The Twist Online High Frequency UPS 6KVA TWUP6000/HF provides continuous backup power for servers, networking systems, and critical equipment. It uses online double conversion technology for stable and clean power delivery. Additionally, the high-frequency design improves efficiency and reduces transfer interruptions. Moreover, the UPS includes an LCD display for real-time monitoring and system alerts. It features internal 16x12V/9Ah batteries for backup operation during outages. Therefore, it protects connected devices from voltage fluctuations, overloads, and sudden power loss. Furthermore, the TWUP6000/HF supports pure sine wave output for sensitive electronic equipment. It also includes overload, short-circuit, and overheating protection for safer operation. Additionally, the tower design fits office, server room, and IT environments easily. Specifications: 6KVA online double conversion UPS technology Internal 16x12V/9Ah rechargeable batteries LCD display for real-time monitoring Pure sine wave output for stable power delivery Overload and short-circuit protection system
PCE CASA 1KVA inverter is a compact off-grid power solution designed for home and small office backup use. It helps keep essential devices running during power cuts, such as routers, lights, and small electronics. In addition, it provides pure sine wave output. Therefore, it delivers clean and stable power for sensitive devices. Moreover, it supports AC mains and generator input, which makes it flexible in different power conditions. Furthermore, PCE CASA 1KVA inverter includes smart battery charging control. As a result, it improves charging efficiency and helps extend battery life. It also supports automatic restart after power recovery, ensuring continuous operation. In addition, it includes built-in protection features. Therefore, it helps protect against overload, short circuit, and overheating. Moreover, it supports a cold start function for direct battery operation when no grid power is available. Overall, PCE CASA 1KVA inverter delivers reliable backup performance, stable output, and essential protection for everyday home and office energy needs. Specifications: 1KVA capacity for home and small office loads Pure sine wave output for stable device operation AC mains and generator input support Smart battery charging control for efficiency Built-in protection against overload and short circuit
9E20Ki Eaton Online Double Conversion 9E 20KVA / 16000W Combo: 1:1 and 3:1, In-Built Automatic Relay Bypass, Intelligent Power Software, 1 USB port + 1 RS232 serial port (USB and RS232 ports cannot be used simultaneously), 1 slot for Network-MS, ModBus-MS or Relay-MS cards, 1 Year Warranty
APC 800VA BX800LI 415W UPS (IEC Plug) APC 650VA BX650LI UPS
UPS ONLINE 2KVA 1600W PURE SINEWAVE 1 YEAR WARRANTY
APC Easy UPS 800VA 230V Line Interactive UPS is a reliable power backup solution designed to protect home and office electronics from power outages, voltage fluctuations, and surges. It ensures stable and continuous operation for essential devices during unstable electricity conditions. It provides 800VA / 450W power capacity with line-interactive technology. Therefore, it automatically regulates voltage through AVR (Automatic Voltage Regulation) without switching to battery mode frequently. In addition, it helps extend battery life and maintain stable power output. The UPS includes an LED status display for clear monitoring of system and power conditions. As a result, users can easily check operational status, battery level, and load conditions at a glance. It features universal receptacles for flexible device compatibility. Meanwhile, its compact design and 5.3 kg weight make it easy to install in home or office environments. APC designs the Easy UPS series for dependable and efficient power protection. Therefore, this model is ideal for PCs, networking equipment, routers, and other essential electronics. Specifications: 800VA / 450W power capacity Line-interactive AVR technology LED status monitoring display Universal output receptacles Reliable backup for PCs and electronics
APC UPS Accessories SRVRK1 APC Easy UPS RAIL KIT, 700MM, 1 – 10KVA (Rackable SRV models)
