General Topology Online double conversion Configuration Tower Part Number 9E3000I Rating (VA/Watts) 3000/2400 Dimensions (H x W x D, mm) 399 x 330 x 190 Weight (kg) 24.2 Warranty 2 years Electrical Input Connection (1) IEC-320-C20 Input Voltage Range 176-300V without derating (up to 100-300V with derating) Nominal Voltage 208/220/230/240V Frequency 50/60 Hz autoselection Frequency Range 40-70 Hz Electrical Output Voltages 208V*/220V/230V/240V ±1% Voltage THD <2% for 100% linear load Outlets (6) IEC-320-C13 (1) IEC-320-C19 Overload Capacity 105%-130% : 60s, 130%-150% : 10s,>150% : ≥ 300ms Efficiency (Normal Mode) Up to 91% in Online mode Output Frequency 50/60 Hz autoselect Communications Communication Ports 1 USB port + 1 RS232 serial port (USB and RS232 ports cannot be used simultaneously) Communication Slot 1 slot for Network-M2, ModBus-MS or Relay-MS cards Power Management Software Intelligent Power Editions Environmental & Standards Audible Noise <37 dB @ typical load Operating Temperature 0 to 40°C Safety markings IEC/EN 62040-1 EMC Markings IEC/EN 62040 -2 Approvals CE, CB report (TUV)
APC UPS Accessories SRVRK1 APC Easy UPS RAIL KIT, 700MM, 1 – 10KVA (Rackable SRV models)
Specifications : Brand HAWK Package Dimensions 59.2 x 54.5 x 19.8 cm; 9 Kilograms Item model number HAWK202011 Manufacturer HAWK Wattage 720 watts Are Batteries Included Yes Item Weight 9 kg
Onduleur tour Keor LP avec batterie avec 2 prises de courant 2P+T + 6 prises IEC 10A – 3000VA 2700W – port USB et RS232 1 YEAR WARRANTY
Prolink PRO3000SFCU 3000VA is a line-interactive UPS designed to provide stable backup power for PCs, servers, networking devices, and sensitive electronics. It ensures continuous operation during power cuts and voltage fluctuations. In addition, Prolink PRO3000SFCU 3000VA supports a wide input voltage range of 140–300VAC. Therefore, it stabilizes unstable electricity using automatic voltage regulation (AVR). Moreover, it delivers a fast transfer time of around 2ms for seamless switching between mains and battery mode. Furthermore, Prolink PRO3000SFCU 3000VA includes four 12V/10Ah batteries for extended backup support. As a result, it provides reliable runtime for critical systems depending on load. It also supports simulated sine wave output for compatible devices. In addition, Prolink PRO3000SFCU 3000VA features intelligent microprocessor control. Therefore, it improves efficiency, protection, and battery management. Moreover, it includes indicators and alarms for battery, overload, and fault conditions. Overall, Prolink PRO3000SFCU 3000VA delivers strong backup performance, stable voltage regulation, and reliable protection for home and office power needs. Specifications: 3000VA capacity for PCs and office equipment Line-interactive UPS with AVR voltage regulation Wide input range 140–300VAC for unstable power Fast ~2ms transfer time for uninterrupted switching Four 12V/10Ah batteries for extended backup support
LiFePO4 BATTERY SYSTEM LPBF Series 48250-48300 48V 250ah Solar Panel Rechargeable Lithium Battery For Energy Storage System model LPBF48250 capacity 48V 12.5KWH Voltage 48V Rated Voltage 51.2V Charge Voltage 57.6V Discharge Voltage Range 48-57.6V MAX.Charge&Discharge Current 120A DOD 95% Modeles Connection 1-6 in parallel Ingress protection IP21 Cycle Life >6000, @25°C Working Temperature Range -10-50°C Net Weight(kg) 159KG Gross Weight(kg) 183KG Dimension(MM) 615*350*955MM 5 Years Warranty Specifications: LiFePO4 BATTERY SYSTEM LPBF Series 48250-48300 model LPBF48250 capacity 48V 12.5KWH Voltage 48V Rated Voltage 51.2V Charge Voltage 57.6V Discharge Voltage Range 48-57.6V 5 Years Warranty
