The PROLINK IPS5003 Inverter is designed to provide reliable backup power for homes, offices, and essential electronic devices. It helps users maintain power during outages and supports stable operation for different electrical equipment. The inverter provides a 5000VA capacity and delivers stable AC power output for compatible devices. Additionally, it supports backup power needs for appliances, computers, and other important electronics. The PROLINK IPS5003 features pure sine wave output to provide clean power for sensitive equipment. Moreover, this technology helps improve compatibility with devices that require stable electricity performance. The inverter includes an LCD display that allows users to monitor important system information. Furthermore, users can check battery status, input voltage, output voltage, and operating conditions easily. The PROLINK IPS5003 includes protection features against overload, short circuit, over-temperature, and low battery conditions. Therefore, it helps protect connected devices and improves system safety during operation. The inverter supports different backup power applications for homes and small offices. In addition, its practical design makes it suitable for users who need dependable energy support during power interruptions. The PROLINK IPS5003 Inverter combines high power capacity, pure sine wave technology, monitoring features, and protection functions. As a result, it provides a reliable backup power solution for everyday electrical needs. manufacturer link Specifications: Capacity: 5000VA Output Waveform: Pure Sine Wave Display: LCD Display Protection: Overload, Short Circuit, Over Temperature, Low Battery Protection Application: Backup Power for Home and Office Equipment
The Beco GP800 800VA 480W UPS delivers dependable power protection for home and office electronics. It keeps devices running during short power cuts. This helps prevent data loss and sudden shutdowns. Users enjoy peace of mind with reliable backup power. Moreover, the Beco GP800 UPS features 800 VA capacity and 480 W output power for stronger protection. It supports desktops, routers, modems, and monitors easily. Devices stay powered long enough to save work. Performance remains stable. In addition, the UPS includes built-in surge protection for safety against spikes. It guards appliances from voltage surges and unstable power conditions. This adds extra defense during storms or power fluctuations. Protection stays consistent. Furthermore, the Beco GP800 800VA 480W UPS offers automatic voltage regulation without manual adjustment. It corrects voltage dips and spikes smoothly. This helps maintain steady performance for connected devices. Reliability improves everyday use. Also, the unit provides battery backup during outages to keep systems running. You can finish tasks and save files before shutdown. This reduces the risk of data corruption. Battery backup feels dependable. In addition, the Beco GP800 UPS includes clear LED indicators for power and battery status. You can check conditions at a glance. This makes monitoring simple and fast. Users stay informed. Furthermore, the Beco GP800 UPS supports easy installation and setup. Users can plug in devices quickly without complicated steps. Setup remains stress-free for beginners and experts. Overall, the Beco GP800 800VA 480W UPS delivers reliable battery backup, surge protection, and stable power output. It protects electronics and supports uninterrupted use. This UPS is ideal for users seeking strong, everyday power protection. Specifications: 800VA, 480W, LED, Plastic Case Input: 140-290 VAC Output: 230VAC 50/60HZ 12V 9AH *1pc, Universal Socket *2 + EU Plug With AVR, Bypass output Overload and short circuit protection
Hawk Ups 1500VA Input: Phase: Single + GND. Voltage Range: 165-275V/ 82V-138V. Frequency: 50/60Hz +- 10%. Output: Voltage Range: 220/230/240/110/120V +- 10%. Wave Form: Sine wave ( Mains), Square Waves (inverter). Frequency: 50/60Hz +- 1% (Batter Mode). Crest Factor: 3:1. Transfer time: <10ms. Protection: Energy rating: 320 Joules Instantaneous response. Test Standard: IEEE 587 Cat. A&B. Noise Filtering: EMI/RFI: Full Time Suppression. Communication: RS232 or USB with PC monitoring software and cable (optional). Battery: Type: Sealed Lead-acid. Quantity: (x2) 12V8A. Backup Time: 15-20min depends on the load.
