Hardware Specifications Interfaces LAN 2 x 10/100/1000BASE-T RJ45 port Auto-negotiation and auto MDI/MDI-X Antennas Gain: 4 x Internal 4dBi antenna (2.4G x2, 5G x2) Reset Button Reset button on the rear side (Press over 5 seconds to reset the device to factory default) LED Indicators Power, SYS Dimensions (W x D x H) 186 x 186 x 35.8 mm Weight 380 ± 5g Power Requirements 48V DC IN, 0.5A, IEEE 802.3at PoE+ (WAN/PoE were changed port) 12V DC IN, 2.0A from DC Jack (5.5 x 2.1mm) Power Consumption < 15W Mounting Ceiling Mount Wireless Interface Specifications Standard IEEE 802.11ax IEEE 802.11ac IEEE 802.11n IEEE 802.11a IEEE 802.11b IEEE 802.11g IEEE 802.11i IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX IEEE 802.3ab 1000BASE-T IEEE 802.3x flow control IEEE 802.11k, 802.11v, and 802.11r Media Access Control CSMA/CA Data Modulation 802.11ax: MIMO-OFDMA (BPSK / QPSK / 16QAM / 64QAM / 256QAM, 1024QAM) 802.11ac: MIMO-OFDM (BPSK / QPSK / 16QAM / 64QAM / 256QAM) 802.11a/g/n: OFDM (BPSK / QPSK / 16QAM / 64QAM) 802.11b: DSSS (DBPSK / DQPSK / CCK) Band Mode 2.4GHz / 5GHz concurrent mode Frequency Range 2.4GHz: FCC: 2.412~2.462GHz ETSI: 2.412~2.472GHz 5GHz: FCC: 5.180~5.240GHz, 5.745~5.825GHz ETSI: 5.180~5.700GHz Operating Channels ETSI: 2.4GHz: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13 (13 Channels) 5GHz: 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120,124,128,132, 136, 140 (19 Channels) FCC: 2.4GHz: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11 (11 Channels) 5GHz: 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116,120,124,128,132, 136, 140, 149, 153, 157,161,165 (24Channels) 5GHz channel list may vary in different countries according to their regulations. Max. Transmit Power (dBm) FCC: up to 20 ± 1dBm ETSI: < 19dBm (EIRP) Receive Sensitivity Software Features LAN Static IP / *Dynamic IP WAN Static IP Dynamic IP PPPoE/PPTP/L2TP Wireless Mode Access Point Gateway Repeater Channel Width 20MHz, 40MHz, 80MHz Encryption Security WPA3 Personal, WPA2/WPA3 Personal, WPA2 Personal (AES), WPA2 Personal (TKIP), WPA2 Personal (TKIP+AES), WPA/WPA2 Personal (AES), WPA/WPA2 Personal (TKIP), WPA/WPA2 Personal (TKIP+AES), WPA2 Enterprise, WPA/WPA2 Enterprise Wireless Security Enable/Disable SSID Broadcast Wireless Max. 32 MAC address filtering User Isolation Max. SSIDs 8 (4 per radio) Max. Clients 150 (100 is suggested, depending on usage) Wireless QoS Supports Wi-Fi Multimedia (WMM) Wireless Advanced Auto Channel Selection 5-level Transmit Power Control Max (100%), Efficient (75%), Enhanced (50%), Standard (25%) or Min (15%) Client Limit Control, Coverage Threshold *Wi-Fi channel analysis chart Seamless Roaming Beamforming BSS Coloring Status Monitoring Device status, wireless client List PLANET Smart Discovery *DHCP client table System Log supports remote syslog server VLAN *IEEE 802.1Q VLAN (VID: 1~4094) *SSID-to-VLAN mapping to up to 4 SSIDs Self-healing Supports auto reboot settings per day/hour Management Remote management through PLANET DDNS/ Easy DDNS Configuration backup and restore Supports UPnP Supports IGMP Proxy Supports PPTP/L2TP/IPSec VPN Pass-through Supports Captive Portal, RADIUS Server/Client Central Management Applicable controllers: NMS-500, NMS-1000V, *PLANET CloudViewer Environment & Certification Temperature Operating: -20~ 55 degrees C Storage: -40 ~ 70 degrees C Humidity Operating: 10 ~ 90% (non-condensing) Storage: 5 ~ 90% (non-condensing) Regulatory CE, RoHS Remarks [*]: The feature will be supported through firmware/system upgrade. 1 Year Warranty manufacturer link
The TP‑Link JetStream 52‑Port Gigabit L2+ Managed Switch with 48‑Port PoE+ provides robust networking for business and enterprise environments. It supports 48 PoE+ Gigabit ports with a total 384 W power budget, allowing simultaneous power and data transmission to devices such as IP cameras, phones, and access points. Therefore, it simplifies cable management and device deployment in large networks. Furthermore, the switch includes four Gigabit SFP slots for high‑speed fiber uplinks and reliable connectivity. Managed L2+ and L3 features help optimize traffic with static routing, link aggregation, and advanced QoS controls. In addition, strong security strategies such as ACLs and storm control help protect network resources. Moreover, centralized cloud management is supported through the Omada SDN platform, allowing you to control and monitor multiple devices from a single interface. The switch also supports standalone management via web GUI, CLI, SNMP, and RMON for flexible administration. As a result, JetStream TL‑SG3452P enhances network efficiency and scalability for offices, campuses, and enterprise networks. Specifications: 48 PoE+ Gigabit RJ45 ports with 384 W total PoE budget Four Gigabit SFP uplink slots for fiber connectivity L2+ and L3 switching with static routing and advanced QoS Centralized Omada cloud management and flexible administration options Robust security strategies including ACL, storm control, and authentication