Specifications : Professional II Series (1P/1P) Tower is specifically designed for operation in poor power areas. They provides high power density with long backup time in compact size. It’s ideal for ATMs, banking and other business critical applications. – True double-conversion – Microprocessor control optimizes reliability – Output power factor 0.8 – Wide input voltage (110 V – 300 V) – Converter mode available – ECO mode for energy saving – Generator compatible – Smart SNMP works well with either USB or RS-232 together – Comprehensive display allows easy monitoring and access of UPS status – Input power factor correction manufacturer link
Max Configurable Power (Watts) 6.0kWatts / 6.0kVA Efficiency at Full Load 94.0 % Output Frequency (sync to mains) 50/60 Hz +/- 3 Hz Sync to mains Other Output Voltages 220 V, 240 V Load Crest Factor 3 : 1 Topology Double conversion online Waveform type Sine wave Bypass Internal bypass (automatic and manual) Input Input frequency 40 – 70 Hz Input voltage range for main operations 110 – 300 Adjustable (half load), 176 – 300V Efficiency at Full Load 94.0 % Other Input Voltages 220 V, 240 V Batteries & Runtime Battery type Lead-acid battery Typical recharge time 3hour(s) Battery Charge Power (Watts) 373 Watts Runtime View Runtime Graph View Runtime Chart Communications & Management Interface Port(s) DB-9 RS-232, Intelligent Smart Slot, USB Control panel Multifunction LCD status and control console Audible Alarm Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm Emergency Power Off (EPO) Yes Available SmartSlot™ Interface Quantity 1 Surge Protection and Filtering Surge energy rating 600Joules Physical Maximum Height 685MM, 68.5CM Maximum Width 190MM, 19.0CM Maximum Depth 374MM, 37.4CM Net Weight 54.0KG Shipping weight 66.0KG Shipping Height 910MM, 91.0CM Shipping Width 290MM, 29.0CM Shipping Depth 495MM, 49.5CM Color Black Environmental Operating Temperature 0 – 40 °C Operating Relative Humidity 0 – 95 (Non-condensing) % Operating Elevation 0 – 3000meters Storage Temperature -15 – 60 °C Storage Relative Humidity 0 – 95 (Non-condensing) % Storage Elevation 0 – 15000meters Audible noise at 1 meter from surface of unit 55.0dBA Protection Class IP20 1 YEAR WARRANTY
Description : The Professional Series (1P/1P) – Tower is an advanced, affordable on-line double-conversion technology single-phase UPS system. Tower versions are available with 1000VA to 10000VA models and these offer high reliability for workstations, server and network equipment. The Professional Series is designed with automatic voltage regulation (AVR) to protect against power outages, disturbances and spikes. High voltage battery chargers and battery extension assembly is available for the long run time application. Key Features and Benefits True Double-Conversion Online UPS Mircoprocessor control optimizes reliability Input power factor correction Output Power Factor 0.80. Wide input voltage (110V – 300V) Converter mode available ECO mode for enegry saving (Only available for 1 – 3 KVA) Generator compatible Adjustable battery number only available for 6K and up models Smart SNMP works well with either USB or RS-232 together Emergency power off function (EPO) only available for 6K / 10K models Optional isolation transformer available. 02 Years Warranty manufacturer link
The Twist Online High Frequency UPS 1KVA TWUP1000/HF delivers stable backup power for servers, networking devices, and office equipment. It uses online double conversion technology for continuous clean power output. Additionally, the high-frequency design improves efficiency and reduces switching interruptions. Moreover, the UPS includes an LCD display for real-time monitoring and system status updates. It also features built-in 2x12V/9Ah batteries for backup operation during outages. Therefore, it protects connected devices from voltage fluctuations, surges, and power loss. Furthermore, the TWUP1000/HF supports pure sine wave output for sensitive electronic equipment. It also includes overload, short-circuit, and overheating protection for safer operation. Additionally, the compact tower design fits home, office, and IT environments easily. Specifications: 1KVA online double conversion UPS technology Built-in 2x12V/9Ah rechargeable batteries LCD display for system monitoring Pure sine wave output for stable power Overload and short-circuit protection system