Specifications : Le grand ups keor spx 2kva 2000va 1200w ups 2kva 1 year warranty
INVO Online INH300 Centralized server center, mainframe, network control center, computing center Full Specifications : 3KVA 2100 W Half -Load 120 -300VAC, Full -Load 165V -300VAC 45.5Hz ~ 54.5Hz 220/230/240V ± 3% Waveform True Sine wave Frequency 50/60Hz ± 0.5 Distortion <3%(linear Load); <5%(Non -linear Load) Crest Factor 3:1 Efficiency 85% Overload Capacity 110%-150%:Switch to Bypass after 1min; >150%:Shutdown afte r 200ms Short Circuit UPS output turn off and alarm RS232 ;SNMP (Optional) LCD & LED Utility, Inverter, Bypass, Battery, Load ,Battery Mode ,Frequency , UPS Fault Indicator Audible Alarm -Battery Discharge Utility Failure, Beep/4s;Battery Low, Beep/1s UPS Abnornmal Continuous Beep and Red Led On Noise <55db (1Meter) Temperature 0°C~40°C Humidity 10%~90% Optional 19 inch Rack -mount Dimension (W * D * H) mm 357 x 144 x 215 439x190x341 514X262X455 (Long Time Mode) 514x262x710 (Standard Model) Specifications: Specifications : INVO Online UPS High Frequency 3000 VA, LCD Display Inbuilt Battery 6 x 12V/7Ah AC Input 2. Bypass 3. AC Output 4. Battery 5. Fault 6. Screen 9. LCD 1. AC Input 2. Bypass 3. AC Output 4. Battery 5. Fault 6. Screen 9. LCD 1 year warranty Manufacturer Link
APC Easy UPS 800VA 230V Line Interactive UPS is a reliable power backup solution designed to protect home and office electronics from power outages, voltage fluctuations, and surges. It ensures stable and continuous operation for essential devices during unstable electricity conditions. It provides 800VA / 450W power capacity with line-interactive technology. Therefore, it automatically regulates voltage through AVR (Automatic Voltage Regulation) without switching to battery mode frequently. In addition, it helps extend battery life and maintain stable power output. The UPS includes an LED status display for clear monitoring of system and power conditions. As a result, users can easily check operational status, battery level, and load conditions at a glance. It features universal receptacles for flexible device compatibility. Meanwhile, its compact design and 5.3 kg weight make it easy to install in home or office environments. APC designs the Easy UPS series for dependable and efficient power protection. Therefore, this model is ideal for PCs, networking equipment, routers, and other essential electronics. Specifications: 800VA / 450W power capacity Line-interactive AVR technology LED status monitoring display Universal output receptacles Reliable backup for PCs and electronics
UPS battery 12V 7A Battery for UPS 7A 12v
UPS PCE VX / MXOnline 2KVA 1600W is a double-conversion online UPS designed for continuous protection of servers, PCs, and network systems. It delivers stable power during outages and voltage fluctuations. In addition, it uses online double-conversion technology. Therefore, it provides zero transfer time between mains and battery mode. Moreover, it delivers pure sine wave output for safe operation of sensitive equipment. Furthermore, it supports a 2KVA / 1600W load capacity. As a result, it can power multiple devices such as computers, routers, and small server setups. It also maintains stable voltage regulation under unstable input conditions. In addition, it includes built-in protection features. Therefore, it helps protect against overload, short circuit, and power instability. Moreover, it is designed for environments that require continuous uptime and reliability. Overall, UPS PCE VX / MXOnline 2KVA 1600W delivers stable backup performance, zero-interruption switching, and strong protection for critical systems. Specifications: 2KVA / 1600W capacity for professional equipment Online double-conversion UPS technology Zero transfer time for uninterrupted power Pure sine wave output for stable devices Advanced protection against overload and faults
The PROLINK PRO1501SFC Super Fast Charging UPS is designed to provide reliable backup power and voltage protection for computers, networking equipment, and office electronics. It helps maintain device operation during power interruptions and unstable electrical conditions. The UPS provides a 1500VA capacity and uses line interactive technology with Automatic Voltage Regulation (AVR). Additionally, AVR helps correct voltage fluctuations and provides stable power for connected equipment. The PROLINK PRO1501SFC features super-fast charging technology that reduces battery recharge time after power outages. Moreover, this allows the UPS to recover faster and become ready for future power