INVO online INH1000 NVO Online UPS High Frequency 10000 VA, LCD Display Inbuilt Battery 16 x 12V/9 Ah Specifications: Specifications : AC Input Bypass AC Output Battery Fault Screen LCD AC Input Bypass AC Output Battery Fault Screen LCD 1 year warranty Manufacturer Link
Onduleur tour Keor LP avec batterie avec 2 prises de courant 2P+T + 6 prises IEC 10A – 3000VA 2700W – port USB et RS232 1 YEAR WARRANTY
INVO Online INH600 INVO Online UPS High Frequency 6000 VA, LCD Display Inbuilt Battery 16 x 12V/7Ah online ups system high frequency and high load management. Full Specifications : AC Input Bypass AC Output Battery Fault Screen LCD AC Input Bypass AC Output Battery Fault Screen LCD 6 KVA/4200W Half -Load 120 -300VAC, Full -Load 165V -300VAC 176V`~276VAC Frequency 45.5Hz ~ 54.5Hz Power Factor 0.95 Output Voltage 220/230/240V ± 3% Waveform True Sine wave Frequency 50/60Hz ± 0.5 Distortion <3%(linear Load); <5%(Non -linear Load) Crest Factor 3:1 Efficiency 85% Overload Capacity 110%-150%:Switch to Bypass after 1min; >150%:Shutdown afte r 200ms Short Circuit UPS output turn off and alarm Battery Model 12V Sealed Lead -Acid Voltage 36DC 96DC 240C Configuration Recharge 90% Capacity after 8 Hours charging RS232 ;SNMP (Optional) LCD & LED Utility, Inverter, Bypass, Battery, Load ,Battery Mode ,Frequency , UPS Fault Indicator Audible Alarm -Battery Discharge Utility Failure, Beep/4s;Battery Low, Beep/1s UPS Abnornmal Continuous Beep and Red Led On Noise <55db (1Meter) Temperature 0°C~40°C Humidity 10%~90% Optional 19 inch Rack -mount Dimension (W * D * H) mm 357 x 144 x 215 439x190x341 514X262X455 (Long Time Mode) 514x262x710 (Standard Model) Specifications: Specifications : AC Input Bypass AC Output Battery Fault Screen LCD AC Input Bypass AC Output Battery Fault Screen LCD 1 year warranty Manufacturer Link
The Prolink Online UPS 10KVA with LCD and Internal Battery is designed to provide stable power protection for servers, networking equipment, and critical electronic systems. It helps maintain continuous operation during power failures and protects devices from unstable power conditions. The UPS provides a 10KVA capacity and uses online double conversion technology. Additionally, it delivers clean and stable power output to support sensitive equipment that requires reliable energy performance. The Prolink Online UPS features an LCD display that allows users to monitor important system information. Moreover, the screen shows details such as input voltage, output voltage, battery status, load level, and operating conditions for easier management. The UPS includes an internal battery system that provides backup power during outages. Furthermore, it supports protection features against overload, short circuit, over-temperature, and battery problems to help protect connected devices. The Prolink Online UPS is suitable for offices, data centers, and professional environments that need continuous power support. Therefore, it provides a practical backup solution for important equipment that requires stable electricity. The UPS combines high capacity, online power protection, battery backup, and monitoring features in one system. As a result, it helps users maintain reliable power performance during unexpected interruptions. Specifications: Capacity: 10KVA UPS Type: Online Double Conversion Display: LCD Display Battery: Internal Battery System Protection: Overload, Short Circuit, Over Temperature Protection
The ProLink PRO851SFCU Super Fast Charging UPS is designed to provide reliable backup power and voltage protection for computers, networking equipment, and home electronics. It helps keep essential devices operating during short power interruptions and unstable electrical conditions. The UPS provides an 850VA capacity and features line interactive technology with Automatic Voltage Regulation (AVR). Additionally, AVR helps stabilize voltage fluctuations and protects connected devices from overvoltage and undervoltage conditions. The ProLink PRO851SFCU features super-fast charging technology that significantly reduces battery recharge time after power outages. Moreover, this feature helps ensure the UPS is ready for future interruptions more quickly. The UPS includes multiple protection functions against overload, short circuit, surge, and battery discharge conditions. Furthermore, these protection features