The PROLINK Enerhome PRO2000 Line Interactive UPS is designed to provide reliable backup power and voltage protection for computers, networking equipment, and home electronics. It helps keep connected devices running during short power interruptions and unstable power conditions. The UPS provides a 2KVA capacity and uses Automatic Voltage Regulation (AVR) technology. Additionally, it helps correct voltage fluctuations and provides stable power output to improve equipment protection. The PROLINK PRO2000 features a line interactive design that allows quick switching to battery mode during power failures. Moreover, it provides efficient backup support for essential devices while reducing power-related risks. The UPS includes protection features against overload, short circuit, surge, and low battery conditions. Furthermore, these safety functions help protect connected equipment during different operating situations. The PROLINK Enerhome PRO2000 is suitable for homes, offices, and small workspaces that need dependable power backup. Therefore, it provides a practical solution for protecting computers, routers, and other important electronic devices. The compact design makes the UPS easy to install in different environments. In addition, its reliable performance helps users maintain stable operation during unexpected power interruptions. The PROLINK Enerhome PRO2000 2KVA Line Interactive UPS combines backup power, AVR voltage regulation, and protection features. As a result, it provides a reliable power solution for everyday electronic equipment. Specifications: Capacity: 2000VA / 1200W Technology: Line Interactive with AVR Protection: Overload, Short Circuit, Surge, Low Battery Protection Input Voltage: 220VAC Output Voltage: 220VAC
The Beco GS3000 3000VA 1800W UPS delivers powerful backup power for demanding home, office, and business setups. It supports high-performance desktops, servers, and networking systems. This UPS helps prevent data loss and sudden shutdowns during power outages. Users enjoy dependable protection while working and gaming. Moreover, the Beco GS3000 3000VA 1800W UPS offers a strong 3000 VA capacity with 1800 W output power for heavy electrical loads. It keeps multiple devices powered longer during interruptions. This improves system stability and uptime. Reliability stays consistent under heavy use. In addition, the UPS features built-in surge protection for shielding electronics against voltage spikes. It guards your devices from electrical damage. This adds extra peace of mind during storms and unstable power. Protection remains strong and consistent. Furthermore, the Beco GS3000 3000VA 1800W UPS includes automatic voltage regulation to correct lows and highs. It balances voltage without manual input. As a result, connected systems receive steady power. This helps prolong device lifespan. Also, the UPS delivers reliable battery backup when electricity fails. You can save work and safely shut down devices before the battery runs out. This prevents data corruption and interruptions. Backup support feels dependable. In addition, the Beco GS3000 3000VA 1800W UPS includes clear LED indicators for easy status checks. You can monitor power and battery conditions at a glance. Monitoring becomes simple and intuitive. Users stay informed. Moreover, the UPS supports multiple output sockets for connecting many devices. This increases flexibility for busy workstations, servers, and media setups. You can protect key electronics with one unit. Furthermore, the Beco GS3000 3000VA 1800W UPS supports plug-and-play installation without complex steps. Setup is fast and stress-free for all users. Connections remain secure and organized. Also, the sturdy and compact design fits desks, shelves, and racks without taking much space. It blends well into office and home environments. Overall, the Beco GS3000 3000VA 1800W UPS delivers strong battery backup, surge protection, and steady voltage regulation. This UPS is ideal for users who need powerful and dependable power protection daily. Specifications: 3000VA, 1800W, LCD, Metal Case Input: 145-290 VAC Output: 230VAC 50/60HZ 12V 9AH *4pcs, Universal Socket *4 + EU Plug With AVR, Bypass output Overload and short circuit protection
APC Easy UPS SRV, 1600 Watts / 2 KVA, Online double conversion, Sine wave, 230V, Multi-function LCD status and control console, Surge Protection and Filtering, Generator compatible, Management Software, USB, 2 years warranty Electronics and Battery
