Original product name: UPS 5E650IUSBDIN Eaton Line Interactive UPS 650VA / 360W, AVR, 1 Schuko (DIN) + 2 IEC, USB port, software, Input / Output jacks included for Telephone / Modem / Internet Line surge protection, 2 Years Warranty (Including Battery) 5E650IUSBDIN Eaton Line Interactive UPS 650VA / 360W, AVR, 1 Schuko (DIN) + 2 IEC, USB port, software, Input / Output jacks included for Telephone / Modem / Internet Line surge protection 2 Years Warranty (Including Battery)
General Topology Online double conversion Configuration Tower Part Number 9E1000I Rating (VA/Watts) 1000/800 Dimensions (H x W x D, mm) 356 x 228 x 144 Weight (kg) 9.5 Electrical Input Connection (1) IEC-320-C14 Input Voltage Range 176-300V without derating (up to 100-300V with derating) Nominal Voltage 208/220/230/240V Frequency 50/60 Hz autoselection Frequency Range 40-70 Hz Electrical Output Voltages 208V*/220V/230V/240V ±1% Voltage THD <2% for 100% linear load Outlets (4) IEC-320-C13 Overload Capacity 105%-130% : 60s, 130%-150% : 10s,>150% : ≥ 300ms Efficiency (Normal Mode) Up to 91% in Online mode Output Frequency 50/60 Hz autoselect Communications Communication Ports 1 USB port + 1 RS232 serial port (USB and RS232 ports cannot be used simultaneously) Communication Slot 1 slot for Network-M2, ModBus-MS or Relay-MS cards Power Management Software Intelligent Power Editions Environmental & Standards Audible Noise <37 dB @ typical load Operating Temperature 0 to 40°C Safety markings IEC/EN 62040-1 EMC Markings IEC/EN 62040 -2 Approvals CE, CB report (TUV) 2 Years Warranty manufacturer link
PROLINK 2KVA AUTO VOLTAGE REGULATOR W/LCD PVR2000D PROLiNK PVR Series is designed to automatically maintain a constant voltage level to protect sensitive electronics from brownouts, under voltages and over voltages. The PROLiNK PVR takes efficiency to a new level with its microprocessor controller tailored to allow extremely fast response for detecting and regulating voltage. Equipped with a time-delay function, the PVR is able to protect connected devices from power-back surges.
Specifications : High Reliability Advanced DSP (Digital signal processors) technology Variable speed fan Effective software and hardware protection function, robust self-diagnostic function, and abundant event log for check Advanced digital parallel technology High Availability Wide input voltage range, 50 / 60 Hz frequency auto sensing Linear derating in low voltage input reducing battery discharging times, extending the service life of battery Dual-input design, supporting independent bypass Output power factor improved from 0.9 to 1, load capacity increased by 13% Flexible battery configuration (settable 16 – 20 pcs batteries) Charging voltage and current configured by demands Ability to switch on the UPS with batteries Settable delayed start time when mains power is restored, reducing the impact on power grid or generator Two modes of frequency conversion: 50 Hz input / 60 Hz output or 60 Hz input / 50 Hz output High Usability LCD+LED display, multi-functional keys operation, friendly human-machine interface Powerful background software for parameters configuration and online updating Compact internal layout, miniaturized the complete unit for small footprint High Intelligence Advanced multi-platform communications: RS232, USB, RS485, SNMP and dry contacts communication interfaces Intelligent battery management, automatic floating / equalizing charge control, charger dormancy control, increasing battery life by 50% Energy Conservation and Environment Protection Active power factor correction (APFC), input power factor up to 0.99 High efficiency 95% (up to 98% in ECO mode) Automatic power On/Off according to the load capacity set by users Equipped with self-aging function
Legrand Ups Keor SPX Line Interactive 1KVA/600W- 310302 Specifications : Le grand ups keor spx 1kva 310302 UPS 1KVA 1000VA
