【2021 New 60W PD Version】This well-rececived large power bank is now back with 2 high-speed USB-C PD ports to refresh your portable charging experience. USB-C (1) port can transfer up to 60W power to your laptop while USB-C (2) port can keep your phones charged at a maximum speed of Max. 27W on the go. 【Massive Capacity】Packed with a enormous capacity of 72000mAh/266Wh as well as battery management system, this portable charger can pump out enough power to multiple devices simultaneously and securely at a high power conversion rate up to 90%. (Note: not TSA-approved, not allowed on a plane) 【Off-Grid Power for CPAP】The high-performing DC 12V/5A (150W max.) cigarette lighter port is ready to boost most CPAP machines on the market with a CPAP adapter (PURCHASED SEPARATELY), including Philips Dreamstation, Resmed Airsense/Aircurve 10, and Resmed S9. Please turn OFF the heater & the humidifier for extended runtime. 【Faster Recharging】Recharge the battery pack at full-speed via a solar panel with the two-way DC port in 3-4 hours, and the two-way USB-C (1) port in 5-6 hours. Please note that the USB-C (1) port and the DC port CANNOT be used at the same time. 【10W Wireless Charging】Align your smartphone to the charging pad to get rid of cords jumbled in your bag. The smart indicator allows you to keep taps on real-time charging status effortlessly. DOES NOT support wireless earbuds, smartwatches, and other low-power devices. https://www.renogy.com/content/files/Manuals/RC-P72000-01%202018.3.23.pdf
Features • Advanced DSP and 3-level technology • Output power factor 1.0 • Active power factor correction (APFC), input power factor up to 0.99 • High efficiency 95% (up to 98% in ECO mode) • Advanced digital parallel technology • Wide input voltage range (11 0 – 288 Vac) and frequency range (40 -70Hz) • 50 I 60 Hz frequency auto sensing • Two modes of frequency conversion: 50 Hz input I 60 Hz output or 60 Hz input I 50 Hz output • Dual-input design, supporting independent bypass • Flexible battery configuration (settable 16-20 pes batteries) • Digitally controlled charger • High charging current available (Max. 12 A) • Charging voltage and current configured by demands • Linear derating in low voltage input reducing battery discharging times, extending the service life of battery • Intelligent battery management, automatic floating I equalizing charge control, charger dormancy control, increasing battery life by 50%• Ability to switch on the UPS with batteries • Settable delayed start time when mains power is restored, reducing the impact on power grid or generator • Fan speed varies intelligently with temperature, reducing noise and extending its service life • Equipped with self-aging function • Compact internal layout, miniaturized the complete unit for small footprint • LCD+LED display, multi-functional keys operation, friendly human-machine interface • Powerful background software for parameters configuration • Advanced multi-platform communications: RS232, USB, RS485, SNMP and dry contacts communication interfaces • Effective software and hardware protection function, robust self-diagnostic function, and abundant event log for check Available Options • RS232 and smart card slot included • Optional parallel function, battery temperature compensation, SNMP card, USB, RS485 card, dry contacts, EMD, and SMS alarms Rear Panel 1. RS232 2. EPO 3. Parallel Port (optional) 4. USB (optional) 5. Temperature Detection (optional) 6. Intelligent Slot 7. Reserved: for manual bypass or battery breaker or outlets ect. 8.Fans 9. Bypass Breaker 10. Input Breaker 11.GND 12.Terminals and Cover http://en.eastups.com/EA900G4610kVA/6754.jhtml
The Eaton 9E UPS Online Double Conversion 6000VA 4800W is a powerful and reliable power backup solution. It ensures uninterrupted power for critical devices, protecting them from outages and fluctuations. This UPS uses advanced double-conversion technology for maximum power reliability. It provides consistent and clean power, making it perfect for sensitive equipment like servers, medical devices, and data centers. The Eaton 9E UPS delivers 6000VA (4800W) of capacity, making it suitable for high-load environments. Its robust design ensures consistent performance even during extended power outages. This makes it ideal for businesses that cannot afford downtime. Setting up the UPS is simple, and it integrates seamlessly into existing systems. It comes with an intuitive LCD interface, making monitoring and management straightforward. You can easily view critical information, such as load levels, battery status, and alerts. The Eaton 9E UPS also features a scalable runtime. You can add additional battery modules to extend backup time as your needs grow. This flexibility ensures long-term usability and value. With its compact footprint, the UPS saves space in your office or server room. Its energy-efficient design reduces operating costs while ensuring reliable performance. This UPS is equipped with advanced features, such as remote monitoring capabilities. Using Eaton’s management software, you can monitor and control the UPS from anywhere. The Eaton 9E UPS Online Double Conversion 6000VA 4800W is a reliable investment for protecting your critical systems. Ensure uninterrupted power for your business with this advanced and efficient UPS solution. Specifications: Wattage : 4800W VA Rating : 6000 VA