interruptions. The UPS includes protection features against overload, short circuit, surge, and battery discharge. Furthermore, these safety functions help protect connected devices from common electrical issues. The PROLINK PRO1501SFC provides reliable backup support for homes, offices, and small work environments. Therefore, it is suitable for computers, routers, CCTV systems, and other essential electronic devices. The UPS features a practical design for easy installation and daily use. In addition, its line interactive operation provides efficient power management while maintaining equipment protection. The PROLINK PRO1501SFC Super Fast Charging UPS combines 1500VA backup capacity, AVR technology, fast charging, and protection features. As a result, it provides a dependable power solution for everyday electronic equipment. manufacturer link Specifications: Capacity: 1500VA / 900W Technology: Line Interactive UPS with AVR Charging: Super Fast Charging Technology Protection: Overload, Surge, Short Circuit, Battery Protection Application: Computer, Network, and Office Equipment Backup
The Beco GP600 600VA 360W UPS delivers reliable power protection for home and office devices. It keeps your electronics safe during outages and voltage drops. This UPS helps prevent data loss and sudden shutdowns, providing peace of mind every day. Moreover, the Beco GP600 600VA 360W UPS features 600 VA capacity with up to 360 W output power. It supports computers, routers, modems, and monitors effortlessly. Devices continue running smoothly during short power interruptions. This improves system stability. In addition, the UPS includes built-in surge protection for safe operation. It guards connected devices against spikes and surges. This adds an extra layer of defense during storms or unstable power conditions. Safety remains a priority. Furthermore, the Beco GP600 600VA 360W UPS offers battery backup that keeps equipment running long enough to save work. This prevents data corruption during sudden outages. Users can shut down systems properly. Protection feels dependable. Also, the unit delivers stable voltage regulation without manual adjustment. It corrects fluctuations automatically. This improves device performance and lifespan. Steady power enhances everyday use. In addition, the Beco GP600 600VA 360W UPS includes easy-to-read LED indicators. They show power and battery status at a glance. Users stay informed without confusion. Monitoring becomes simple and quick. Moreover, the UPS features multiple outlets for connecting several devices at once. This increases flexibility for workstations and entertainment setups. You can protect more devices with one unit. Furthermore, the Beco GP600 600VA 360W UPS supports simple installation without complicated steps. Setup is quick with clearly marked connections. This helps both beginners and experienced users. Also, the compact design fits well on desks or shelves without taking much space. It blends into home and office environments easily. Portability stays practical. Overall, the Beco GP600 600VA 360W UPS delivers dependable battery backup, surge protection, and steady power. It protects vital electronics and supports uninterrupted use. This UPS is ideal for users seeking reliable power protection every day. Specifications: 600VA, 360W, LED, Plastic Case Input: 145-290 VAC Output: 230VAC 50/60HZ 12V 7AH *1pc, Universal Socket *2 + EU Plug With AVR, Bypass output Overload and short circuit protection
Specifications : -True Double-Conversion Online UPS – Mircoprocessor control optimizes reliability – Input power factor correction – Output Power Factor 0.80. – Wide input voltage (110V – 300V) – Converter mode available – ECO mode for enegry saving (Only available for 1 – 3 KVA) – Generator compatible – Adjustable battery number only available for 6K and up models – Smart SNMP works well with either USB or RS-232 together – Emergency power off function (EPO) only available for 6K / 10K models – Optional isolation transformer available. manufacturer link