Specifications : UPS Type Tower Phase Single phase with ground Rating (VA) 10000 Nominal Power (W) 8000 Standard ModelDimension (mm) 442 x 190 x 688 (D x W x H) Weight (kg) 66 Long-run ModelDimestions (mm) 442 x 190 x 318 (D x W x H) Weight (kg) 16 INPUT Connection Type Terminal Nominal Voltage 208/220/230/240VAC Voltage Range 110-300 VAC (Load at 50%)176-300 VAC (Load at 100%) Frequency Range 46~54 Hz or 56~64 Hz Power Factor >= 0.99 OUTPUT Connection Type Terminal Output Voltage 208/220/230/240VAC Voltage Regulation ±1% Frequency Range (Synchronized Range) 46~54 Hz or 56~64 Hz Frequency Range (Batt. Mode) 50Hz or 60Hz +/-0.1Hz Current Crest Ratio 3:1 Harmonic Distortion ≤3% THD (Linear load)≤5% THD (Non-linear load) ALARM & INDICATORS Battery Mode Sounding every 4 seconds Low Battery Sounding every second Overload Sounding twice every second Fault Continuously sounding LCD Load level, Battery Level, AC mode, Battery mode, Bypass mode and Fault CONNECTIVITY, CONTROL & MONITORING Front panel Status LED, Function keys, LCD display Communication Smart RS232*USB Port Emergency Power Off (EPO) BATTERY Standard ModelType 12V / 9Ah Numbers 16 Typical Recharge Time 9 hours recover to 90% capacity Long-run ModelType Depending on the capacity of external batteries Number 16 ~ 20 (Adjustable) Charging Current (max) 1A/2A/4A/6A (Adjustable, 6A is only available for 16pcs batteries) manufacturer link
Specifications : -True Double-Conversion Online UPS – Mircoprocessor control optimizes reliability – Input power factor correction – Output Power Factor 0.80. – Wide input voltage (110V – 300V) – Converter mode available – ECO mode for enegry saving (Only available for 1 – 3 KVA) – Generator compatible – Adjustable battery number only available for 6K and up models – Smart SNMP works well with either USB or RS-232 together – Emergency power off function (EPO) only available for 6K / 10K models – Optional isolation transformer available. manufacturer link
Prolink PRO906WS 6KVA / 4800W Online UPS with AVR is a high-performance power backup solution designed for critical devices, servers, and sensitive electronics. It provides stable and continuous power protection against outages and voltage fluctuations. It features a 6000VA (4800W) capacity with pure sine wave output. Therefore, it ensures clean and reliable power delivery for computers, networking equipment, and industrial systems. In addition, it protects devices from sudden power loss and electrical damage. The UPS uses online double-conversion technology with built-in AVR (Automatic Voltage Regulation). As a result, it delivers consistent voltage output and improves equipment safety during unstable power conditions. It supports heavy-duty usage and long backup operation depending on load. Meanwhile, its robust design makes it suitable for business, IT infrastructure, and professional environments. Prolink designs its UPS systems for reliability and protection. Therefore, this model is an ideal choice for users who need uninterrupted and stable power supply for critical operations. manufacturer link Specifications: 6000VA / 4800W high capacity Pure sine wave output Online double-conversion UPS Built-in AVR voltage regulation Ideal for servers and critical systems
Features • Advanced DSP and 3-level technology • Output power factor 1.0 • Active power factor correction (APFC), input power factor up to 0.99 • High efficiency 95% (up to 98% in ECO mode) • Advanced digital parallel technology • Wide input voltage range (11 0 – 288 Vac) and frequency range (40 -70Hz) • 50 I 60 Hz frequency auto sensing • Two modes of frequency conversion: 50 Hz input I 60 Hz output or 60 Hz input I 50 Hz output • Dual-input design, supporting independent bypass • Flexible battery configuration (settable 16-20 pes batteries) • Digitally controlled charger • High charging current available (Max. 12 A) • Charging voltage and current configured by demands • Linear derating in low