INVO online INH1000 NVO Online UPS High Frequency 10000 VA, LCD Display Inbuilt Battery 16 x 12V/9 Ah Specifications: Specifications : AC Input Bypass AC Output Battery Fault Screen LCD AC Input Bypass AC Output Battery Fault Screen LCD 1 year warranty Manufacturer Link
The APC 1600VA BX1600MI 900W UPS provides reliable backup power for home and office electronics. First, it delivers line-interactive output to protect devices from voltage fluctuations. In addition, it safeguards connected equipment from surges, spikes, and short outages. Moreover, the compact design allows easy placement near computers or servers. Finally, the LCD indicators display battery and load status for real-time monitoring. The BX1600MI-GR ensures uninterrupted operation and reliable protection for critical devices. manufacturer link Specifications: 900W / 1600VA line-interactive output for reliable device protection Protects electronics from power surges, spikes, and outages Compact design for easy placement near computers or servers LCD indicators for monitoring battery and load status Ensures uninterrupted operation during power interruptions
Specifications : Professional II Series (1P/1P) Tower is specifically designed for operation in poor power areas. They provides high power density with long backup time in compact size. It’s ideal for ATMs, banking and other business critical applications. – True double-conversion – Microprocessor control optimizes reliability – Output power factor 0.8 – Wide input voltage (110 V – 300 V) – Converter mode available – ECO mode for energy saving – Generator compatible – Smart SNMP works well with either USB or RS-232 together – Comprehensive display allows easy monitoring and access of UPS status – Input power factor correction manufacturer link
Powerology Portable Power Generator,140400mAh Powerology 140400mAh Power Generator 500W Pure Sine-Wave Output -45W USB-C Power Delivery -18W USB-A Quick Charge -3.1A Dual USB Optimal Charge -220V UK AC Output -750W Max Surge
Specifications : Le grand ups keor spx 2kva 2000va 1200w ups 2kva 1 year warranty
PCE EX Online 2 KVA 1800W is a double-conversion online UPS designed to deliver continuous and stable power protection for computers, servers, and sensitive electronic equipment. It ensures uninterrupted operation during outages and unstable voltage conditions. In addition, PCE EX Online 2 KVA 1800W uses true online double-conversion technology. Therefore, it provides zero transfer time between mains and battery mode. Moreover, it delivers a pure sine wave output for safe and stable power to connected devices. Furthermore, PCE EX Online 2 KVA 1800W supports a 2kVA / 1800W load capacity. As a result, it can handle multiple devices such as PCs, routers, and small servers. It also maintains stable voltage regulation for sensitive workloads. In addition, PCE EX Online 2 KVA 1800W includes advanced protection features. Therefore, it helps protect against overload, short circuits, and power fluctuations. Moreover, it is designed for consistent performance in professional and office environments. Overall, PCE EX Online 2 KVA 1800W delivers reliable, uninterrupted, and high-quality backup power for critical systems. Specifications: 2kVA / 1800W power capacity for multiple devices Online double-conversion UPS technology Zero transfer time for uninterrupted power Pure sine wave output for safe device operation Protection against overload and voltage fluctuations