PCE VX Online 1 KVA 800W Internal Batteries Double Conversion Online- Pure Sine Wave Model VX 1K Input Rating Voltage Frequency Voltage range Power Factor THDi 1000VA 220V, 230V, 240V, 1Ø 2Wires 40~70Hz 176-300 VAC at 100% load, 110-300 VAC at 50% load >99% <5% Ouput Active Power @ PF=0.9 Voltage (on battery) Frequency (on battery) Transfer Time Efficiency UPS Design Technology Output Wave Form Total Harmonic distortion (THD) Crest Factor 900W 220V, 230V, 240V, +/-1% (selectable output voltage), 1Ø 2Wires 50/60 Hz +/-0.2% 0 ms 93% Online double conversion design Pure Sinewave ≤3% (linear load), ≤5% (non linear load) 3:1 Protection Overload Protection Short Circuit Protection 110% for 10min, 130% for 1min, >130% for 3sec UPS output cuts off immediately using input fuse/circuit breaker protection System Display LCD indicators Load level, Battery level, AC mode, Battery mode, Bypass mode, and Fault indicators Alarm Battery mode Low battery Overload Fault Sounding every 4 second Sounding every second Sounding twice every second Continuously sounding Battery Battery Type Typical Recharge Time DC Voltage Charging Current Back up time(1/2 Load) 12V 9Ah 4 hours to 90% Full capacity 24VDC 1A 10~15 min depending on load Communication USB or RS-232 SNMP* Compatibility Interface with power management software Power Management from SNMP manager and web browser Supports Windows family, Linux, Unix and Mac Physical W x D x H mm Net Weight Kgs(lbs) 145x282x220mm 9.8Kg(21.6lb) Environment Operating Temperature Storage Temperature Altitude Audible noise Relative Humidity 0 – 40 °C / 32 ~ 104°F -20 ~ 50°C / -4 ~ 122°F 1,500 meters max <50dBA at 1 Meter 20 to 90% humidity (non-condensing) Standards & Certifications Performance Safety EMC (EMS / EMI) Design, production, & services Environment Marking & Certifications EN50091-3/IEC 62040-3 UL 1778, CE, EN 50091-1,EN 60950 (RD/), IEC 60950 IEC 61000-4-2/-3/-4/-5/-6/-8/-11, IEC 61000-3-2/-3,FCC Part 15, CISPR 22, EN 50091-2/IEC62040-2 Class A, EN 55022/B,FCC 47 part 15 – Subpart B – ISO 9001 ISO 14001 certified company CE, TUV/GS, UL, cUL, c-Tick
The APC 1600VA BX1600MI 900W UPS provides reliable backup power for home and office electronics. First, it delivers line-interactive output to protect devices from voltage fluctuations. In addition, it safeguards connected equipment from surges, spikes, and short outages. Moreover, the compact design allows easy placement near computers or servers. Finally, the LCD indicators display battery and load status for real-time monitoring. The BX1600MI-GR ensures uninterrupted operation and reliable protection for critical devices. manufacturer link Specifications: 900W / 1600VA line-interactive output for reliable device protection Protects electronics from power surges, spikes, and outages Compact design for easy placement near computers or servers LCD indicators for monitoring battery and load status Ensures uninterrupted operation during power interruptions
Features • Advanced DSP and 3-level technology • Output power factor 1.0 • Active power factor correction (APFC), input power factor up to 0.99 • High efficiency 95% (up to 98% in ECO mode) • Advanced digital parallel technology • Wide input voltage range (11 0 – 288 Vac) and frequency range (40 -70Hz) • 50 I 60 Hz frequency auto sensing • Two modes of frequency conversion: 50 Hz input I 60 Hz output or 60 Hz input I 50 Hz output • Dual-input design, supporting independent bypass • Flexible battery configuration (settable 16-20 pes batteries) • Digitally controlled charger • High charging current available (Max. 12 A) • Charging voltage and current configured by demands • Linear derating in low voltage input reducing battery discharging times, extending the service life of battery • Intelligent battery management, automatic floating I equalizing charge control, charger dormancy control, increasing battery life by 50%• Ability to switch on the UPS with batteries • Settable delayed start time when mains power is restored, reducing the impact on power grid or generator • Fan speed varies intelligently with temperature, reducing noise and extending its service life • Equipped with self-aging function • Compact internal layout, miniaturized the complete unit for small footprint • LCD+LED display, multi-functional keys operation, friendly human-machine interface • Powerful background software for parameters configuration • Advanced multi-platform communications: RS232, USB, RS485, SNMP