× 10/100/1000 Mbps RJ45 Ports, 4× 10G SFP+ Slots, 2× USB 2.0 Ports, 1× RJ45 Console Port, 1× USB Type-C Console Port, 1× RJ45 Management Port Switching Capacity : 128Gbps
MousePad Razer FireFly Hard Edition Mouse Mat RZ02-01350100-R3M1
Features • Advanced DSP and 3-level technology • Output power factor 1.0 • Active power factor correction (APFC), input power factor up to 0.99 • High efficiency 95% (up to 98% in ECO mode) • Advanced digital parallel technology • Wide input voltage range (11 0 – 288 Vac) and frequency range (40 -70Hz) • 50 I 60 Hz frequency auto sensing • Two modes of frequency conversion: 50 Hz input I 60 Hz output or 60 Hz input I 50 Hz output • Dual-input design, supporting independent bypass • Flexible battery configuration (settable 16-20 pes batteries) • Digitally controlled charger • High charging current available (Max. 12 A) • Charging voltage and current configured by demands • Linear derating in low voltage input reducing battery discharging times, extending the service life of battery • Intelligent battery management, automatic floating I equalizing charge control, charger dormancy control, increasing battery life by 50%• Ability to switch on the UPS with batteries • Settable delayed start time when mains power is restored, reducing the impact on power grid or generator • Fan speed varies intelligently with temperature, reducing noise and extending its service life • Equipped with self-aging function • Compact internal layout, miniaturized the complete unit for small footprint • LCD+LED display, multi-functional keys operation, friendly human-machine interface • Powerful background software for parameters configuration • Advanced multi-platform communications: RS232, USB, RS485, SNMP and dry contacts communication interfaces • Effective software and hardware protection function, robust self-diagnostic function, and abundant event log for check Available Options • RS232 and smart card slot included • Optional parallel function, battery temperature compensation, SNMP card, USB, RS485 card, dry contacts, EMD, and SMS alarms Rear Panel 1. RS232 2. EPO 3. Parallel Port (optional) 4. USB (optional) 5. Temperature Detection (optional) 6. Intelligent Slot 7. Reserved: for manual bypass or battery breaker or outlets ect. 8.Fans 9. Bypass Breaker 10. Input Breaker 11.GND 12.Terminals and Cover http://en.eastups.com/EA900G4610kVA/6754.jhtml
See every detail with HD video and 10x zoom Works with your meeting and video conferencing applications Crystal-clear audio for up to 14 | 20 (standard | + expansion)
Logitech G203 Lightsync is a wired gaming mouse designed for accuracy, speed, and simple customization. It uses a classic 6-button layout and a lightweight design for everyday gaming use. Additionally, it supports RGB lighting with Logitech LIGHTSYNC for visual effects. Moreover, Logitech G203 Lightsync uses a gaming-grade optical sensor with adjustable DPI up to 8,000. Therefore, users get smooth tracking and flexible sensitivity control for different games. It connects through a USB cable and supports plug-and-play use on most systems without extra setup. In addition, the mouse includes six programmable buttons that users can customize through Logitech G HUB software. It also supports onboard profiles for quick access to saved settings. Furthermore, its primary buttons use tensioned mechanical switches for consistent click response and durability. The design stays simple and lightweight, making it suitable for both casual and competitive gaming. As a result, it offers stable control for FPS, MOBA, and general use. Meanwhile, LIGHTSYNC RGB provides 16.8 million colors for personal style and setup matching. Overall, Logitech G203 Lightsync delivers reliable performance, customizable controls, and RGB lighting in an affordable wired gaming mouse. Specifications: 8,000 DPI gaming-grade optical sensor LIGHTSYNC RGB with 16.8 million colors 6 programmable buttons via Logitech G HUB Classic 6-button lightweight design USB wired connection with plug-and-play support
Specifications : -True Double-Conversion Online UPS – Mircoprocessor control optimizes reliability – Input power factor correction – Output Power Factor 0.80. – Wide input voltage (110V – 300V) – Converter mode available – ECO mode for enegry saving (Only available for 1 – 3 KVA) – Generator compatible – Adjustable battery number only available for 6K and up models – Smart SNMP works well with either USB or RS-232 together – Emergency power off function (EPO) only available for 6K / 10K models – Optional isolation transformer available. manufacturer link
Logitech C925e Webcam Overview The Logitech C925e is a professional-grade webcam. It delivers sharp video and reliable performance. As a result, it suits business meetings, remote work, and online presentations. Full HD 1080p Video This webcam records in 1080p Full HD at 30fps. Therefore, video appears clear and detailed. Moreover, it supports H.264 video compression for smooth streaming. As a result, meetings look professional and uninterrupted. Automatic Light Correction The C925e adjusts automatically to lighting conditions. Therefore, your image stays bright and natural. Moreover, colors remain balanced in different environments. As a result, you are clearly visible in any setting. Built-In Noise-Reducing Microphone This webcam includes a built-in microphone. Therefore, your voice sounds clear and focused. Moreover, it reduces background noise during calls. As a result, communication stays professional. Easy USB Plug-and-Play The C925e connects via USB-A. Therefore, setup takes only seconds. Moreover, it works with popular video platforms. In conclusion, it is a reliable choice for business and professional use. Specifications: Video: 1080p/30fps or 720p/60fps with H.264 encoding for smooth, low-bandwidth streaming. Audio: Dual stereo microphones with noise cancellation. Security: Integrated sliding privacy shutter. Optimization: 1.2x digital zoom and manual focus via the Logi Tune desktop app