The DES-105 5-Port Fast Ethernet Unmanaged Desktop Switch is a 5-port 10/100 Mbps Fast Ethernet switch that allows you to quickly set up a wired network. Connect the DES-105 to multiple computers together to share files and folders, or connect it to a router to share an Internet connection. DES-105/E 2 years warranty
TP-Link Archer T3U Nano is an AC1300 USB wireless adapter that adds fast Wi‑Fi to laptops and desktops. It provides dual-band performance and a compact design for everyday use. The adapter delivers combined speeds up to AC1300. Users benefit from smooth browsing, streaming, and online tasks. It works on both 2.4 GHz and 5 GHz bands for flexible network performance. Its nano USB design is small and convenient. You can leave it plugged in without blocking other ports or worrying about damage. Installation is simple with plug-and-play support. Users can quickly enable Wi-Fi connectivity without complicated setup. In conclusion, TP-Link Archer T3U Nano USB Adapter offers reliable dual-band Wi-Fi, compact size, and easy installation for home or office use. Specifications: Interface : USB 2.0 Wi-Fi Speed : 2.4GHz, 5GHz Wireless Security : WEP, WPA/WPA2/WPA3, WPA-PSK/ WPA2-PSK, WPA3-SAE
The PROLINK PIC1010WP Wireless IP Camera is designed to provide flexible indoor surveillance with wireless connectivity, remote monitoring, and smart recording features. It allows users to monitor homes, offices, and other spaces through compatible devices. The camera features a high-definition dual-lens design with pan and tilt control for wider area coverage. Additionally, the remote pan and tilt function allows users to adjust the viewing direction and monitor different areas without physically moving the camera. The PROLINK PIC1010WP supports HD video recording with resolutions up to 1280 × 800 and uses H.264 video compression for efficient video storage and streaming. Moreover, it supports separate video settings for different viewing devices. The camera includes 2.4GHz Wi-Fi connectivity and also supports wired network connection through an RJ45 Ethernet port. Furthermore, the wireless setup supports WEP and WPA/WPA2 security modes for network protection. The PROLINK PIC1010WP includes day and night monitoring with separate sensors and infrared LED support for low-light environments. In addition, the built-in microphone and speaker provide two-way audio communication. The camera supports local recording through an SD card and also works with NAS and cloud storage options. Therefore, users can store recorded footage and review important events when needed. Motion and sound detection features allow the camera to send notifications when activity is detected. Moreover, the plug-and-play setup makes installation easier for home and office users. The PROLINK PIC1010WP combines wireless monitoring, pan and tilt control, recording options, and two-way audio in a compact security solution. As a result, it provides a practical option for users who need flexible surveillance capabilities. Specifications: Resolution: Up to 1280 × 800 HD video Sensor: RGB Mega 1/4-inch CMOS sensor Connectivity: 2.4GHz Wi-Fi and RJ45 Ethernet Lens: 3.3mm fixed lens, 70° viewing angle Storage: SD card, NAS, and Dropbox recording support
Apple USB-C to Lightning Cable (1m) - With Apple Warranty Apple USB-C to Lightning Cable (1m) – With Apple Warranty Connect your iPhone, iPad or iPod with Lightning connector to your USB-C– or Thunderbolt 3 (USB-C)–enabled Mac for syncing and charging, or to your USB-C–enabled iPad for charging. You can also use this cable with your Apple 18W, 20W, 29W, 30W, 61W, 87W or 96W USB‑C Power Adapter to charge your iOS device and even take advantage of the fast-charging feature on selected iPhone and iPad models.