and dry contacts communication interfaces • Effective software and hardware protection function, robust self-diagnostic function, and abundant event log for check Available Options • RS232 and smart card slot included • Optional parallel function, battery temperature compensation, SNMP card, USB, RS485 card, dry contacts, EMD, and SMS alarms Rear Panel 1. RS232 2. EPO 3. Parallel Port (optional) 4. USB (optional) 5. Temperature Detection (optional) 6. Intelligent Slot 7. Reserved: for manual bypass or battery breaker or outlets ect. 8.Fans 9. Bypass Breaker 10. Input Breaker 11.GND 12.Terminals and Cover http://en.eastups.com/EA900G4610kVA/6754.jhtml
APC Easy UPS On-Line SRV 3000VA 230V SRV3KI is a high-performance uninterruptible power supply designed to provide continuous power protection for servers, network equipment, data centers, and critical business systems. It uses true online double-conversion technology to deliver clean and stable power in demanding environments. The UPS provides 3000VA / 2400W power capacity. Therefore, it can support critical equipment during power outages, voltage fluctuations, and electrical disturbances. In addition, it helps maintain business continuity and equipment reliability. It features online double-conversion technology that continuously conditions incoming power. As a result, connected devices receive consistent and clean power regardless of utility power quality. The unit includes an LCD display for real-time monitoring and system management. Meanwhile, automatic bypass functionality helps maintain power delivery during specific operating conditions and maintenance events. APC designs the Easy UPS On-Line series for dependable power protection and efficient operation. Therefore, this model is ideal for servers, network infrastructure, security systems, and mission-critical applications. manufacturer link Specifications: 3000VA / 2400W power capacity Online double-conversion technology Pure sine wave output LCD status and monitoring display Reliable backup for critical systems
Powerology Portable Power Generator,140400mAh Powerology 140400mAh Power Generator 500W Pure Sine-Wave Output -45W USB-C Power Delivery -18W USB-A Quick Charge -3.1A Dual USB Optimal Charge -220V UK AC Output -750W Max Surge
INVO Online INH300 Centralized server center, mainframe, network control center, computing center Full Specifications : 3KVA 2100 W Half -Load 120 -300VAC, Full -Load 165V -300VAC 45.5Hz ~ 54.5Hz 220/230/240V ± 3% Waveform True Sine wave Frequency 50/60Hz ± 0.5 Distortion <3%(linear Load); <5%(Non -linear Load) Crest Factor 3:1 Efficiency 85% Overload Capacity 110%-150%:Switch to Bypass after 1min; >150%:Shutdown afte r 200ms Short Circuit UPS output turn off and alarm RS232 ;SNMP (Optional) LCD & LED Utility, Inverter, Bypass, Battery, Load ,Battery Mode ,Frequency , UPS Fault Indicator Audible Alarm -Battery Discharge Utility Failure, Beep/4s;Battery Low, Beep/1s UPS Abnornmal Continuous Beep and Red Led On Noise <55db (1Meter) Temperature 0°C~40°C Humidity 10%~90% Optional 19 inch Rack -mount Dimension (W * D * H) mm 357 x 144 x 215 439x190x341 514X262X455 (Long Time Mode) 514x262x710 (Standard Model) Specifications: Specifications : INVO Online UPS High Frequency 3000 VA, LCD Display Inbuilt Battery 6 x 12V/7Ah AC Input 2. Bypass 3. AC Output 4. Battery 5. Fault 6. Screen 9. LCD 1. AC Input 2. Bypass 3. AC Output 4. Battery 5. Fault 6. Screen 9. LCD 1 year warranty Manufacturer Link
APC UPS Accessories SURTRK APC Smart-UPS RT 19″ Rail Kit 1 – 2.2KVA
Key Features Output Connections (1) IEC 60320 C19 Input Connections Schuko CEE 7 / EU1-16P Cord Length 8.2ft (2.5meters) Power Cord, C19 to CEE/7 Schuko, 2.5m Wide selection of Rack PDU power cords for a variety of IT equipment. Specifications : Output Overload Protection No Maximum Total Current Draw 16 Input Input frequency 50/60 Hz Acceptable Input Voltage 90 – 250VAC Number of Power Cords 1 Maximum Input Current 16A Maximum Line Current 16A Physical Net Weight 0.49lbs. (0.22KG) Shipping weight 0.66lbs. (0.3KG) Shipping Height 2.01inches (51MM, 5.1CM) Shipping Width 4.02inches (102MM, 10.2CM) Shipping Depth 7.99inches (203MM, 20.3CM) Color Black Environmental Operating Temperature 32 – 113 °F (0 – 45 °C) Operating Relative Humidity 0 – 95 % Operating Elevation 0 – 10000ft (0 – 3048meters) Storage Temperature -25 – 65 °C Storage Relative Humidity 0 – 95 % Storage Elevation 0 – 50000ft (0 – 15240meters) manufacturer link