Specifications : Output Max Configurable Power (Watts) 6.0kWatts / 6.0kVA Output Voltage Note Configurable for 220 : 230 or 240 nominal output voltage Efficiency at Full Load 94.0 % Output Voltage Distortion 1 % Output Frequency (sync to mains) 50/60 Hz +/- 3 Hz Sync to mains Other Output Voltages 220 V, 240 V Load Crest Factor 3 : 1 Topology Double conversion online Waveform type Sine wave Bypass Internal bypass (automatic and manual) Input Input frequency 40 – 70 Hz Auto sensing Input voltage range for main operations 110 – 300 Half load, 176 – 300 Full loadV Efficiency at Full Load 94.0 % Other Input Voltages 220 V, 240 V Batteries & Runtime Battery type Lead-acid battery Typical recharge time 7hour(s) Nominal Battery Voltage 192 V Expected Battery Life (years) 3 – 5 Battery Charge Power (Watts) 235 Watts Runtime View Runtime Graph Communications & Management Interface Port(s) DB-9 RS-232, USB Control panel Multifunction LCD status and control console Audible Alarm Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm Emergency Power Off (EPO) Yes Available SmartSlot™ Interface Quantity 1 Surge Protection and Filtering Surge energy rating 600Joules Physical Maximum Height 173MM, 17.3CM Maximum Width 438MM, 43.8CM Maximum Depth 710MM, 71.0CM Net Weight 61.0KG Shipping weight 71.0KG Shipping Height 1232MM, 123.19CM Shipping Width 600MM, 60.0CM Shipping Depth 836MM, 83.6CM Color Black Environmental Operating Temperature 0 – 40 °C Operating Relative Humidity 0 – 95 % Operating Elevation 0 – 3000meters Storage Temperature -15 – 60 °C Storage Relative Humidity 0 – 95 (Non-condensing) % Storage Elevation 0 – 15000meters Audible noise at 1 meter from surface of unit 55.0dBA Online thermal dissipation 1172.0BTU/hr Protection Class IP20 Conformance Approvals CE, EAC, EN/IEC 62040-1, EN/IEC 62040-2, TISI Standard warranty 2 years repair or replace Sustainable Offer Status RoHS Compliant Warranty : 1 year https://www.apc.com/shop/dk/en/products/APC-Easy-UPS-On-Line-SRV-6000VA-RM-230V-with-Rail-Kit/P-SRV6KRIRK
The Prolink Online UPS 10KVA with LCD and Internal Battery is designed to provide stable power protection for servers, networking equipment, and critical electronic systems. It helps maintain continuous operation during power failures and protects devices from unstable power conditions. The UPS provides a 10KVA capacity and uses online double conversion technology. Additionally, it delivers clean and stable power output to support sensitive equipment that requires reliable energy performance. The Prolink Online UPS features an LCD display that allows users to monitor important system information. Moreover, the screen shows details such as input voltage, output voltage, battery status, load level, and operating conditions for easier management. The UPS includes an internal battery system that provides backup power during outages. Furthermore, it supports protection features against overload, short circuit, over-temperature, and battery problems to help protect connected devices. The Prolink Online UPS is suitable for offices, data centers, and professional environments that need continuous power support. Therefore, it provides a practical backup solution for important equipment that requires stable electricity. The UPS combines high capacity, online power protection, battery backup, and monitoring features in one system. As a result, it helps users maintain reliable power performance during unexpected interruptions. Specifications: Capacity: 10KVA UPS Type: Online Double Conversion Display: LCD Display Battery: Internal Battery System Protection: Overload, Short Circuit, Over Temperature Protection
Specifications : GENERAL UPS Type : Tower Phase : Single phase with ground Rating (VA) : 2000 Nominal Power (W) : 1600 Standard Model Dimension (mm) : 397x 145 x 220 (D x W x H) Weight (kg) : 17 Long-run Model Dimension (mm) : 397 x 145 x 220 (D x W x H) Weight (kg) : 6.8 INPUT Connection Type : IEC 320-C14 Nominal Voltage : 200/208/220/230/240 VAC Voltage Range : 110-300 VAC (Load at 50%) 160-280 VAC (Load at 100%) Frequency Range : 45 ~ 70 Hz Power Factor : >= 0.99 OUTPUT Connection Type : 3 x Universal socket (PRO902WS) 2 x Universal socket (PRO902WL) Nominal Voltage : 200/208/220/230/240 VAC Voltage Regulation : ±1% Frequency Range (Synchronized Range) : 47 ~ 53 Hz or 57 ~ 63 Hz Frequency Range (Batt. Mode) : 50 Hz ± 0.25 Hz or 60 Hz ± 0.3 Hz Current