INVO Online INH600 INVO Online UPS High Frequency 6000 VA, LCD Display Inbuilt Battery 16 x 12V/7Ah online ups system high frequency and high load management. Full Specifications : AC Input Bypass AC Output Battery Fault Screen LCD AC Input Bypass AC Output Battery Fault Screen LCD 6 KVA/4200W Half -Load 120 -300VAC, Full -Load 165V -300VAC 176V`~276VAC Frequency 45.5Hz ~ 54.5Hz Power Factor 0.95 Output Voltage 220/230/240V ± 3% Waveform True Sine wave Frequency 50/60Hz ± 0.5 Distortion <3%(linear Load); <5%(Non -linear Load) Crest Factor 3:1 Efficiency 85% Overload Capacity 110%-150%:Switch to Bypass after 1min; >150%:Shutdown afte r 200ms Short Circuit UPS output turn off and alarm Battery Model 12V Sealed Lead -Acid Voltage 36DC 96DC 240C Configuration Recharge 90% Capacity after 8 Hours charging RS232 ;SNMP (Optional) LCD & LED Utility, Inverter, Bypass, Battery, Load ,Battery Mode ,Frequency , UPS Fault Indicator Audible Alarm -Battery Discharge Utility Failure, Beep/4s;Battery Low, Beep/1s UPS Abnornmal Continuous Beep and Red Led On Noise <55db (1Meter) Temperature 0°C~40°C Humidity 10%~90% Optional 19 inch Rack -mount Dimension (W * D * H) mm 357 x 144 x 215 439x190x341 514X262X455 (Long Time Mode) 514x262x710 (Standard Model) Specifications: Specifications : AC Input Bypass AC Output Battery Fault Screen LCD AC Input Bypass AC Output Battery Fault Screen LCD 1 year warranty Manufacturer Link
PCE UPS 2400VA Raad 1200W is a line-interactive UPS designed to protect computers, routers, and office equipment from power failures and unstable voltage. It provides stable backup power during outages and supports everyday device protection. In addition, it supports Automatic Voltage Regulation (AVR). Therefore, it stabilizes fluctuating input voltage without switching to battery mode. Moreover, it helps extend battery lifespan by reducing unnecessary discharge during minor voltage changes. It also delivers 1200W output capacity for connected loads. Furthermore, it uses simulated sine wave output. As a result, it ensures compatible backup performance for standard PCs and networking devices. It also supports external battery configurations, allowing extended backup time depending on setup. In addition, it includes built-in protection features. Therefore, it helps protect against overload, short circuit, and voltage irregularities. Moreover, it provides automatic switching between mains and battery mode for uninterrupted operation. Overall, PCE UPS 2400VA Raad 1200W delivers reliable backup power, stable voltage control, and essential protection for home and office environments. Specifications: 2400VA / 1200W capacity for PCs and office devices Line-interactive UPS with AVR voltage regulation Simulated sine wave output for stable operation External battery support for extended runtime Overload and voltage protection for connected devices
Features and performances x Outstanding efficiency and overload. x Perfect management and limitation of AC sources. x Power shaving of the consumption peaks. x Automatic allocation of the power available. x Active filtering of the load steps on the genset. x Automatic protection of the sources against overload. x Powerful multi-stage PFC charger. x Ultra-short transfer time (from 0 to 15ms max.). x Automatic and efficient stand-by. x Compatible with AC coupling. x Display, programming and data logging. x RS-232 communication for remote supervision. x iPS Dim. : 44.50x20x17.2( LxWxH cm ) , 17.50 x 7.87×6.8 ( LxWxH inch) x Carton box Dim.: 53.5×30.5×30.5 (LxWxH cm) , 21.65×11.8×12 (LxWxH inch) x Weight : 25Kg ( 55lbs ) Model iPS 3700-24 Inverter Nominal battery voltage 24V Input voltage range 19 – 34V Continuous power @ 25°C 2000W Power 30 min. @ 25°C 2800W Power 25 sec. @ 25°C 5.6kVA Maximum load Up to short-circuit Maximum asymmetric load Up to Continuous power Load detection (stand-by) 2 to 25 W Maximum efficiency 86 – 90% Consumption OFF/Stand-by/ON 3W / 9W / 70W Output voltage Sine wave 220Vac (+/- 2%) / 190-245Vac Dynamic behavior 5 ms (on load change 0 to 100%) Overload and short-circuit Automatic disconnection up to 10 times restart attempt Overheat protection