The Prosonic 2000mAh MINI DC UPS | GS-1018 provides stable backup power for routers, modems, CCTV cameras, ONU devices, and other low-power networking equipment during electricity outages. Its compact design fits easily beside networking devices while maintaining reliable operation for home and office setups. This mini UPS supports multiple DC output options, making it suitable for different electronic devices that require continuous power. The built-in safety protections help prevent overheating, overload, overcharging, and short circuits, which improves long-term reliability and device safety. In addition, the lightweight body allows easy placement in small spaces without adding clutter to your setup. The unit delivers dependable backup support for internet connectivity during load shedding or sudden power interruptions. Users can connect routers and communication equipment directly to maintain stable online access for work, streaming, online classes, or security monitoring systems. Key operating features include efficient power conversion, portable dimensions, and compatibility with common DC-powered devices. The Prosonic GS-1018 also offers a practical solution for users who need uninterrupted networking performance without using a large traditional UPS system. Moreover, the compact battery backup system helps reduce downtime while protecting connected devices from sudden shutdowns. Its easy plug-and-play setup makes installation simple for both home and small business users. Specifications: 2000mAh backup battery capacity for networking devices Supports routers, CCTV cameras, modems, and ONU devices Multiple DC output options for wider compatibility Built-in overload, short circuit, and overcharge protection INPUT : 100-240Vac 50/60Hz OUTPUT : 5V/9V/12V/USB port/POE port
Specifications : GENERAL UPS Type : Tower Phase : Single phase with ground Rating (VA) : 2000 Nominal Power (W) : 1600 Standard Model Dimension (mm) : 397x 145 x 220 (D x W x H) Weight (kg) : 17 Long-run Model Dimension (mm) : 397 x 145 x 220 (D x W x H) Weight (kg) : 6.8 INPUT Connection Type : IEC 320-C14 Nominal Voltage : 200/208/220/230/240 VAC Voltage Range : 110-300 VAC (Load at 50%) 160-280 VAC (Load at 100%) Frequency Range : 45 ~ 70 Hz Power Factor : >= 0.99 OUTPUT Connection Type : 3 x Universal socket (PRO902WS) 2 x Universal socket (PRO902WL) Nominal Voltage : 200/208/220/230/240 VAC Voltage Regulation : ±1% Frequency Range (Synchronized Range) : 47 ~ 53 Hz or 57 ~ 63 Hz Frequency Range (Batt. Mode) : 50 Hz ± 0.25 Hz or 60 Hz ± 0.3 Hz Current Crest Ratio : 3:1 Harmonic Distortion ; ≤3% THD (Linear load) ≤6% THD (Non-linear load) ALARM & INDICATORS Battery Mode : Sounding every 4 seconds Low Battery : Sounding every second Overload : Sounding twice every second Fault : Continuously sounding LCD : Load level, Battery Level, AC mode, Battery mode, Bypass mode and Fault CONNECTIVITY, CONTROL & MONITORING Front panel : Status LED, Function keys, LCD display Communication : Smart RS232* USB : Port BATTERY Standard Model Type : 12V / 9Ah Numbers : 4 Typical Recharge Time : 4 hours recover to 90% capacity Long-run Model Type : Depending on the capacity of external batteries Number : 4/6/8 Charging Current (max) : 1A / 2A / 4A / 6A Adjustable REAR PANEL 1. AC Input 2. Input circuit breaker 3. USB Communication port 4. RS-232 communication port 5. Intelligent slot 6. External battery connection (Only available for L model) 7. Output receptacles
Prolink PRO906WS 6KVA / 4800W Online UPS with AVR is a high-performance power backup solution designed for critical devices, servers, and sensitive electronics. It provides stable and continuous power protection against outages and voltage fluctuations. It features a 6000VA (4800W) capacity with pure sine wave output. Therefore, it ensures clean and reliable power delivery for computers, networking equipment, and industrial systems. In addition, it protects devices from sudden power loss and electrical damage. The UPS uses online double-conversion technology with built-in AVR (Automatic Voltage Regulation). As a result, it delivers consistent voltage output and improves equipment safety during unstable power conditions. It supports heavy-duty usage and long backup operation depending on load. Meanwhile, its robust design makes it suitable for business, IT infrastructure, and professional environments. Prolink designs its UPS systems for reliability and protection. Therefore, this model is an ideal choice for users who need uninterrupted and stable power supply for critical operations. manufacturer link Specifications: 6000VA / 4800W high capacity Pure sine wave output Online double-conversion UPS Built-in AVR voltage regulation Ideal for servers and critical systems
APC 800VA BX800LI 415W UPS (IEC Plug) APC 650VA BX650LI UPS