General Topology Online double conversion Configuration Tower Part Number 9E3000I Rating (VA/Watts) 3000/2400 Dimensions (H x W x D, mm) 399 x 330 x 190 Weight (kg) 24.2 Warranty 2 years Electrical Input Connection (1) IEC-320-C20 Input Voltage Range 176-300V without derating (up to 100-300V with derating) Nominal Voltage 208/220/230/240V Frequency 50/60 Hz autoselection Frequency Range 40-70 Hz Electrical Output Voltages 208V*/220V/230V/240V ±1% Voltage THD <2% for 100% linear load Outlets (6) IEC-320-C13 (1) IEC-320-C19 Overload Capacity 105%-130% : 60s, 130%-150% : 10s,>150% : ≥ 300ms Efficiency (Normal Mode) Up to 91% in Online mode Output Frequency 50/60 Hz autoselect Communications Communication Ports 1 USB port + 1 RS232 serial port (USB and RS232 ports cannot be used simultaneously) Communication Slot 1 slot for Network-M2, ModBus-MS or Relay-MS cards Power Management Software Intelligent Power Editions Environmental & Standards Audible Noise <37 dB @ typical load Operating Temperature 0 to 40°C Safety markings IEC/EN 62040-1 EMC Markings IEC/EN 62040 -2 Approvals CE, CB report (TUV)
Specifications : UPS Type Tower Phase Single phase with ground Rating (VA) 10000 Nominal Power (W) 8000 Standard ModelDimension (mm) 442 x 190 x 688 (D x W x H) Weight (kg) 66 Long-run ModelDimestions (mm) 442 x 190 x 318 (D x W x H) Weight (kg) 16 INPUT Connection Type Terminal Nominal Voltage 208/220/230/240VAC Voltage Range 110-300 VAC (Load at 50%)176-300 VAC (Load at 100%) Frequency Range 46~54 Hz or 56~64 Hz Power Factor >= 0.99 OUTPUT Connection Type Terminal Output Voltage 208/220/230/240VAC Voltage Regulation ±1% Frequency Range (Synchronized Range) 46~54 Hz or 56~64 Hz Frequency Range (Batt. Mode) 50Hz or 60Hz +/-0.1Hz Current Crest Ratio 3:1 Harmonic Distortion ≤3% THD (Linear load)≤5% THD (Non-linear load) ALARM & INDICATORS Battery Mode Sounding every 4 seconds Low Battery Sounding every second Overload Sounding twice every second Fault Continuously sounding LCD Load level, Battery Level, AC mode, Battery mode, Bypass mode and Fault CONNECTIVITY, CONTROL & MONITORING Front panel Status LED, Function keys, LCD display Communication Smart RS232*USB Port Emergency Power Off (EPO) BATTERY Standard ModelType 12V / 9Ah Numbers 16 Typical Recharge Time 9 hours recover to 90% capacity Long-run ModelType Depending on the capacity of external batteries Number 16 ~ 20 (Adjustable) Charging Current (max) 1A/2A/4A/6A (Adjustable, 6A is only available for 16pcs batteries) manufacturer link
The Invo Line Interactive UPS INLI Series is a power protection solution designed to provide backup power and voltage regulation for computers, networking equipment, and other electronic devices. It helps protect connected equipment from power interruptions, voltage fluctuations, and electrical disturbances. Therefore, it is suitable for home, office, and professional environments. The line interactive technology provides automatic voltage regulation to maintain stable power output while reducing the impact of unstable electricity. In addition, the series includes multiple capacity options from 750VA to 3000VA, allowing users to select a suitable model for their power requirements. As a result, it supports different setups ranging from personal computers to larger equipment. The system includes models with LED or LCD displays, built-in batteries, and external battery support depending on the selected capacity. Moreover, higher-capacity models provide extended backup options with additional battery configurations. Therefore, the INLI Series offers flexible solutions for different power backup needs. The workflow compatibility makes this UPS series suitable for protecting PCs, workstations, networking devices, and other sensitive electronics. In addition, the compact tower design and protection features help provide reliable operation during power events. Specifications: Capacity options: 750VA to 3000VA Technology: Line Interactive UPS with AVR Display options: LED or LCD depending on model Battery options: Built-in or external batteries Models available: INLI85, INLI100, INLI150, INLI200, INLI300 and more
Legrand Ups Keor SPX Line Interactive 1KVA/600W- 310302 Specifications : Le grand ups keor spx 1kva 310302 UPS 1KVA 1000VA
The Eaton 9E UPS Online Double Conversion 6000VA 4800W is a powerful and reliable power backup solution. It ensures uninterrupted power for critical devices, protecting them from outages and fluctuations. This UPS uses advanced double-conversion technology for maximum power reliability. It provides consistent and clean power, making it perfect for sensitive equipment like servers, medical devices, and data centers. The Eaton 9E UPS delivers 6000VA (4800W) of capacity, making it suitable for high-load environments. Its robust design ensures consistent performance even during extended power outages. This makes it ideal for businesses that cannot afford downtime. Setting up the UPS is simple, and it integrates seamlessly into existing systems. It comes with an intuitive LCD interface, making monitoring and management straightforward. You