Warning before shut – with automatic restart Battery charger 6 step adjustable : I-U-Uo-Equalize-Uo(low)-U(periodic) Charging current adjustable 0 – 45A Maximum input voltage 265Vac Input AC voltage range Adjustable threshold from 150 to 265Vac Battery control Absorption end By duration 2 / 0.25 – 10 h or by current – / 4 – 30A Absorption voltage** 28.8 / 19 – 34V Periodic absorption voltage** 19 – 34V Floating voltage** 27.2 / 19 – 34V Reduced floating voltage 19 – 34V Equalization** By number of cycles (1 – 100) or at set interval (52 weeks) Equalization end By duration 4 / 0.25 – 10 h or by current – / 4 – 30A Deep-discharge protection 21.6 / 19 – 34V Reduced floating time 0 – 32 days Periodic absorption time 0 – 10 hours General data iPS 3700-24 Auxiliary Output 2 independent Transistor short circuit protected outputs Auxiliary Input 2 Opto Coupler Programmable Input 10V Æ 60VDC Net Weight 25Kg ( 55lbs ) Weight with the cartoon box 26.2Kg (57.5lbs) 1 Year warranty
The Twist Online High Frequency UPS 1KVA TWUP1000/HF delivers stable backup power for servers, networking devices, and office equipment. It uses online double conversion technology for continuous clean power output. Additionally, the high-frequency design improves efficiency and reduces switching interruptions. Moreover, the UPS includes an LCD display for real-time monitoring and system status updates. It also features built-in 2x12V/9Ah batteries for backup operation during outages. Therefore, it protects connected devices from voltage fluctuations, surges, and power loss. Furthermore, the TWUP1000/HF supports pure sine wave output for sensitive electronic equipment. It also includes overload, short-circuit, and overheating protection for safer operation. Additionally, the compact tower design fits home, office, and IT environments easily. Specifications: 1KVA online double conversion UPS technology Built-in 2x12V/9Ah rechargeable batteries LCD display for system monitoring Pure sine wave output for stable power Overload and short-circuit protection system
The Invo Line Interactive UPS INLI Series is a power protection solution designed to provide backup power and voltage regulation for computers, networking equipment, and other electronic devices. It helps protect connected equipment from power interruptions, voltage fluctuations, and electrical disturbances. Therefore, it is suitable for home, office, and professional environments. The line interactive technology provides automatic voltage regulation to maintain stable power output while reducing the impact of unstable electricity. In addition, the series includes multiple capacity options from 750VA to 3000VA, allowing users to select a suitable model for their power requirements. As a result, it supports different setups ranging from personal computers to larger equipment. The system includes models with LED or LCD displays, built-in batteries, and external battery support depending on the selected capacity. Moreover, higher-capacity models provide extended backup options with additional battery configurations. Therefore, the INLI Series offers flexible solutions for different power backup needs. The workflow compatibility makes this UPS series suitable for protecting PCs, workstations, networking devices, and other sensitive electronics. In addition, the compact tower design and protection features help provide reliable operation during power events. Specifications: Capacity options: 750VA to 3000VA Technology: Line Interactive UPS with AVR Display options: LED or LCD depending on model Battery options: Built-in or external batteries Models available: INLI85, INLI100, INLI150, INLI200, INLI300 and more
PROLINK 2KVA AUTO VOLTAGE REGULATOR W/LCD PVR2000D PROLiNK PVR Series is designed to automatically maintain a constant voltage level to protect sensitive electronics from brownouts, under voltages and over voltages. The PROLiNK PVR takes efficiency to a new level with its microprocessor controller tailored to allow extremely fast response for detecting and regulating voltage. Equipped with a time-delay function, the PVR is able to protect connected devices from power-back surges.