help improve the safety and reliability of connected equipment. The PRO851SFCU includes LED status indicators that allow users to monitor operating conditions easily. Therefore, users can quickly check power status, battery mode, and system operation. The compact design makes the UPS suitable for homes, offices, and small workspaces. In addition, it provides dependable backup support for desktop computers, routers, CCTV systems, and other important electronic devices. The ProLink PRO851SFCU Super Fast Charging UPS combines backup power, fast battery charging, AVR technology, and safety features. As a result, it provides a practical and reliable power protection solution for everyday use. Specifications: Capacity : 850VA Input : 230VAC Output : 230VAC Input Voltage : 510W Transfer Time : 2ms Battery Type : 12V/10Ah x1 Backup Time : 10-30 Min Part Number : PRO851SCFU
The INVO INSR Stabilizer offers automatic voltage regulation for homes and offices. It supports single-phase input from 1000 VA to 5000 VA, covering multiple needs . Moreover, it features a clear LCD that shows input and output voltages. This stabilizer uses a sturdy metal cabinet to protect internal parts. Also, it adds a three-second power delay to protect connected devices . Therefore, your appliances start safely after power returns. It comes in models such as INSR1000, 1500, 2000, 3000, and 5000 VA. This range suits small PCs to mid-sized equipment and appliances . Additionally, installation is easy via wall mount or tabletop placement. Built-in protections include overvoltage, undervoltage, and overload safety. This helps prevent damage during electrical fluctuations. It also resists heat and short circuit events. Thus, it keeps both electronics and home safe. Thanks to its servo-controlled design, it delivers steady output within ±3%. Hence, your sensitive devices run smoothly and securely. It also operates quietly, ideal for offices and study rooms. Plus, it’s energy efficient and requires minimal maintenance. Furthermore, its LCD display and simple controls make setup fast. The stabilizer supports various uses like PCs, printers, routers, TVs, and appliances. In short, the INVO INSR Stabilizer combines solid performance, safety, and ease. Choose this device when you need dependable voltage control at home or office. Specifications: INSR300 INVO Automatic Voltage Regulator 3000VA, LCD Display ,Single Phase, Metal Cabinet, Delay 3 secs INSR200 INVO Automatic Voltage Regulator 2000VA, LCD Display ,Single Phase, Metal Cabinet, Delay 3 secs INSR150 INVO Automatic Voltage Regulator 1500VA, LCD Display ,Single Phase, Metal Cabinet, Delay 3 secs INSR100 INVO Automatic Voltage Regulator 1000VA, LCD Display ,Single Phase, Metal Cabinet, Delay 3 secs INSR50 INVO Automatic Voltage Regulator 1000VA, LCD Display ,Single Phase, Metal Cabinet, Delay 3 secs
APC UPS Accessories SMX48RMBP2U APC Smart-UPS X-Series 48V External Battery Pack Rack/Tower for SMX1000, SMX1500, SMX750
The SkyGate Mini DC UPS 20000mAh is a powerful and compact solution for uninterrupted power. Whether you need backup power for your router, modem, or other devices, this mini UPS has you covered. With a 20000mAh capacity, the SkyGate Mini DC UPS ensures your devices stay powered during outages or unexpected power cuts. This high-capacity battery provides extended usage time, keeping your essentials running smoothly. The SkyGate Mini DC UPS is designed for versatility, featuring multiple output options. It supports DC 9V/12V, USB 5V, and Type C, making it compatible with a wide range of devices, from routers to smartphones. Setting up the SkyGate Mini DC UPS is simple and hassle-free. Its plug-and-play functionality allows you to connect your devices quickly, ensuring uninterrupted power with minimal effort. The SkyGate Mini DC UPS is equipped with intelligent safety features, including overcharge protection, over-discharge protection, and short-circuit protection. These features ensure safe and reliable operation, protecting your devices from damage. Compact and portable, the SkyGate Mini DC UPS is easy to carry and store. Its lightweight design makes it perfect for use at home, in the office, or even on the go. In conclusion, the SkyGate Mini DC UPS 20000mAh offers reliable backup power with a high-capacity battery and versatile output options. Keep your devices running smoothly during power outages with this efficient and portable mini UPS. Specifications: Battery : 20000mAh Output Power : 18W POE Port : 24V/0.7A DC Port : 9V/2A, 12V/1.5A Output Ports : 5V/2A USB, 5V/1A Type-C