Prolink PRO3000SFCU 3000VA is a line-interactive UPS designed to provide stable backup power for PCs, servers, networking devices, and sensitive electronics. It ensures continuous operation during power cuts and voltage fluctuations. In addition, Prolink PRO3000SFCU 3000VA supports a wide input voltage range of 140–300VAC. Therefore, it stabilizes unstable electricity using automatic voltage regulation (AVR). Moreover, it delivers a fast transfer time of around 2ms for seamless switching between mains and battery mode. Furthermore, Prolink PRO3000SFCU 3000VA includes four 12V/10Ah batteries for extended backup support. As a result, it provides reliable runtime for critical systems depending on load. It also supports simulated sine wave output for compatible devices. In addition, Prolink PRO3000SFCU 3000VA features intelligent microprocessor control. Therefore, it improves efficiency, protection, and battery management. Moreover, it includes indicators and alarms for battery, overload, and fault conditions. Overall, Prolink PRO3000SFCU 3000VA delivers strong backup performance, stable voltage regulation, and reliable protection for home and office power needs. Specifications: 3000VA capacity for PCs and office equipment Line-interactive UPS with AVR voltage regulation Wide input range 140–300VAC for unstable power Fast ~2ms transfer time for uninterrupted switching Four 12V/10Ah batteries for extended backup support
The Beco GP1200 1200VA 720W UPS delivers reliable power backup for home and office electronics. It keeps key devices running during outages. This helps prevent data loss and sudden shutdowns. Users gain peace of mind knowing devices stay protected. Moreover, the Beco GP1200 1200VA 720W UPS features 1200 VA capacity and 720 W output power for strong support. It handles computers, routers, modems, and monitors easily. Large systems stay powered long enough to save work. Performance stays stable and secure. In addition, the UPS includes built-in surge protection for reliable defense against voltage spikes. It guards appliances from unstable power conditions and electrical surges. This adds extra safety during storms or fluctuations. Protection stays consistent over time. Furthermore, the Beco GP1200 1200VA 720W UPS offers automatic voltage regulation without manual settings. It smooths voltage drops and spikes quickly. This helps connected devices run smoothly. Reliability increases in daily use. Also, the UPS provides battery backup when power fails. You can finish tasks and save important files before turning off systems. This reduces the risk of data corruption. Backup power feels dependable. In addition, the Beco GP1200 1200VA 720W UPS includes clear LED indicators for power and battery status. You can check performance at a glance. This helps monitor conditions with ease. Users stay informed during operation. Moreover, the UPS includes multiple output sockets for connecting more devices at once. This improves flexibility for busy workstations and entertainment setups. You can protect multiple electronics with one unit. Furthermore, the Beco GP1200 1200VA 720W UPS supports easy installation and quick setup. Users can connect devices without complicated steps. Setup remains simple for all users. Also, the compact design fits neatly on desks, shelves, or cabinets without taking much room. It blends well into home and office spaces. Portability stays practical. Overall, the Beco GP1200 1200VA 720W UPS delivers strong battery backup, surge protection, and smooth voltage regulation. It guards electronics and ensures uninterrupted use. This UPS is ideal for users seeking reliable, everyday power protection. Specifications: 1200VA, 720W, LED, Plastic Case Input: 140-290 VAC Output: 230VAC 50/60HZ 12V 7.5AH *2pcs, Universal Socket *4 + EU Plug With AVR, Bypass output Overload and short circuit protection
APC UPS Accessories SMX48RMBP2U APC Smart-UPS X-Series 48V External Battery Pack Rack/Tower for SMX1000, SMX1500, SMX750
The APC Easy UPS 1200W / 2200VA BX2200MI-MS provides reliable backup power for critical devices. First, it delivers line-interactive output to protect equipment from voltage fluctuations. In addition, it safeguards connected electronics against surges, spikes, and short outages. Moreover, the UPS features a compact design for easy installation in offices or home setups. Finally, the LCD panel allows real-time monitoring of battery and load status. The BX2200MI-MS ensures uninterrupted operation and protects essential systems during power interruptions. manufacturer link Specifications: 1200W / 2200VA line-interactive output for reliable device protection Protects electronics from surges, spikes, and outages Compact design suitable for office or home setups LCD panel for monitoring battery and load status Ensures uninterrupted operation during power interruptions
MARSRIVA SMART MINI DC UPS 10000MAH Capacity: 10000mAh / 37Wh. Output Interface: USB-A Output: 5V at 2.4A, DC Output: 5V / 9V / 12V (selectable) at 1.5A, POE Output: 5V at 2.4A. Dimensions: 104.5 x 170 x 30.8 mm. Net Weight: 360g. Color: Black. Specifications: MARSRIVA SMART MINI DC UPS 10000MAH Capacity: 10000mAh / 37Wh. Output Interface: USB-A Output: 5V at 2.4A, DC Output: 5V / 9V / 12V (selectable) at 1.5A, POE Output: 5V at 2.4A. Dimensions: 104.5 x 170 x 30.8 mm. Net Weight: 360g. Color: White.