voltage input reducing battery discharging times, extending the service life of battery • Intelligent battery management, automatic floating I equalizing charge control, charger dormancy control, increasing battery life by 50%• Ability to switch on the UPS with batteries • Settable delayed start time when mains power is restored, reducing the impact on power grid or generator • Fan speed varies intelligently with temperature, reducing noise and extending its service life • Equipped with self-aging function • Compact internal layout, miniaturized the complete unit for small footprint • LCD+LED display, multi-functional keys operation, friendly human-machine interface • Powerful background software for parameters configuration • Advanced multi-platform communications: RS232, USB, RS485, SNMP and dry contacts communication interfaces • Effective software and hardware protection function, robust self-diagnostic function, and abundant event log for check Available Options • RS232 and smart card slot included • Optional parallel function, battery temperature compensation, SNMP card, USB, RS485 card, dry contacts, EMD, and SMS alarms Rear Panel 1. RS232 2. EPO 3. Parallel Port (optional) 4. USB (optional) 5. Temperature Detection (optional) 6. Intelligent Slot 7. Reserved: for manual bypass or battery breaker or outlets ect. 8.Fans 9. Bypass Breaker 10. Input Breaker 11.GND 12.Terminals and Cover http://en.eastups.com/EA900G4610kVA/6754.jhtml
Specifications : Le grand ups keor spx 800va 310301 1year warranty ups 800va
INVO Online INH600 INVO Online UPS High Frequency 6000 VA, LCD Display Inbuilt Battery 16 x 12V/7Ah online ups system high frequency and high load management. Full Specifications : AC Input Bypass AC Output Battery Fault Screen LCD AC Input Bypass AC Output Battery Fault Screen LCD 6 KVA/4200W Half -Load 120 -300VAC, Full -Load 165V -300VAC 176V`~276VAC Frequency 45.5Hz ~ 54.5Hz Power Factor 0.95 Output Voltage 220/230/240V ± 3% Waveform True Sine wave Frequency 50/60Hz ± 0.5 Distortion <3%(linear Load); <5%(Non -linear Load) Crest Factor 3:1 Efficiency 85% Overload Capacity 110%-150%:Switch to Bypass after 1min; >150%:Shutdown afte r 200ms Short Circuit UPS output turn off and alarm Battery Model 12V Sealed Lead -Acid Voltage 36DC 96DC 240C Configuration Recharge 90% Capacity after 8 Hours charging RS232 ;SNMP (Optional) LCD & LED Utility, Inverter, Bypass, Battery, Load ,Battery Mode ,Frequency , UPS Fault Indicator Audible Alarm -Battery Discharge Utility Failure, Beep/4s;Battery Low, Beep/1s UPS Abnornmal Continuous Beep and Red Led On Noise <55db (1Meter) Temperature 0°C~40°C Humidity 10%~90% Optional 19 inch Rack -mount Dimension (W * D * H) mm 357 x 144 x 215 439x190x341 514X262X455 (Long Time Mode) 514x262x710 (Standard Model) Specifications: Specifications : AC Input Bypass AC Output Battery Fault Screen LCD AC Input Bypass AC Output Battery Fault Screen LCD 1 year warranty Manufacturer Link
Prolink PRO3000SFCU 3000VA is a line-interactive UPS designed to provide stable backup power for PCs, servers, networking devices, and sensitive electronics. It ensures continuous operation during power cuts and voltage fluctuations. In addition, Prolink PRO3000SFCU 3000VA supports a wide input voltage range of 140–300VAC. Therefore, it stabilizes unstable electricity using automatic voltage regulation (AVR). Moreover, it delivers a fast transfer time of around 2ms for seamless switching between mains and battery mode. Furthermore, Prolink PRO3000SFCU 3000VA includes four 12V/10Ah batteries for extended backup support. As a result, it provides reliable runtime for critical systems depending on load. It also supports simulated sine wave output for compatible devices. In addition, Prolink PRO3000SFCU 3000VA features intelligent microprocessor control. Therefore, it improves efficiency, protection, and battery management. Moreover, it includes indicators and alarms for battery, overload, and fault conditions. Overall, Prolink PRO3000SFCU 3000VA delivers strong backup performance, stable voltage regulation, and reliable protection for home and office power needs. Specifications: 3000VA capacity for PCs and office equipment Line-interactive UPS with AVR voltage regulation Wide input range 140–300VAC for unstable power Fast ~2ms transfer time for uninterrupted switching Four 12V/10Ah batteries for extended backup support