The Prosonic 2000mAh MINI DC UPS | GS-1018 provides stable backup power for routers, modems, CCTV cameras, ONU devices, and other low-power networking equipment during electricity outages. Its compact design fits easily beside networking devices while maintaining reliable operation for home and office setups. This mini UPS supports multiple DC output options, making it suitable for different electronic devices that require continuous power. The built-in safety protections help prevent overheating, overload, overcharging, and short circuits, which improves long-term reliability and device safety. In addition, the lightweight body allows easy placement in small spaces without adding clutter to your setup. The unit delivers dependable backup support for internet connectivity during load shedding or sudden power interruptions. Users can connect routers and communication equipment directly to maintain stable online access for work, streaming, online classes, or security monitoring systems. Key operating features include efficient power conversion, portable dimensions, and compatibility with common DC-powered devices. The Prosonic GS-1018 also offers a practical solution for users who need uninterrupted networking performance without using a large traditional UPS system. Moreover, the compact battery backup system helps reduce downtime while protecting connected devices from sudden shutdowns. Its easy plug-and-play setup makes installation simple for both home and small business users. Specifications: 2000mAh backup battery capacity for networking devices Supports routers, CCTV cameras, modems, and ONU devices Multiple DC output options for wider compatibility Built-in overload, short circuit, and overcharge protection INPUT : 100-240Vac 50/60Hz OUTPUT : 5V/9V/12V/USB port/POE port
The PROLINK Enerhome PRO2000 Line Interactive UPS is designed to provide reliable backup power and voltage protection for computers, networking equipment, and home electronics. It helps keep connected devices running during short power interruptions and unstable power conditions. The UPS provides a 2KVA capacity and uses Automatic Voltage Regulation (AVR) technology. Additionally, it helps correct voltage fluctuations and provides stable power output to improve equipment protection. The PROLINK PRO2000 features a line interactive design that allows quick switching to battery mode during power failures. Moreover, it provides efficient backup support for essential devices while reducing power-related risks. The UPS includes protection features against overload, short circuit, surge, and low battery conditions. Furthermore, these safety functions help protect connected equipment during different operating situations. The PROLINK Enerhome PRO2000 is suitable for homes, offices, and small workspaces that need dependable power backup. Therefore, it provides a practical solution for protecting computers, routers, and other important electronic devices. The compact design makes the UPS easy to install in different environments. In addition, its reliable performance helps users maintain stable operation during unexpected power interruptions. The PROLINK Enerhome PRO2000 2KVA Line Interactive UPS combines backup power, AVR voltage regulation, and protection features. As a result, it provides a reliable power solution for everyday electronic equipment. Specifications: Capacity: 2000VA / 1200W Technology: Line Interactive with AVR Protection: Overload, Short Circuit, Surge, Low Battery Protection Input Voltage: 220VAC Output Voltage: 220VAC