APC Easy UPS On-Line SRV 10000VA 230V SRV10KI is a high-capacity online uninterruptible power supply designed for critical business infrastructure, servers, and data center environments. It provides continuous, clean, and stable power using true double-conversion technology. It delivers 10000VA / 10000W (approx.) power capacity for heavy-duty applications. Therefore, it can support multiple servers, networking equipment, and sensitive electronics during power failures or voltage fluctuations. In addition, it ensures uninterrupted operation for mission-critical systems. The UPS uses online double-conversion technology to fully isolate connected equipment from utility power disturbances. As a result, it provides consistent, regulated pure sine wave output at all times. It includes an LCD interface for real-time monitoring of system status, load, and battery conditions. Meanwhile, built-in protection features enhance system safety and operational reliability. APC designs the Easy UPS SRV series for enterprise-grade power protection. Therefore, this model is ideal for data centers, IT infrastructure, and critical business applications requiring maximum uptime. Manufacturer link Specifications: 10000VA high-capacity output Online double-conversion UPS system Pure sine wave power output LCD monitoring display Enterprise-grade power protection
APC 800VA BX800LI 415W UPS (IEC Plug) APC 650VA BX650LI UPS
Specifications : UPS Type Tower Phase Single phase with ground Rating (VA) 10000 Nominal Power (W) 8000 Standard ModelDimension (mm) 442 x 190 x 688 (D x W x H) Weight (kg) 66 Long-run ModelDimestions (mm) 442 x 190 x 318 (D x W x H) Weight (kg) 16 INPUT Connection Type Terminal Nominal Voltage 208/220/230/240VAC Voltage Range 110-300 VAC (Load at 50%)176-300 VAC (Load at 100%) Frequency Range 46~54 Hz or 56~64 Hz Power Factor >= 0.99 OUTPUT Connection Type Terminal Output Voltage 208/220/230/240VAC Voltage Regulation ±1% Frequency Range (Synchronized Range) 46~54 Hz or 56~64 Hz Frequency Range (Batt. Mode) 50Hz or 60Hz +/-0.1Hz Current Crest Ratio 3:1 Harmonic Distortion ≤3% THD (Linear load)≤5% THD (Non-linear load) ALARM & INDICATORS Battery Mode Sounding every 4 seconds Low Battery Sounding every second Overload Sounding twice every second Fault Continuously sounding LCD Load level, Battery Level, AC mode, Battery mode, Bypass mode and Fault CONNECTIVITY, CONTROL & MONITORING Front panel Status LED, Function keys, LCD display Communication Smart RS232*USB Port Emergency Power Off (EPO) BATTERY Standard ModelType 12V / 9Ah Numbers 16 Typical Recharge Time 9 hours recover to 90% capacity Long-run ModelType Depending on the capacity of external batteries Number 16 ~ 20 (Adjustable) Charging Current (max) 1A/2A/4A/6A (Adjustable, 6A is only available for 16pcs batteries) manufacturer link
The PROLINK Enerhome PRO2000 Line Interactive UPS is designed to provide reliable backup power and voltage protection for computers, networking equipment, and home electronics. It helps keep connected devices running during short power interruptions and unstable power conditions. The UPS provides a 2KVA capacity and uses Automatic Voltage Regulation (AVR) technology. Additionally, it helps correct voltage fluctuations and provides stable power output to improve equipment protection. The PROLINK PRO2000 features a line interactive design that allows quick switching to battery mode during power failures. Moreover, it provides efficient backup support for essential devices while reducing power-related risks. The UPS includes protection features against overload, short circuit, surge, and low battery conditions. Furthermore, these safety functions help protect connected equipment during different operating situations. The PROLINK Enerhome PRO2000 is suitable for homes, offices, and small workspaces that need dependable power backup. Therefore, it provides a practical solution for protecting computers, routers, and other important electronic devices. The compact design makes the UPS easy to install in different environments. In addition, its reliable performance helps users maintain stable operation during unexpected power interruptions. The PROLINK Enerhome PRO2000 2KVA Line Interactive UPS combines backup power, AVR voltage regulation, and protection features. As a result, it provides a reliable power solution for everyday electronic equipment. Specifications: Capacity: 2000VA / 1200W Technology: Line Interactive with AVR Protection: Overload, Short Circuit, Surge, Low Battery Protection Input Voltage: 220VAC Output Voltage: 220VAC