INVO online INH1000 NVO Online UPS High Frequency 10000 VA, LCD Display Inbuilt Battery 16 x 12V/9 Ah Specifications: Specifications : AC Input Bypass AC Output Battery Fault Screen LCD AC Input Bypass AC Output Battery Fault Screen LCD 1 year warranty Manufacturer Link
The PCE Battery 12V 9Ah is a reliable and efficient power solution for various applications. Whether you need backup power for a UPS system or energy for your equipment, this battery ensures consistent performance. With a 12V output and 9Ah capacity, the PCE Battery delivers the power you need to keep your devices running smoothly. It’s ideal for use in security systems, emergency lighting, and other critical equipment. Designed for durability, the PCE Battery offers a long lifespan and requires minimal maintenance. Its sealed, lead-acid design ensures that it remains leak-proof and safe for use in different environments. The PCE Battery 12V 9Ah is compatible with a wide range of devices and systems. Whether you’re using it for home backup, industrial equipment, or a solar energy system, it provides dependable power when needed. This battery features advanced technology for efficient energy storage and reliable discharge. It also includes built-in safety features like overcharge and short-circuit protection, ensuring safe and stable operation. One of the key benefits of the PCE Battery is its easy installation. Whether you’re an expert or a beginner, this battery can be quickly installed and connected to your system with minimal effort. In conclusion, the PCE Battery 12V 9Ah is a perfect combination of reliability, performance, and safety. Choose this battery for a stable power supply and enjoy long-lasting energy for all your essential devices. Specifications: Voltage : 12V Capacity : 9Ah
INVO Online INH300 Centralized server center, mainframe, network control center, computing center Full Specifications : 3KVA 2100 W Half -Load 120 -300VAC, Full -Load 165V -300VAC 45.5Hz ~ 54.5Hz 220/230/240V ± 3% Waveform True Sine wave Frequency 50/60Hz ± 0.5 Distortion <3%(linear Load); <5%(Non -linear Load) Crest Factor 3:1 Efficiency 85% Overload Capacity 110%-150%:Switch to Bypass after 1min; >150%:Shutdown afte r 200ms Short Circuit UPS output turn off and alarm RS232 ;SNMP (Optional) LCD & LED Utility, Inverter, Bypass, Battery, Load ,Battery Mode ,Frequency , UPS Fault Indicator Audible Alarm -Battery Discharge Utility Failure, Beep/4s;Battery Low, Beep/1s UPS Abnornmal Continuous Beep and Red Led On Noise <55db (1Meter) Temperature 0°C~40°C Humidity 10%~90% Optional 19 inch Rack -mount Dimension (W * D * H) mm 357 x 144 x 215 439x190x341 514X262X455 (Long Time Mode) 514x262x710 (Standard Model) Specifications: Specifications : INVO Online UPS High Frequency 3000 VA, LCD Display Inbuilt Battery 6 x 12V/7Ah AC Input 2. Bypass 3. AC Output 4. Battery 5. Fault 6. Screen 9. LCD 1. AC Input 2. Bypass 3. AC Output 4. Battery 5. Fault 6. Screen 9. LCD 1 year warranty Manufacturer Link
Specifications : GENERAL Rated Power 5000VA / 5000W Communication Interface Removable USB / RS232 / RS485 / Bluetooth / Dry-contact Dimension D x W x H (mm) 115 x 300 x 400 Net Weight (kgs) 13 INPUT Voltage 230VAC Selectable Voltage Range 170 ~ 280 VAC (For Personal Computers)90 ~ 280 VAC (For Home Appliances) Frequency Range 50Hz / 60Hz (Auto sensing) OUTPUT AC Voltage Regulation (Batt. Mode) 230VAC ± 5% Surge Power 10000VA Efficiency (Peak) 90% ~ 93% Transfer Time 15 ms (For Personal Computers)20 ms (For Home Appliances) Waveform Pure sine wave BATTERY Battery Voltage 48VDC Floating Charge Voltage 54VDC Overcharge Protection 63VDC SOLAR & AC CHARGER Solar Charger Type MPPT Maximum PV Array Open Circuit Voltage 500VDC Maximum PV Array Power 5000W MPP Range @ Operating Voltage 120VDC~450VDC Maxmum Solar Charge Current 100A Maximum AC Charge Current 100A manufacturer link