PCE MX Online 3KVA 2700W is a high-performance online double-conversion UPS designed for critical power protection. It provides continuous, clean, and stable electricity for servers, network systems, and sensitive electronic equipment. In addition, PCE MX Online 3KVA 2700W uses true online double-conversion technology. Therefore, it delivers zero transfer time between mains and battery mode. Moreover, it provides pure sine wave output to ensure safe operation of connected devices. Furthermore, PCE MX Online 3KVA 2700W supports a 3000VA / 2700W load capacity. As a result, it can handle demanding setups such as multiple PCs and networking equipment. It also maintains stable voltage regulation under fluctuating input conditions. In addition, PCE MX Online 3KVA 2700W includes advanced protection features. Therefore, it guards against overload, short circuits, and power instability. Moreover, it is designed for professional environments that require uninterrupted power availability. Overall, PCE MX Online 3KVA 2700W delivers strong backup performance, zero-interruption switching, and reliable protection for critical systems. Specifications: 3000VA / 2700W high-capacity output Online double-conversion UPS technology Zero transfer time for uninterrupted power Pure sine wave output for sensitive equipment Overload and short-circuit protection system
General Topology Online double conversion Configuration Tower Part Number 9E1000I Rating (VA/Watts) 1000/800 Dimensions (H x W x D, mm) 356 x 228 x 144 Weight (kg) 9.5 Electrical Input Connection (1) IEC-320-C14 Input Voltage Range 176-300V without derating (up to 100-300V with derating) Nominal Voltage 208/220/230/240V Frequency 50/60 Hz autoselection Frequency Range 40-70 Hz Electrical Output Voltages 208V*/220V/230V/240V ±1% Voltage THD <2% for 100% linear load Outlets (4) IEC-320-C13 Overload Capacity 105%-130% : 60s, 130%-150% : 10s,>150% : ≥ 300ms Efficiency (Normal Mode) Up to 91% in Online mode Output Frequency 50/60 Hz autoselect Communications Communication Ports 1 USB port + 1 RS232 serial port (USB and RS232 ports cannot be used simultaneously) Communication Slot 1 slot for Network-M2, ModBus-MS or Relay-MS cards Power Management Software Intelligent Power Editions Environmental & Standards Audible Noise <37 dB @ typical load Operating Temperature 0 to 40°C Safety markings IEC/EN 62040-1 EMC Markings IEC/EN 62040 -2 Approvals CE, CB report (TUV) 2 Years Warranty manufacturer link
Specifications : -True Double-Conversion Online UPS – Mircoprocessor control optimizes reliability – Input power factor correction – Output Power Factor 0.80. – Wide input voltage (110V – 300V) – Converter mode available – ECO mode for enegry saving (Only available for 1 – 3 KVA) – Generator compatible – Adjustable battery number only available for 6K and up models – Smart SNMP works well with either USB or RS-232 together – Emergency power off function (EPO) only available for 6K / 10K models – Optional isolation transformer available. manufacturer link
APC Easy UPS On-Line SRV 10000VA 230V SRV10KI is a high-capacity online uninterruptible power supply designed for critical business infrastructure, servers, and data center environments. It provides continuous, clean, and stable power using true double-conversion technology. It delivers 10000VA / 10000W (approx.) power capacity for heavy-duty applications. Therefore, it can support multiple servers, networking equipment, and sensitive electronics during power failures or voltage fluctuations. In addition, it ensures uninterrupted operation for mission-critical systems. The UPS uses online double-conversion technology to fully isolate connected equipment from utility power disturbances. As a result, it provides consistent, regulated pure sine wave output at all times. It includes an LCD interface for real-time monitoring of system status, load, and battery conditions. Meanwhile, built-in protection features enhance system safety and operational reliability. APC designs the Easy UPS SRV series for enterprise-grade power protection. Therefore, this model is ideal for data centers, IT infrastructure, and critical business applications requiring maximum uptime. Manufacturer link Specifications: 10000VA high-capacity output Online double-conversion UPS system Pure sine wave power output LCD monitoring display Enterprise-grade power protection
Specifications : Le grand ups keor spx 1500va fr _310303 UPS 1500va
MARSRIVA SMART MINI DC UPS 10000MAH Capacity: 10000mAh / 37Wh. Output Interface: USB-A Output: 5V at 2.4A, DC Output: 5V / 9V / 12V (selectable) at 1.5A, POE Output: 5V at 2.4A. Dimensions: 104.5 x 170 x 30.8 mm. Net Weight: 360g. Color: Black. Specifications: MARSRIVA SMART MINI DC UPS 10000MAH Capacity: 10000mAh / 37Wh. Output Interface: USB-A Output: 5V at 2.4A, DC Output: 5V / 9V / 12V (selectable) at 1.5A, POE Output: 5V at 2.4A. Dimensions: 104.5 x 170 x 30.8 mm. Net Weight: 360g. Color: White.