MGE Eaton 5E Essential Plus 5E2000iUSB 2000VA UPS w/ Power Management USB Port
The Twist Online High Frequency UPS 2KVA TWUP2000/HF provides continuous backup power for servers, workstations, and networking equipment. It uses online double conversion technology for stable and clean power delivery. Additionally, the high-frequency design improves efficiency and reduces transfer interruptions. Moreover, the UPS includes an LCD display for real-time monitoring and system alerts. It also features internal 4x12V/9Ah batteries for backup operation during outages. Therefore, it protects connected devices from voltage fluctuations, overloads, and power failures. Furthermore, the TWUP2000/HF supports pure sine wave output for sensitive electronics and professional equipment. It also includes overload, short-circuit, and surge protection for safer operation. Additionally, the compact tower design fits office, server room, and IT environments easily. Specifications: 2KVA online double conversion UPS technology Internal 4x12V/9Ah rechargeable batteries LCD display for real-time monitoring Pure sine wave output for stable power delivery Overload and short-circuit protection system
Legrand Ups Keor SPX Line Interactive 1KVA/600W- 310302 Specifications : Le grand ups keor spx 1kva 310302 UPS 1KVA 1000VA
Vertiv Emerson Liebert itON LI32121CT00 800VA
Specifications : -True Double-Conversion Online UPS – Mircoprocessor control optimizes reliability – Input power factor correction – Output Power Factor 0.80. – Wide input voltage (110V – 300V) – Converter mode available – ECO mode for enegry saving (Only available for 1 – 3 KVA) – Generator compatible – Adjustable battery number only available for 6K and up models – Smart SNMP works well with either USB or RS-232 together – Emergency power off function (EPO) only available for 6K / 10K models – Optional isolation transformer available. manufacturer link
INVO Online INH600 INVO Online UPS High Frequency 6000 VA, LCD Display Inbuilt Battery 16 x 12V/7Ah online ups system high frequency and high load management. Full Specifications : AC Input Bypass AC Output Battery Fault Screen LCD AC Input Bypass AC Output Battery Fault Screen LCD 6 KVA/4200W Half -Load 120 -300VAC, Full -Load 165V -300VAC 176V`~276VAC Frequency 45.5Hz ~ 54.5Hz Power Factor 0.95 Output Voltage 220/230/240V ± 3% Waveform True Sine wave Frequency 50/60Hz ± 0.5 Distortion <3%(linear Load); <5%(Non -linear Load) Crest Factor 3:1 Efficiency 85% Overload Capacity 110%-150%:Switch to Bypass after 1min; >150%:Shutdown afte r 200ms Short Circuit UPS output turn off and alarm Battery Model 12V Sealed Lead -Acid Voltage 36DC 96DC 240C Configuration Recharge 90% Capacity after 8 Hours charging RS232 ;SNMP (Optional) LCD & LED Utility, Inverter, Bypass, Battery, Load ,Battery Mode ,Frequency , UPS Fault Indicator Audible Alarm -Battery Discharge Utility Failure, Beep/4s;Battery Low, Beep/1s UPS Abnornmal Continuous Beep and Red Led On Noise <55db (1Meter) Temperature 0°C~40°C Humidity 10%~90% Optional 19 inch Rack -mount Dimension (W * D * H) mm 357 x 144 x 215 439x190x341 514X262X455 (Long Time Mode) 514x262x710 (Standard Model) Specifications: Specifications : AC Input Bypass AC Output Battery Fault Screen LCD AC Input Bypass AC Output Battery Fault Screen LCD 1 year warranty Manufacturer Link