Features • Advanced DSP and 3-level technology • Output power factor 1.0 • Active power factor correction (APFC), input power factor up to 0.99 • High efficiency 95% (up to 98% in ECO mode) • Advanced digital parallel technology • Wide input voltage range (11 0 – 288 Vac) and frequency range (40 -70Hz) • 50 I 60 Hz frequency auto sensing • Two modes of frequency conversion: 50 Hz input I 60 Hz output or 60 Hz input I 50 Hz output • Dual-input design, supporting independent bypass • Flexible battery configuration (settable 16-20 pes batteries) • Digitally controlled charger • High charging current available (Max. 12 A) • Charging voltage and current configured by demands • Linear derating in low voltage input reducing battery discharging times, extending the service life of battery • Intelligent battery management, automatic floating I equalizing charge control, charger dormancy control, increasing battery life by 50% • Ability to switch on the UPS with batteries • Settable delayed start time when mains power is restored, reducing the impact on power grid or generator • Fan speed varies intelligently with temperature, reducing noise and extending its service life • Equipped with self-aging function • Compact internal layout, miniaturized the complete unit for small footprint • LCD+LED display, multi-functional keys operation, friendly human-machine interface • Powerful background software for parameters configuration • Advanced multi-platform communications: RS232, USB, RS485, SNMP and dry contacts communication interfaces • Effective software and hardware protection function, robust self-diagnostic function, and abundant event log for check Available Options • RS232 and smart card slot included • Optional parallel function, battery temperature compensation, SNMP card, USB, RS485 card, dry contacts, EMD, and SMS alarms Specifications Voltage range OUTPUT Output wiring Rated voltage Voltage regulation Frequency Waveform Power factor Total harmonic distortion (THDv) Crest factor Overload BATTERIES DC voltage Number of battery lnbuilt battery (standard model) Charging current Recharge time EM Efficiency Transfer time Protections Max. number of parallel connections Communications Display OTHERS Operating temperature Storage temperature Relative humidity Altitude !Prating Noise level at 1 m Dimensions (W x D x H) (mm) Packaged dimensions (W x D x H) (mm) Net weight (kg) Gross weight (kg) 110- 176 Vac (linear derating between 50% and 100% load); 176- 288 Vac (no derating) Single-phase three-wire (1 Cll + N + PE) 208 (PF=0.9) 1220 1230 1240 Vac ± 1% Synchronized to bypass in mains mode; 50 160 Hz±0.1% Hz in battery mode Sinusoidal 1 s 1% (linear load); s 4% (non-linear load) 3:1 105%- 110% for 10 min, 110%- 125% for 1 min, 126%- 150% for 30 s 192 Vdc (192- 240 Vdc settable) 16 pes (16- 20 settable) 12VI7Ahx16 I 12VI9Ahx16 Standard model: 1 A; Long time model: 5A(default), 1 – 5Asettable, 12A (optional) Standard model: 90% capacity restored in 8 hours; Long time model: depend on the capacity of battery ~ 94% at 100% load, max. 95% at 60% load,~ 98% in ECO mode Oms Short-circuit, overload, overtemperature, battery low voltage, overvoltage, undervoltage and fan failure 4 RS232 (standard), USB I RS4851 dry contacts I SNMP I baltery temperature compensation (optional) LCD+ LED O”C – 40″C -25″C – 55″C (without battery) 0 – 95% (non-condensing) s 1 000 m, derating 1% for each additional 1 00 m IP20 S55dB S58dB 191 X 465 X 711 (S), 191 X 465 X 350 (H) 191 X 495 X 711 (S), 191 X 495 X 350 (H) 310 X 654 X 941 (S), 318 X 595 X 475 (H) 310 X 685 X 941 (S), 318 X 617 X 475 (H) 53 (S), 14.5 (H) 62 (S), 16.5 (H) 61 (S), 16 (H) 70 (S), 18 (H)