INVO Online INH100 INVO Online INH100 Centralized server center, mainframe, network control center, computing center max efficiency UPS System . AC Input Bypass AC Output . Battery Fault Screen OFF ON LCD AC Input Bypass AC Output Battery Fault Screen OFF ON LCD INVO Online INH100 Full Specifications : INVO Online INH100 Centralized server center, mainframe, network control center, computing center INVO Online INH100 UPS High Frequency 1000 VA, LCD Display Inbuilt Battery 2 x 12V/9AH Specifications: Specifications : Centralized server center, mainframe, network control center, computing center INVO Online UPS High Frequency 1000 VA, LCD Display Inbuilt Battery 2 x 12V/9AH 1 year warranty Manufacturer Link
LiFePO4 BATTERY SYSTEM LPBF Series 48250-48300 48V 250ah Solar Panel Rechargeable Lithium Battery For Energy Storage System model LPBF48250 capacity 48V 12.5KWH Voltage 48V Rated Voltage 51.2V Charge Voltage 57.6V Discharge Voltage Range 48-57.6V MAX.Charge&Discharge Current 120A DOD 95% Modeles Connection 1-6 in parallel Ingress protection IP21 Cycle Life >6000, @25°C Working Temperature Range -10-50°C Net Weight(kg) 159KG Gross Weight(kg) 183KG Dimension(MM) 615*350*955MM 5 Years Warranty Specifications: LiFePO4 BATTERY SYSTEM LPBF Series 48250-48300 model LPBF48250 capacity 48V 12.5KWH Voltage 48V Rated Voltage 51.2V Charge Voltage 57.6V Discharge Voltage Range 48-57.6V 5 Years Warranty
Features • Advanced DSP and 3-level technology • Output power factor 1.0 • Active power factor correction (APFC), input power factor up to 0.99 • High efficiency 95% (up to 98% in ECO mode) • Advanced digital parallel technology • Wide input voltage range (11 0 – 288 Vac) and frequency range (40 -70Hz) • 50 I 60 Hz frequency auto sensing • Two modes of frequency conversion: 50 Hz input I 60 Hz output or 60 Hz input I 50 Hz output • Dual-input design, supporting independent bypass • Flexible battery configuration (settable 16-20 pes batteries) • Digitally controlled charger • High charging current available (Max. 12 A) • Charging voltage and current configured by demands • Linear derating in low voltage input reducing battery discharging times, extending the service life of battery • Intelligent battery management, automatic floating I equalizing charge control, charger dormancy control, increasing battery life by 50%• Ability to switch on the UPS with batteries • Settable delayed start time when mains power is restored, reducing the impact on power grid or generator • Fan speed varies intelligently with temperature, reducing noise and extending its service life • Equipped with self-aging function • Compact internal layout, miniaturized the complete unit for small footprint • LCD+LED display, multi-functional keys operation, friendly human-machine interface • Powerful background software for parameters configuration • Advanced multi-platform communications: RS232, USB, RS485, SNMP and dry contacts communication interfaces • Effective software and hardware protection function, robust self-diagnostic function, and abundant event log for check Available Options • RS232 and smart card slot included • Optional parallel function, battery temperature compensation, SNMP card, USB, RS485 card, dry contacts, EMD, and SMS alarms Rear Panel 1. RS232 2. EPO 3. Parallel Port (optional) 4. USB (optional) 5. Temperature Detection (optional) 6. Intelligent Slot 7. Reserved: for manual bypass or battery breaker or outlets ect. 8.Fans 9. Bypass Breaker 10. Input Breaker 11.GND 12.Terminals and Cover http://en.eastups.com/EA900G4610kVA/6754.jhtml
The Beco GP1200 1200VA 720W UPS delivers reliable power backup for home and office electronics. It keeps key devices running during outages. This helps prevent data loss and sudden shutdowns. Users gain peace of mind knowing devices stay protected. Moreover, the Beco GP1200 1200VA 720W UPS features 1200 VA capacity and 720 W output power for strong support. It handles computers, routers, modems, and monitors easily. Large systems stay powered long enough to save work. Performance stays stable and secure. In addition, the UPS includes built-in surge protection for reliable defense against voltage spikes. It guards appliances from unstable power conditions and electrical surges. This adds extra safety during storms or fluctuations. Protection stays consistent over time. Furthermore, the Beco GP1200 1200VA 720W UPS offers automatic voltage regulation without manual settings. It smooths voltage drops and spikes quickly. This helps connected devices run smoothly. Reliability increases in daily use. Also, the UPS provides battery backup when power fails. You can finish tasks and save important files before turning off systems. This reduces the risk of data corruption. Backup power feels dependable. In addition, the Beco GP1200 1200VA 720W UPS includes clear LED indicators