Crest Ratio : 3:1 Harmonic Distortion ; ≤3% THD (Linear load) ≤6% THD (Non-linear load) ALARM & INDICATORS Battery Mode : Sounding every 4 seconds Low Battery : Sounding every second Overload : Sounding twice every second Fault : Continuously sounding LCD : Load level, Battery Level, AC mode, Battery mode, Bypass mode and Fault CONNECTIVITY, CONTROL & MONITORING Front panel : Status LED, Function keys, LCD display Communication : Smart RS232* USB : Port BATTERY Standard Model Type : 12V / 9Ah Numbers : 4 Typical Recharge Time : 4 hours recover to 90% capacity Long-run Model Type : Depending on the capacity of external batteries Number : 4/6/8 Charging Current (max) : 1A / 2A / 4A / 6A Adjustable REAR PANEL 1. AC Input 2. Input circuit breaker 3. USB Communication port 4. RS-232 communication port 5. Intelligent slot 6. External battery connection (Only available for L model) 7. Output receptacles
Original product name: UPS 5E650IUSBDIN Eaton Line Interactive UPS 650VA / 360W, AVR, 1 Schuko (DIN) + 2 IEC, USB port, software, Input / Output jacks included for Telephone / Modem / Internet Line surge protection, 2 Years Warranty (Including Battery) 5E650IUSBDIN Eaton Line Interactive UPS 650VA / 360W, AVR, 1 Schuko (DIN) + 2 IEC, USB port, software, Input / Output jacks included for Telephone / Modem / Internet Line surge protection 2 Years Warranty (Including Battery)
The Twist Online High Frequency UPS 3KVA TWUP3000/HF delivers reliable backup power for servers, networking systems, and professional equipment. It uses online double conversion technology for continuous clean power output. Additionally, the high-frequency design improves efficiency and reduces power interruption risks. Moreover, the UPS includes an LCD display for real-time system monitoring and status alerts. It features internal 6x12V/9Ah batteries for backup operation during outages. Therefore, it helps protect sensitive devices from voltage fluctuations and sudden power loss. Furthermore, the TWUP3000/HF supports pure sine wave output for stable performance with critical equipment. It also includes overload, short-circuit, and overheating protection for safer operation. Additionally, the compact tower design fits office, server room, and IT environments easily. Specifications: 3KVA online double conversion UPS technology Internal 6x12V/9Ah rechargeable batteries LCD display for real-time monitoring Pure sine wave output for stable power delivery Overload and short-circuit protection system
Prolink PRO3000SFCU 3000VA is a line-interactive UPS designed to provide stable backup power for PCs, servers, networking devices, and sensitive electronics. It ensures continuous operation during power cuts and voltage fluctuations. In addition, Prolink PRO3000SFCU 3000VA supports a wide input voltage range of 140–300VAC. Therefore, it stabilizes unstable electricity using automatic voltage regulation (AVR). Moreover, it delivers a fast transfer time of around 2ms for seamless switching between mains and battery mode. Furthermore, Prolink PRO3000SFCU 3000VA includes four 12V/10Ah batteries for extended backup support. As a result, it provides reliable runtime for critical systems depending on load. It also supports simulated sine wave output for compatible devices. In addition, Prolink PRO3000SFCU 3000VA features intelligent microprocessor control. Therefore, it improves efficiency, protection, and battery management. Moreover, it includes indicators and alarms for battery, overload, and fault conditions. Overall, Prolink PRO3000SFCU 3000VA delivers strong backup performance, stable voltage regulation, and reliable protection for home and office power needs. Specifications: 3000VA capacity for PCs and office equipment Line-interactive UPS with AVR voltage regulation Wide input range 140–300VAC for unstable power Fast ~2ms transfer time for uninterrupted switching Four 12V/10Ah batteries for extended backup support