The Twist Online High Frequency UPS 3KVA TWUP3000/HF delivers reliable backup power for servers, networking systems, and professional equipment. It uses online double conversion technology for continuous clean power output. Additionally, the high-frequency design improves efficiency and reduces power interruption risks. Moreover, the UPS includes an LCD display for real-time system monitoring and status alerts. It features internal 6x12V/9Ah batteries for backup operation during outages. Therefore, it helps protect sensitive devices from voltage fluctuations and sudden power loss. Furthermore, the TWUP3000/HF supports pure sine wave output for stable performance with critical equipment. It also includes overload, short-circuit, and overheating protection for safer operation. Additionally, the compact tower design fits office, server room, and IT environments easily. Specifications: 3KVA online double conversion UPS technology Internal 6x12V/9Ah rechargeable batteries LCD display for real-time monitoring Pure sine wave output for stable power delivery Overload and short-circuit protection system
UPS ONLINE 3KVA 2400W 1 YEAR WARRANTY ABSOLUTELY PURE SINUSWELLE – With this inverter / inverter you operate your 220V devices via a 24V battery and a continuous power of 2400W 3KVA. Inverter is a device that allows you to use electrical devices everywhere, even when you are not at the power source MULTIFUNCTION HYBRID UNIT – Thanks to the small LCD display, it is also possible to charge the batteries with AC / solar charge controllers, setting the input voltage range and charging current. MODERN PROTECTION FEATURES – The device has many modern safety features such as: overload protection, overheating protection, short-circuit protection, so it is also suitable for home appliances, as well as microwaves, air conditioners, refrigerator, fan and daylight lamp. HIGH QUALITY MATERIALS – Equipped with PWM control, the inverter generates a pleasing amount of waste heat.
The PROLINK Enerhome PRO2000 Line Interactive UPS is designed to provide reliable backup power and voltage protection for computers, networking equipment, and home electronics. It helps keep connected devices running during short power interruptions and unstable power conditions. The UPS provides a 2KVA capacity and uses Automatic Voltage Regulation (AVR) technology. Additionally, it helps correct voltage fluctuations and provides stable power output to improve equipment protection. The PROLINK PRO2000 features a line interactive design that allows quick switching to battery mode during power failures. Moreover, it provides efficient backup support for essential devices while reducing power-related risks. The UPS includes protection features against overload, short circuit, surge, and low battery conditions. Furthermore, these safety functions help protect connected equipment during different operating situations. The PROLINK Enerhome PRO2000 is suitable for homes, offices, and small workspaces that need dependable power backup. Therefore, it provides a practical solution for protecting computers, routers, and other important electronic devices. The compact design makes the UPS easy to install in different environments. In addition, its reliable performance helps users maintain stable operation during unexpected power interruptions. The PROLINK Enerhome PRO2000 2KVA Line Interactive UPS combines backup power, AVR voltage regulation, and protection features. As a result, it provides a reliable power solution for everyday electronic equipment. Specifications: Capacity: 2000VA / 1200W Technology: Line Interactive with AVR Protection: Overload, Short Circuit, Surge, Low Battery Protection Input Voltage: 220VAC Output Voltage: 220VAC