for power and battery status. You can check performance at a glance. This helps monitor conditions with ease. Users stay informed during operation. Moreover, the UPS includes multiple output sockets for connecting more devices at once. This improves flexibility for busy workstations and entertainment setups. You can protect multiple electronics with one unit. Furthermore, the Beco GP1200 1200VA 720W UPS supports easy installation and quick setup. Users can connect devices without complicated steps. Setup remains simple for all users. Also, the compact design fits neatly on desks, shelves, or cabinets without taking much room. It blends well into home and office spaces. Portability stays practical. Overall, the Beco GP1200 1200VA 720W UPS delivers strong battery backup, surge protection, and smooth voltage regulation. It guards electronics and ensures uninterrupted use. This UPS is ideal for users seeking reliable, everyday power protection. Specifications: 1200VA, 720W, LED, Plastic Case Input: 140-290 VAC Output: 230VAC 50/60HZ 12V 7.5AH *2pcs, Universal Socket *4 + EU Plug With AVR, Bypass output Overload and short circuit protection
UPS PCE EXDC-2 MAX UPS Adapter for Cameras & Modems
Powerology Portable Power Generator,140400mAh Powerology 140400mAh Power Generator 500W Pure Sine-Wave Output -45W USB-C Power Delivery -18W USB-A Quick Charge -3.1A Dual USB Optimal Charge -220V UK AC Output -750W Max Surge
Specifications : GENERAL UPS Type : Tower Phase : Single phase with ground Rating (VA) : 2000 Nominal Power (W) : 1600 Standard Model Dimension (mm) : 397x 145 x 220 (D x W x H) Weight (kg) : 17 Long-run Model Dimension (mm) : 397 x 145 x 220 (D x W x H) Weight (kg) : 6.8 INPUT Connection Type : IEC 320-C14 Nominal Voltage : 200/208/220/230/240 VAC Voltage Range : 110-300 VAC (Load at 50%) 160-280 VAC (Load at 100%) Frequency Range : 45 ~ 70 Hz Power Factor : >= 0.99 OUTPUT Connection Type : 3 x Universal socket (PRO902WS) 2 x Universal socket (PRO902WL) Nominal Voltage : 200/208/220/230/240 VAC Voltage Regulation : ±1% Frequency Range (Synchronized Range) : 47 ~ 53 Hz or 57 ~ 63 Hz Frequency Range (Batt. Mode) : 50 Hz ± 0.25 Hz or 60 Hz ± 0.3 Hz Current Crest Ratio : 3:1 Harmonic Distortion ; ≤3% THD (Linear load) ≤6% THD (Non-linear load) ALARM & INDICATORS Battery Mode : Sounding every 4 seconds Low Battery : Sounding every second Overload : Sounding twice every second Fault : Continuously sounding LCD : Load level, Battery Level, AC mode, Battery mode, Bypass mode and Fault CONNECTIVITY, CONTROL & MONITORING Front panel : Status LED, Function keys, LCD display Communication : Smart RS232* USB : Port BATTERY Standard Model Type : 12V / 9Ah Numbers : 4 Typical Recharge Time : 4 hours recover to 90% capacity Long-run Model Type : Depending on the capacity of external batteries Number : 4/6/8 Charging Current (max) : 1A / 2A / 4A / 6A Adjustable REAR PANEL 1. AC Input 2. Input circuit breaker 3. USB Communication port 4. RS-232 communication port 5. Intelligent slot 6. External battery connection (Only available for L model) 7. Output receptacles
The PROLINK IPS5003 Inverter is designed to provide reliable backup power for homes, offices, and essential electronic devices. It helps users maintain power during outages and supports stable operation for different electrical equipment. The inverter provides a 5000VA capacity and delivers stable AC power output for compatible devices. Additionally, it supports backup power needs for appliances, computers, and other important electronics. The PROLINK IPS5003 features pure sine wave output to provide clean power for sensitive equipment. Moreover, this technology helps improve compatibility with devices that require stable electricity performance. The inverter includes an LCD display that allows users to monitor important system information. Furthermore, users can check battery status, input voltage, output voltage, and operating conditions easily. The PROLINK IPS5003 includes protection features against overload, short circuit, over-temperature, and low battery conditions. Therefore, it helps protect connected devices and improves system safety during operation. The inverter supports different backup power applications for homes and small offices. In addition, its practical design makes it suitable for users who need dependable energy support during power interruptions. The PROLINK IPS5003 Inverter combines high power capacity, pure sine wave technology, monitoring features, and protection functions. As a result, it provides a reliable backup power solution for everyday electrical needs. manufacturer link Specifications: Capacity: 5000VA Output Waveform: Pure Sine Wave Display: LCD Display Protection: Overload, Short Circuit, Over Temperature, Low Battery Protection Application: Backup Power for Home and Office Equipment