Onduleur tour Keor LP avec batterie avec 2 prises de courant 2P+T + 6 prises IEC 10A – 3000VA 2700W – port USB et RS232 1 YEAR WARRANTY
The Beco GP1200 1200VA 720W UPS delivers reliable power backup for home and office electronics. It keeps key devices running during outages. This helps prevent data loss and sudden shutdowns. Users gain peace of mind knowing devices stay protected. Moreover, the Beco GP1200 1200VA 720W UPS features 1200 VA capacity and 720 W output power for strong support. It handles computers, routers, modems, and monitors easily. Large systems stay powered long enough to save work. Performance stays stable and secure. In addition, the UPS includes built-in surge protection for reliable defense against voltage spikes. It guards appliances from unstable power conditions and electrical surges. This adds extra safety during storms or fluctuations. Protection stays consistent over time. Furthermore, the Beco GP1200 1200VA 720W UPS offers automatic voltage regulation without manual settings. It smooths voltage drops and spikes quickly. This helps connected devices run smoothly. Reliability increases in daily use. Also, the UPS provides battery backup when power fails. You can finish tasks and save important files before turning off systems. This reduces the risk of data corruption. Backup power feels dependable. In addition, the Beco GP1200 1200VA 720W UPS includes clear LED indicators for power and battery status. You can check performance at a glance. This helps monitor conditions with ease. Users stay informed during operation. Moreover, the UPS includes multiple output sockets for connecting more devices at once. This improves flexibility for busy workstations and entertainment setups. You can protect multiple electronics with one unit. Furthermore, the Beco GP1200 1200VA 720W UPS supports easy installation and quick setup. Users can connect devices without complicated steps. Setup remains simple for all users. Also, the compact design fits neatly on desks, shelves, or cabinets without taking much room. It blends well into home and office spaces. Portability stays practical. Overall, the Beco GP1200 1200VA 720W UPS delivers strong battery backup, surge protection, and smooth voltage regulation. It guards electronics and ensures uninterrupted use. This UPS is ideal for users seeking reliable, everyday power protection. Specifications: 1200VA, 720W, LED, Plastic Case Input: 140-290 VAC Output: 230VAC 50/60HZ 12V 7.5AH *2pcs, Universal Socket *4 + EU Plug With AVR, Bypass output Overload and short circuit protection
The APC UPS Online Easy SRV 800W / 1 KVA SRV1KI delivers continuous, reliable power for critical equipment. First, it provides pure sine wave output suitable for sensitive electronics. In addition, it protects devices from phttps://mojitech.net/shop/peripherals/ups-battery-backup/apc-smart-ups-rc-800w-1kva-sine-wave-lebanon/ower surges, spikes, and outages. Moreover, the UPS features a compact design for easy installation in offices or server rooms. Finally, the intuitive LCD interface allows real-time monitoring of battery status and load. The SRV1KI ensures uninterrupted operation and safeguards essential systems during power disruptions. Specifications: 800W / 1 KVA pure sine wave output for sensitive devices Protects against power surges, spikes, and outages Compact design suitable for offices and server rooms LCD interface for monitoring battery and load status Ensures uninterrupted operation during power disruptions
9E20Ki Eaton Online Double Conversion 9E 20KVA / 16000W Combo: 1:1 and 3:1, In-Built Automatic Relay Bypass, Intelligent Power Software, 1 USB port + 1 RS232 serial port (USB and RS232 ports cannot be used simultaneously), 1 slot for Network-MS, ModBus-MS or Relay-MS cards, 1 Year Warranty
APC UPS Accessories SMX48RMBP2U APC Smart-UPS X-Series 48V External Battery Pack Rack/Tower for SMX1000, SMX1500, SMX750