The Eaton 5E Gen2 UPS 700VA 360W provides reliable power backup for your electronic devices. It’s designed to protect your equipment from unexpected power outages, surges, and voltage fluctuations, ensuring uninterrupted performance. With a 700VA/360W capacity, the Eaton 5E UPS is perfect for safeguarding your home office devices, including computers, routers, and modems. It ensures that your critical systems stay operational when you need them the most. The compact design of the Eaton 5E UPS makes it a great fit for small spaces. Its lightweight and slim profile allows it to be easily placed under a desk or on a shelf, providing protection without taking up much space. This UPS features automatic voltage regulation (AVR), which stabilizes power levels to protect your equipment from voltage spikes. This ensures your devices run smoothly, even when power conditions are unstable. Setting up the Eaton 5E Gen2 UPS is simple and hassle-free. It comes with multiple outlets to connect your essential devices, giving you peace of mind during power interruptions. With an efficient battery backup system, the Eaton 5E UPS offers enough time to safely shut down your devices or switch to an alternative power source. This minimizes the risk of data loss or equipment damage. In conclusion, the Eaton 5E Gen2 UPS 700VA 360W is a cost-effective and reliable solution for protecting your electronic devices from power disruptions. Invest in the Eaton 5E Gen2 today and ensure continuous power for your essential equipment. Specifications: Rating : 700VA 360W Technology : Line Interactive Connection : 2 Outlets
Ideal for on-the-go professionals with a compact, foldable, 360° swivel design 1080p HD quality in a compact form factor Folds for grab-and-go convenience 360° swivel so you can point in any direction
Fantech MP35 Medium Size: 35cmx25cmx0.4cm High Non-Slip Base Gaming Mouse Pad Speed-Type Surfaces Natural Rubber Material Is Non -Toxic Premium Material Waterproof Coating Edge-Stitching 1 Year Warranty manufacturer link
The MSI MPG Z890 Edge Ti WiFi DDR5 Motherboard | 911-7E19-004 is a high-end ATX motherboard built for Intel Core Ultra processors (LGA 1851). It is designed for gaming performance, AI workloads, and high-speed system builds. Additionally, it supports DDR5 memory with overclocking speeds up to 9200+ MT/s, depending on configuration. The board includes four DIMM slots with a maximum capacity of up to 256GB. Moreover, it features PCIe 5.0 support for next-generation GPUs and SSDs. It also includes multiple M.2 slots for fast NVMe storage expansion and thermal shielding for stability. Furthermore, it offers WiFi 7, 5G LAN, and Thunderbolt 4 connectivity for ultra-fast networking and device communication. The advanced VRM design ensures stable power delivery for high-performance CPUs. Therefore, the MSI MPG Z890 Edge Ti WiFi DDR5 Motherboard delivers extreme performance, advanced connectivity, and strong upgrade flexibility for modern PC builds. Specifications: Intel LGA 1851 support for Core Ultra processors DDR5 memory up to 256GB and 9200+ MT/s OC PCIe 5.0 support for GPU and storage expansion WiFi 7 and 5G LAN for ultra-fast networking Thunderbolt 4 and multiple M.2 storage slots