Presentation High quality, Double-conversion On-line UPS designed for essential power protection needs even in the most unstable power conditions. Lead time Usually in Stock General provided equipment Basic UPS signalling RS-232 cable CD with software Rack mounting brackets User manual USB cable Number of tare power 25 W Number of power module free slots 0 Number of power module filled slots 0 redundant No UPS size WS Physical number of rack unit 5U colour Black depth 61.5 cm height 21.95 cm net weight 78 kg USB compatible Yes width 43.8 cm Input network frequency 40…70 Hz number of input connectors 1 hard wire 3-wire (1P + N + E) input voltage limits 110…300 V adjustable (half load) 176…300 V inputvolt_other 220 V 240 V input voltage 230 V Output rated power in W 6000 W Maximum configurable power in W 6000 W output frequency 50/60 Hz +/- 3 Hz sync to mains outputvolt_other 220 V 240 V crest factor 3 : 1 UPS type Double conversion online Wave type Sine wave output connector type Hard wire 3-wire (H N + E) 1 bypass type Internal bypass (automatic and manual) curve equation Efficiency curve load maximum 100 % curve X-axis maximum 100 % curve X-axis minimum 0 % curve X-axis title Load curve X-axis units Percentage curve Y-axis maximum 100 % curve Y-axis minimum 50 % curve Y-axis title Efficiency curve Y-axis units Percentage efficiency 94 % (full load) graph display 1 half load runtime 00:10:00 3000 W output voltage 230 V Maximum configurable power in VA 6000 VA rated power in VA 6000 VA Conformance product certifications CE standards IEC 62040-1-1 IEC 62040-1-2 Environmental ambient air temperature for operation 0…40 °C relative humidity 0…95 % non-condensing operating altitude 0…3000 m ambient air temperature for storage -15…60 °C Storage Relative Humidity Non-condensing 0…95 % storage altitude 0…15000 m acoustic level 55 dB show note OP temperature No IP degree of protection IP20 Batteries & Runtime battery type Lead-acid battery number of battery filled slots 0 number of battery free slots 0 Battery recharge time 3 h additional information Configurable for 220 : 230 or 240 nominal output voltage liquid value 0 battery curve D Battery power in VAH 1512 VAh runtime battery option SRV240RLBP-9A 1 3024 VAh SRV240RLBP-9A 2 4536 VAh SRV240RLBP-9A 3 6048 VAh SRV240RLBP-9A 4 7560 VAh SRV240RLBP-9A Communications & Management free slots 1 control panel Multifunction LCD status and control console alarm Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm Emergency power off Yes manufacturer link 1 YEAR WARRANTY
The APC Easy UPS 1200W / 2200VA BX2200MI-MS provides reliable backup power for critical devices. First, it delivers line-interactive output to protect equipment from voltage fluctuations. In addition, it safeguards connected electronics against surges, spikes, and short outages. Moreover, the UPS features a compact design for easy installation in offices or home setups. Finally, the LCD panel allows real-time monitoring of battery and load status. The BX2200MI-MS ensures uninterrupted operation and protects essential systems during power interruptions. manufacturer link Specifications: 1200W / 2200VA line-interactive output for reliable device protection Protects electronics from surges, spikes, and outages Compact design suitable for office or home setups LCD panel for monitoring battery and load status Ensures uninterrupted operation during power interruptions
MGE Eaton 5E Essential Plus 5E2000iUSB 2000VA UPS w/ Power Management USB Port
The Beco GP600 600VA 360W UPS delivers reliable power protection for home and office devices. It keeps your electronics safe during outages and voltage drops. This UPS helps prevent data loss and sudden shutdowns, providing peace of mind every day. Moreover, the Beco GP600 600VA 360W UPS features 600 VA capacity with up to 360 W output power. It supports computers, routers, modems, and monitors effortlessly. Devices continue running smoothly during short power interruptions. This improves system stability. In addition, the UPS includes built-in surge protection for safe operation. It guards connected devices against spikes and surges. This adds an extra layer of defense during storms or unstable power conditions. Safety remains a priority. Furthermore, the Beco GP600 600VA 360W UPS offers battery backup that keeps equipment running long enough to save work. This prevents data corruption during sudden outages. Users can shut down systems properly. Protection feels dependable. Also, the unit delivers stable voltage regulation without manual adjustment. It corrects fluctuations automatically. This improves device performance and lifespan. Steady power enhances everyday use. In addition, the Beco GP600 600VA 360W UPS includes easy-to-read