can easily view critical information, such as load levels, battery status, and alerts. The Eaton 9E UPS also features a scalable runtime. You can add additional battery modules to extend backup time as your needs grow. This flexibility ensures long-term usability and value. With its compact footprint, the UPS saves space in your office or server room. Its energy-efficient design reduces operating costs while ensuring reliable performance. This UPS is equipped with advanced features, such as remote monitoring capabilities. Using Eaton’s management software, you can monitor and control the UPS from anywhere. The Eaton 9E UPS Online Double Conversion 6000VA 4800W is a reliable investment for protecting your critical systems. Ensure uninterrupted power for your business with this advanced and efficient UPS solution. Specifications: Wattage : 4800W VA Rating : 6000 VA
The PCE EX Online 6 KVA 5400W is a high-capacity online UPS built for strong power protection in offices and business environments. This UPS delivers clean and stable electricity even during severe power issues. Moreover, its true double-conversion design removes surges, sags, and spikes for safe device operation. Therefore, it fits companies and users who need dependable backup without interruption. First, the PCE EX Online 6 KVA 5400W supplies pure sine wave output for sensitive electronics like servers, workstations, and networking gear. This helps protect your devices from damage and performance drops. In addition, the online design ensures seamless switching between mains and battery power. As a result, connected equipment stays powered without sudden shutdowns during outages. Next, this UPS supports a high load capacity for multiple systems at once. You can run large setups including computers, storage units, and critical machinery. Furthermore, advanced battery management maximizes runtime and extends battery health. This means longer backup support when power cuts last. Meanwhile, the LCD display shows real-time status, load, and battery info for easy monitoring. The durable build quality makes the unit reliable for daily heavy use and long operational hours. Additionally, installation and setup are quick, with minimal steps required. Consequently, you save time and avoid complex configurations. Also, the UPS includes advanced safety features to prevent overloads and short circuits for extra peace of mind. Smart communication options integrate with software for automatic shutdown and alert notifications. This keeps systems protected even when you are away. Moreover, the UPS runs quietly and remains cool under full load without noise disruption. Therefore, it fits well in busy workspaces without distraction. Overall, the PCE EX Online 6 KVA 5400W delivers seamless power backup, strong protection, and stable performance. It provides great value for users who need reliable power security for critical systems. Specifications: Voltage : 220V, 230V, or 240V Capacity :12v/7Ah Frequency:50/60 Hz
Eaton 5S UPS, 1500 VA, 900 W, Input: C14, Outputs: (4) C13, (4) C13 surge only, Tower General Topology Line-Interactive (AVR with Booster + Fader) Configuration Tower or under monitor Part Number 5S1500i Color Black Rating (VA/Watts) 1500/900 Dimensions (H x W x D, mm) 250 x 87 x 382 Weight (kg) 11.08 Electrical Input Connection (1) IEC-320-C14 Input Voltage Range 175V-275 V Nominal Voltage 230 V Operating Frequency 50-60 Hz autoselect Electrical Output Nominal Voltage 230 VAC Output voltage regulation 230 V +/- 10% Outlets (4) IEC-320-C13 (4) IEC-320-C13 surge only Communications Communication Ports HID-compliant USB port for automatic integration with most common operating systems (Windows Vista, 7 & 8, Linux, Mac OS X), cable supplied Environmental & Standards Audible Noise < 40 dB at 1 Meter Operating Temperature 0 to 40°C Safety markings IEC/EN 62040-1, IEC/EN 62040 -5 Markings CB Report, CE mark Data Line Protection Tel/Fax/Modem/Internet and Ethernet 2 Years Warranty manufacturer link
Key Features Output Connections (1) IEC 60320 C19 Input Connections Schuko CEE 7 / EU1-16P Cord Length 8.2ft (2.5meters) Power Cord, C19 to CEE/7 Schuko, 2.5m Wide selection of Rack PDU power cords for a variety of IT equipment. Specifications : Output Overload Protection No Maximum Total Current Draw 16 Input Input frequency 50/60 Hz Acceptable Input Voltage 90 – 250VAC Number of Power Cords 1 Maximum Input Current 16A Maximum Line Current 16A Physical Net Weight 0.49lbs. (0.22KG) Shipping weight 0.66lbs. (0.3KG) Shipping Height 2.01inches (51MM, 5.1CM) Shipping Width 4.02inches (102MM, 10.2CM) Shipping Depth 7.99inches (203MM, 20.3CM) Color Black Environmental Operating Temperature 32 – 113 °F (0 – 45 °C) Operating Relative Humidity 0 – 95 % Operating Elevation 0 – 10000ft (0 – 3048meters) Storage Temperature -25 – 65 °C Storage Relative Humidity 0 – 95 % Storage Elevation 0 – 50000ft (0 – 15240meters) manufacturer link