Eaton 5S UPS, 1500 VA, 900 W, Input: C14, Outputs: (4) C13, (4) C13 surge only, Tower General Topology Line-Interactive (AVR with Booster + Fader) Configuration Tower or under monitor Part Number 5S1500i Color Black Rating (VA/Watts) 1500/900 Dimensions (H x W x D, mm) 250 x 87 x 382 Weight (kg) 11.08 Electrical Input Connection (1) IEC-320-C14 Input Voltage Range 175V-275 V Nominal Voltage 230 V Operating Frequency 50-60 Hz autoselect Electrical Output Nominal Voltage 230 VAC Output voltage regulation 230 V +/- 10% Outlets (4) IEC-320-C13 (4) IEC-320-C13 surge only Communications Communication Ports HID-compliant USB port for automatic integration with most common operating systems (Windows Vista, 7 & 8, Linux, Mac OS X), cable supplied Environmental & Standards Audible Noise < 40 dB at 1 Meter Operating Temperature 0 to 40°C Safety markings IEC/EN 62040-1, IEC/EN 62040 -5 Markings CB Report, CE mark Data Line Protection Tel/Fax/Modem/Internet and Ethernet 2 Years Warranty manufacturer link
The PCE PCD 12V 100Ah Deep Cycle Battery delivers strong and reliable power for many applications. It offers a larger 100Ah capacity for extended use. This helps engines, systems, and devices run longer between charges. Users experience dependable energy when needed most. Moreover, the PCE PCD Deep Cycle Battery uses a deep cycle design built for repeated discharge and recharge. It supports long-term use without damage. This increases the battery’s lifespan and reduces replacements. Performance remains consistent over time. In addition, the battery provides a stable 12 V output for balanced power delivery. It suits solar systems, RVs, marine setups, and backup power solutions. Power stays steady for lights and appliances. Daily use becomes more efficient. Furthermore, the PCE PCD 12V 100Ah Deep Cycle Battery features a rugged casing that protects internal cells. The strong build resists wear and harsh conditions. This helps maintain performance in many environments. Durability feels reassuring. Also, the battery supports deep discharge recovery for long service life. It recovers well after heavy use cycles. This improves energy storage and reliability. Users rely on strong power anytime. In addition, the PCE PCD Deep Cycle Battery is easy to install in compatible racks and holders. Connections stay secure and simple. Setup feels user-friendly for both beginners and professionals. Installation remains smooth. Furthermore, the PCE PCD Deep Cycle Battery performs steadily across varying temperatures. It stays reliable in moderate heat and cold. This makes it ideal for outdoor and mobile use. Overall, the PCE PCD 12V 100Ah Deep Cycle Battery delivers dependable power, long life, and robust performance. It fits homes, boats, RVs, and solar systems. This battery is perfect for users who want strong, lasting deep cycle energy every day. Specifications: Voltage : 12V Capacity : 100Ah
Features • Advanced DSP and 3-level technology • Output power factor 1.0 • Active power factor correction (APFC), input power factor up to 0.99 • High efficiency 95% (up to 98% in ECO mode) • Advanced digital parallel technology • Wide input voltage range (11 0 – 288 Vac) and frequency range (40 -70Hz) • 50 I 60 Hz frequency auto sensing • Two modes of frequency conversion: 50 Hz input I 60 Hz output or 60 Hz input I 50 Hz output • Dual-input design, supporting independent bypass • Flexible battery configuration (settable 16-20 pes batteries) • Digitally controlled charger • High charging current available (Max. 12 A) • Charging voltage and current configured by demands • Linear derating in low voltage input reducing battery discharging times, extending the service life of battery • Intelligent battery management, automatic floating I equalizing charge control, charger dormancy control, increasing battery life by 50% • Ability to switch on the UPS with batteries • Settable delayed start time when mains