PCE MX Online 6KVA 5400W Internal Batteries Double Conversion Online- Pure Sine Wave
Original product name: UPS 5E1100iUSB Eaton Line Interactive UPS 1100VA / 660W, AVR, 6 IEC, USB port, software, Input / Output jacks included for Telephone / Modem / Internet Line surge protection | 2 Years Warranty 5E1100iUSB Eaton Line Interactive UPS 1100VA / 660W, AVR, 6 IEC, USB port, software, Input / Output jacks included for Telephone / Modem / Internet Line surge protection, 2 Years Warranty (Including Battery)
LiFePO4 BATTERY SYSTEM LPBF Series 48250-48300 48V 250ah Solar Panel Rechargeable Lithium Battery For Energy Storage System model LPBF48250 capacity 48V 12.5KWH Voltage 48V Rated Voltage 51.2V Charge Voltage 57.6V Discharge Voltage Range 48-57.6V MAX.Charge&Discharge Current 120A DOD 95% Modeles Connection 1-6 in parallel Ingress protection IP21 Cycle Life >6000, @25°C Working Temperature Range -10-50°C Net Weight(kg) 159KG Gross Weight(kg) 183KG Dimension(MM) 615*350*955MM 5 Years Warranty Specifications: LiFePO4 BATTERY SYSTEM LPBF Series 48250-48300 model LPBF48250 capacity 48V 12.5KWH Voltage 48V Rated Voltage 51.2V Charge Voltage 57.6V Discharge Voltage Range 48-57.6V 5 Years Warranty
The PCE Battery 12V 9Ah is a reliable and efficient power solution for various applications. Whether you need backup power for a UPS system or energy for your equipment, this battery ensures consistent performance. With a 12V output and 9Ah capacity, the PCE Battery delivers the power you need to keep your devices running smoothly. It’s ideal for use in security systems, emergency lighting, and other critical equipment. Designed for durability, the PCE Battery offers a long lifespan and requires minimal maintenance. Its sealed, lead-acid design ensures that it remains leak-proof and safe for use in different environments. The PCE Battery 12V 9Ah is compatible with a wide range of devices and systems. Whether you’re using it for home backup, industrial equipment, or a solar energy system, it provides dependable power when needed. This battery features advanced technology for efficient energy storage and reliable discharge. It also includes built-in safety features like overcharge and short-circuit protection, ensuring safe and stable operation. One of the key benefits of the PCE Battery is its easy installation. Whether you’re an expert or a beginner, this battery can be quickly installed and connected to your system with minimal effort. In conclusion, the PCE Battery 12V 9Ah is a perfect combination of reliability, performance, and safety. Choose this battery for a stable power supply and enjoy long-lasting energy for all your essential devices. Specifications: Voltage : 12V Capacity : 9Ah
INVO Online INH300 Centralized server center, mainframe, network control center, computing center Full Specifications : 3KVA 2100 W Half -Load 120 -300VAC, Full -Load 165V -300VAC 45.5Hz ~ 54.5Hz 220/230/240V ± 3% Waveform True Sine wave Frequency 50/60Hz ± 0.5 Distortion <3%(linear Load); <5%(Non -linear Load) Crest Factor 3:1 Efficiency 85% Overload Capacity 110%-150%:Switch to Bypass after 1min; >150%:Shutdown afte r 200ms Short Circuit UPS output turn off and alarm RS232 ;SNMP (Optional) LCD & LED Utility, Inverter, Bypass, Battery, Load ,Battery Mode ,Frequency , UPS Fault Indicator Audible Alarm -Battery Discharge Utility Failure, Beep/4s;Battery Low, Beep/1s UPS Abnornmal Continuous Beep and Red Led On Noise <55db (1Meter) Temperature 0°C~40°C Humidity 10%~90% Optional 19 inch Rack -mount Dimension (W * D * H) mm 357 x 144 x 215 439x190x341 514X262X455 (Long Time Mode) 514x262x710 (Standard Model) Specifications: Specifications : INVO Online UPS High Frequency 3000 VA, LCD Display Inbuilt Battery 6 x 12V/7Ah AC Input 2. Bypass 3. AC Output 4. Battery 5. Fault 6. Screen 9. LCD 1. AC Input 2. Bypass 3. AC Output 4. Battery 5. Fault 6. Screen 9. LCD 1 year warranty Manufacturer Link
Professional II Series (1P/1P) PROLiNK Professional II Series (1P/1P) is a single-phase UPS system using microprocessor controlled true online double conversion technology and it can be used to provide protection for critical loads especially on IT applications. High input power factor correction in the system improves efficiency and reduces overall losses.