The ProLink PRO910WL Professional II Series Online UPS is designed to provide stable and reliable power protection for servers, networking equipment, and critical electronic systems. It helps maintain continuous operation during power interruptions and protects connected devices from unstable electricity. The UPS provides a 10000VA capacity with an 8000W power rating. Additionally, it uses online double conversion technology to deliver clean and consistent power output for sensitive equipment that requires reliable energy support. The ProLink PRO910WL supports pure sine wave output for improved compatibility with different electronic devices. Moreover, its advanced power management system helps maintain stable voltage and frequency during changing power conditions. The UPS includes an LCD display that allows users to monitor important system information. Furthermore, the display provides details about input voltage, output voltage, battery status, load level, and operating conditions. The PRO910WL supports external battery configurations for extended backup time. In addition, it includes protection features against overload, short circuit, over-temperature, and battery-related issues to help protect connected equipment. The UPS is suitable for data centers, offices, industrial environments, and other locations that require dependable power backup. Therefore, it provides a practical solution for users who need continuous power protection for important systems. The ProLink PRO910WL Professional II Series Online UPS combines high power capacity, online protection technology, monitoring features, and safety functions. As a result, it delivers reliable backup power for critical applications. Specifications: Capacity: 10000VA / 8000W UPS Type: Online Double Conversion Output Waveform: Pure Sine Wave Display: LCD Display Protection: Overload, Short Circuit, Over Temperature, Battery Protection
APC UPS Accessories SURT192RMXLBP2 APC Smart-UPS RT192V RM 15/20KVA SURT models Battery Pack 2 Rows
Specifications : GENERAL UPS Type : Tower Phase : Single phase with ground Rating (VA) : 2000 Nominal Power (W) : 1600 Standard Model Dimension (mm) : 397x 145 x 220 (D x W x H) Weight (kg) : 17 Long-run Model Dimension (mm) : 397 x 145 x 220 (D x W x H) Weight (kg) : 6.8 INPUT Connection Type : IEC 320-C14 Nominal Voltage : 200/208/220/230/240 VAC Voltage Range : 110-300 VAC (Load at 50%) 160-280 VAC (Load at 100%) Frequency Range : 45 ~ 70 Hz Power Factor : >= 0.99 OUTPUT Connection Type : 3 x Universal socket (PRO902WS) 2 x Universal socket (PRO902WL) Nominal Voltage : 200/208/220/230/240 VAC Voltage Regulation : ±1% Frequency Range (Synchronized Range) : 47 ~ 53 Hz or 57 ~ 63 Hz Frequency Range (Batt. Mode) : 50 Hz ± 0.25 Hz or 60 Hz ± 0.3 Hz Current Crest Ratio : 3:1 Harmonic Distortion ; ≤3% THD (Linear load) ≤6% THD (Non-linear load) ALARM & INDICATORS Battery Mode : Sounding every 4 seconds Low Battery : Sounding every second Overload : Sounding twice every second Fault : Continuously sounding LCD : Load level, Battery Level, AC mode, Battery mode, Bypass mode and Fault CONNECTIVITY, CONTROL & MONITORING Front panel : Status LED, Function keys, LCD display Communication : Smart RS232* USB : Port BATTERY Standard Model Type : 12V / 9Ah Numbers : 4 Typical Recharge Time : 4 hours recover to 90% capacity Long-run Model Type : Depending on the capacity of external batteries Number : 4/6/8 Charging Current (max) : 1A / 2A / 4A / 6A Adjustable REAR PANEL 1. AC Input 2. Input circuit breaker 3. USB Communication port 4. RS-232 communication port 5. Intelligent slot 6. External battery connection (Only available for L model) 7. Output receptacles
APC Easy UPS SRV, 1600 Watts / 2 KVA, Online double conversion, Sine wave, 230V, Multi-function LCD status and control console, Surge Protection and Filtering, Generator compatible, Management Software, USB, 2 years warranty Electronics and Battery