power is restored, reducing the impact on power grid or generator • Fan speed varies intelligently with temperature, reducing noise and extending its service life • Equipped with self-aging function • Compact internal layout, miniaturized the complete unit for small footprint • LCD+LED display, multi-functional keys operation, friendly human-machine interface • Powerful background software for parameters configuration • Advanced multi-platform communications: RS232, USB, RS485, SNMP and dry contacts communication interfaces • Effective software and hardware protection function, robust self-diagnostic function, and abundant event log for check Available Options • RS232 and smart card slot included • Optional parallel function, battery temperature compensation, SNMP card, USB, RS485 card, dry contacts, EMD, and SMS alarms Specifications Voltage range OUTPUT Output wiring Rated voltage Voltage regulation Frequency Waveform Power factor Total harmonic distortion (THDv) Crest factor Overload BATTERIES DC voltage Number of battery lnbuilt battery (standard model) Charging current Recharge time EM Efficiency Transfer time Protections Max. number of parallel connections Communications Display OTHERS Operating temperature Storage temperature Relative humidity Altitude !Prating Noise level at 1 m Dimensions (W x D x H) (mm) Packaged dimensions (W x D x H) (mm) Net weight (kg) Gross weight (kg) 110- 176 Vac (linear derating between 50% and 100% load); 176- 288 Vac (no derating) Single-phase three-wire (1 Cll + N + PE) 208 (PF=0.9) 1220 1230 1240 Vac ± 1% Synchronized to bypass in mains mode; 50 160 Hz±0.1% Hz in battery mode Sinusoidal 1 s 1% (linear load); s 4% (non-linear load) 3:1 105%- 110% for 10 min, 110%- 125% for 1 min, 126%- 150% for 30 s 192 Vdc (192- 240 Vdc settable) 16 pes (16- 20 settable) 12VI7Ahx16 I 12VI9Ahx16 Standard model: 1 A; Long time model: 5A(default), 1 – 5Asettable, 12A (optional) Standard model: 90% capacity restored in 8 hours; Long time model: depend on the capacity of battery ~ 94% at 100% load, max. 95% at 60% load,~ 98% in ECO mode Oms Short-circuit, overload, overtemperature, battery low voltage, overvoltage, undervoltage and fan failure 4 RS232 (standard), USB I RS4851 dry contacts I SNMP I baltery temperature compensation (optional) LCD+ LED O”C – 40″C -25″C – 55″C (without battery) 0 – 95% (non-condensing) s 1 000 m, derating 1% for each additional 1 00 m IP20 S55dB S58dB 191 X 465 X 711 (S), 191 X 465 X 350 (H) 191 X 495 X 711 (S), 191 X 495 X 350 (H) 310 X 654 X 941 (S), 318 X 595 X 475 (H) 310 X 685 X 941 (S), 318 X 617 X 475 (H) 53 (S), 14.5 (H) 62 (S), 16.5 (H) 61 (S), 16 (H) 70 (S), 18 (H)
9E20Ki Eaton Online Double Conversion 9E 20KVA / 16000W Combo: 1:1 and 3:1, In-Built Automatic Relay Bypass, Intelligent Power Software, 1 USB port + 1 RS232 serial port (USB and RS232 ports cannot be used simultaneously), 1 slot for Network-MS, ModBus-MS or Relay-MS cards, 1 Year Warranty
APC UPS Accessories SMX48RMBP2U APC Smart-UPS X-Series 48V External Battery Pack Rack/Tower for SMX1000, SMX1500, SMX750
The Twist Line Interactive UPS 850VA TWUP850/LI provides backup power protection for computers, networking devices, and office electronics. It uses line interactive technology with automatic voltage regulation for stable power delivery. Additionally, the built-in 12V/7Ah battery supports continued operation during power interruptions. Moreover, the UPS includes LED status indicators for clear system monitoring. It also supports cold start functionality for startup without direct AC power. Therefore, it helps protect connected devices from voltage fluctuations and sudden outages. Furthermore, the compact tower design fits easily in home and office environments. The system also includes overload and short-circuit protection for safer daily operation. Additionally, the simulated sine wave output supports common desktop and networking equipment. Specifications: 850VA line interactive UPS technology Built-in 1x12V/7Ah rechargeable battery LED indicators for power status monitoring Automatic voltage regulation for stable output Overload and short-circuit protection system
UPS PCE EXDC-2 MAX UPS Adapter for Cameras & Modems