UPS HAWK 2000VA 2kva 1 year warranty
UPS battery 12V 7A Battery for UPS 7A 12v
General Topology Online double conversion Configuration Tower Part Number 9E3000I Rating (VA/Watts) 3000/2400 Dimensions (H x W x D, mm) 399 x 330 x 190 Weight (kg) 24.2 Warranty 2 years Electrical Input Connection (1) IEC-320-C20 Input Voltage Range 176-300V without derating (up to 100-300V with derating) Nominal Voltage 208/220/230/240V Frequency 50/60 Hz autoselection Frequency Range 40-70 Hz Electrical Output Voltages 208V*/220V/230V/240V ±1% Voltage THD <2% for 100% linear load Outlets (6) IEC-320-C13 (1) IEC-320-C19 Overload Capacity 105%-130% : 60s, 130%-150% : 10s,>150% : ≥ 300ms Efficiency (Normal Mode) Up to 91% in Online mode Output Frequency 50/60 Hz autoselect Communications Communication Ports 1 USB port + 1 RS232 serial port (USB and RS232 ports cannot be used simultaneously) Communication Slot 1 slot for Network-M2, ModBus-MS or Relay-MS cards Power Management Software Intelligent Power Editions Environmental & Standards Audible Noise <37 dB @ typical load Operating Temperature 0 to 40°C Safety markings IEC/EN 62040-1 EMC Markings IEC/EN 62040 -2 Approvals CE, CB report (TUV)
Specifications : GENERAL UPS Type : Tower Phase : Single phase with ground Rating (VA) : 2000 Nominal Power (W) : 1600 Standard Model Dimension (mm) : 397x 145 x 220 (D x W x H) Weight (kg) : 17 Long-run Model Dimension (mm) : 397 x 145 x 220 (D x W x H) Weight (kg) : 6.8 INPUT Connection Type : IEC 320-C14 Nominal Voltage : 200/208/220/230/240 VAC Voltage Range : 110-300 VAC (Load at 50%) 160-280 VAC (Load at 100%) Frequency Range : 45 ~ 70 Hz Power Factor : >= 0.99 OUTPUT Connection Type : 3 x Universal socket (PRO902WS) 2 x Universal socket (PRO902WL) Nominal Voltage : 200/208/220/230/240 VAC Voltage Regulation : ±1% Frequency Range (Synchronized Range) : 47 ~ 53 Hz or 57 ~ 63 Hz Frequency Range (Batt. Mode) : 50 Hz ± 0.25 Hz or 60 Hz ± 0.3 Hz Current Crest Ratio : 3:1 Harmonic Distortion ; ≤3% THD (Linear load) ≤6% THD (Non-linear load) ALARM & INDICATORS Battery Mode : Sounding every 4 seconds Low Battery : Sounding every second Overload : Sounding twice every second Fault : Continuously sounding LCD : Load level, Battery Level, AC mode, Battery mode, Bypass mode and Fault CONNECTIVITY, CONTROL & MONITORING Front panel : Status LED, Function keys, LCD display Communication : Smart RS232* USB : Port BATTERY Standard Model Type : 12V / 9Ah Numbers : 4 Typical Recharge Time : 4 hours recover to 90% capacity Long-run Model Type : Depending on the capacity of external batteries Number : 4/6/8 Charging Current (max) : 1A / 2A / 4A / 6A Adjustable REAR PANEL 1. AC Input 2. Input circuit breaker 3. USB Communication port 4. RS-232 communication port 5. Intelligent slot 6. External battery connection (Only available for L model) 7. Output receptacles