APC Easy UPS On-Line SRV 10000VA 230V SRV10KI is a high-capacity online uninterruptible power supply designed for critical business infrastructure, servers, and data center environments. It provides continuous, clean, and stable power using true double-conversion technology. It delivers 10000VA / 10000W (approx.) power capacity for heavy-duty applications. Therefore, it can support multiple servers, networking equipment, and sensitive electronics during power failures or voltage fluctuations. In addition, it ensures uninterrupted operation for mission-critical systems. The UPS uses online double-conversion technology to fully isolate connected equipment from utility power disturbances. As a result, it provides consistent, regulated pure sine wave output at all times. It includes an LCD interface for real-time monitoring of system status, load, and battery conditions. Meanwhile, built-in protection features enhance system safety and operational reliability. APC designs the Easy UPS SRV series for enterprise-grade power protection. Therefore, this model is ideal for data centers, IT infrastructure, and critical business applications requiring maximum uptime. Manufacturer link Specifications: 10000VA high-capacity output Online double-conversion UPS system Pure sine wave power output LCD monitoring display Enterprise-grade power protection
APC UPS Accessories SRVRK2 APC Easy UPS RAIL KIT, 900MM, 1 – 10KVA (Rackable SRV models)
The Twist Line Interactive UPS 850VA TWUP850/LI provides backup power protection for computers, networking devices, and office electronics. It uses line interactive technology with automatic voltage regulation for stable power delivery. Additionally, the built-in 12V/7Ah battery supports continued operation during power interruptions. Moreover, the UPS includes LED status indicators for clear system monitoring. It also supports cold start functionality for startup without direct AC power. Therefore, it helps protect connected devices from voltage fluctuations and sudden outages. Furthermore, the compact tower design fits easily in home and office environments. The system also includes overload and short-circuit protection for safer daily operation. Additionally, the simulated sine wave output supports common desktop and networking equipment. Specifications: 850VA line interactive UPS technology Built-in 1x12V/7Ah rechargeable battery LED indicators for power status monitoring Automatic voltage regulation for stable output Overload and short-circuit protection system
Max Configurable Power (Watts) 6.0kWatts / 6.0kVA Efficiency at Full Load 94.0 % Output Frequency (sync to mains) 50/60 Hz +/- 3 Hz Sync to mains Other Output Voltages 220 V, 240 V Load Crest Factor 3 : 1 Topology Double conversion online Waveform type Sine wave Bypass Internal bypass (automatic and manual) Input Input frequency 40 – 70 Hz Input voltage range for main operations 110 – 300 Adjustable (half load), 176 – 300V Efficiency at Full Load 94.0 % Other Input Voltages 220 V, 240 V Batteries & Runtime Battery type Lead-acid battery Typical recharge time 3hour(s) Battery Charge Power (Watts) 373 Watts Runtime View Runtime Graph View Runtime Chart Communications & Management Interface Port(s) DB-9 RS-232, Intelligent Smart Slot, USB Control panel Multifunction LCD status and control console Audible Alarm Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm Emergency Power Off (EPO) Yes Available SmartSlot™ Interface Quantity 1 Surge Protection and Filtering Surge energy rating 600Joules Physical Maximum Height 685MM, 68.5CM Maximum Width 190MM, 19.0CM Maximum Depth 374MM, 37.4CM Net Weight 54.0KG Shipping weight 66.0KG Shipping Height 910MM, 91.0CM Shipping Width 290MM, 29.0CM Shipping Depth 495MM, 49.5CM Color Black Environmental Operating Temperature 0 – 40 °C Operating Relative Humidity 0 – 95 (Non-condensing) % Operating Elevation 0 – 3000meters Storage Temperature -15 – 60 °C Storage Relative Humidity 0 – 95 (Non-condensing) % Storage Elevation 0 – 15000meters Audible noise at 1 meter from surface of unit 55.0dBA Protection Class IP20 1 YEAR WARRANTY
APC 800VA BX800LI 415W UPS (IEC Plug) APC 650VA BX650LI UPS
UPS ONLINE 2KVA 1600W PURE SINEWAVE 1 YEAR WARRANTY