LED indicators. They show power and battery status at a glance. Users stay informed without confusion. Monitoring becomes simple and quick. Moreover, the UPS features multiple outlets for connecting several devices at once. This increases flexibility for workstations and entertainment setups. You can protect more devices with one unit. Furthermore, the Beco GP600 600VA 360W UPS supports simple installation without complicated steps. Setup is quick with clearly marked connections. This helps both beginners and experienced users. Also, the compact design fits well on desks or shelves without taking much space. It blends into home and office environments easily. Portability stays practical. Overall, the Beco GP600 600VA 360W UPS delivers dependable battery backup, surge protection, and steady power. It protects vital electronics and supports uninterrupted use. This UPS is ideal for users seeking reliable power protection every day. Specifications: 600VA, 360W, LED, Plastic Case Input: 145-290 VAC Output: 230VAC 50/60HZ 12V 7AH *1pc, Universal Socket *2 + EU Plug With AVR, Bypass output Overload and short circuit protection
PCE VX Online 1 KVA 800W Internal Batteries Double Conversion Online- Pure Sine Wave Model VX 1K Input Rating Voltage Frequency Voltage range Power Factor THDi 1000VA 220V, 230V, 240V, 1Ø 2Wires 40~70Hz 176-300 VAC at 100% load, 110-300 VAC at 50% load >99% <5% Ouput Active Power @ PF=0.9 Voltage (on battery) Frequency (on battery) Transfer Time Efficiency UPS Design Technology Output Wave Form Total Harmonic distortion (THD) Crest Factor 900W 220V, 230V, 240V, +/-1% (selectable output voltage), 1Ø 2Wires 50/60 Hz +/-0.2% 0 ms 93% Online double conversion design Pure Sinewave ≤3% (linear load), ≤5% (non linear load) 3:1 Protection Overload Protection Short Circuit Protection 110% for 10min, 130% for 1min, >130% for 3sec UPS output cuts off immediately using input fuse/circuit breaker protection System Display LCD indicators Load level, Battery level, AC mode, Battery mode, Bypass mode, and Fault indicators Alarm Battery mode Low battery Overload Fault Sounding every 4 second Sounding every second Sounding twice every second Continuously sounding Battery Battery Type Typical Recharge Time DC Voltage Charging Current Back up time(1/2 Load) 12V 9Ah 4 hours to 90% Full capacity 24VDC 1A 10~15 min depending on load Communication USB or RS-232 SNMP* Compatibility Interface with power management software Power Management from SNMP manager and web browser Supports Windows family, Linux, Unix and Mac Physical W x D x H mm Net Weight Kgs(lbs) 145x282x220mm 9.8Kg(21.6lb) Environment Operating Temperature Storage Temperature Altitude Audible noise Relative Humidity 0 – 40 °C / 32 ~ 104°F -20 ~ 50°C / -4 ~ 122°F 1,500 meters max <50dBA at 1 Meter 20 to 90% humidity (non-condensing) Standards & Certifications Performance Safety EMC (EMS / EMI) Design, production, & services Environment Marking & Certifications EN50091-3/IEC 62040-3 UL 1778, CE, EN 50091-1,EN 60950 (RD/), IEC 60950 IEC 61000-4-2/-3/-4/-5/-6/-8/-11, IEC 61000-3-2/-3,FCC Part 15, CISPR 22, EN 50091-2/IEC62040-2 Class A, EN 55022/B,FCC 47 part 15 – Subpart B – ISO 9001 ISO 14001 certified company CE, TUV/GS, UL, cUL, c-Tick
Specifications : Brand HAWK Package Dimensions 59.2 x 54.5 x 19.8 cm; 9 Kilograms Item model number HAWK202011 Manufacturer HAWK Wattage 720 watts Are Batteries Included Yes Item Weight 9 kg
The APC 1600VA BX1600MI 900W UPS provides reliable backup power for home and office electronics. First, it delivers line-interactive output to protect devices from voltage fluctuations. In addition, it safeguards connected equipment from surges, spikes, and short outages. Moreover, the compact design allows easy placement near computers or servers. Finally, the LCD indicators display battery and load status for real-time monitoring. The BX1600MI-GR ensures uninterrupted operation and reliable protection for critical devices. manufacturer link Specifications: 900W / 1600VA line-interactive output for reliable device protection Protects electronics from power surges, spikes, and outages Compact design for easy placement near computers or servers LCD indicators for monitoring battery and load status Ensures uninterrupted operation during power interruptions
UPS HAWK 2000VA 2kva 1 year warranty
