Gigabit Ethernet,1x Combo port SFP or Gigabit Ethernet 1xSFP The new updated revision of CCR1009 is here. We attempted to combine all the customer feedback and best practice in CCR device manufacturing that we learned over the last three years, since the first CCR1009 devices were launched. Important changes No switch-chip – the device now features only fully independent Ethernet ports each with a direct connection to the CPU, allowing to overcome previous shared 1Gbit limitation from switch-chip ports and utilize full potential of CPU processing power on those ports. Combo-port – a single 1Gbit software interface that has two hardware interfaces – an SFP cage and a Gigabit Ethernet port, allowing you to use any type of connection available to you. It is also possible to switch between both physical interfaces in RouterOS. In an event of disconnect the combo-port provides hardware fail-over feature. 100Mbps SFP support – this is our first device that supports 100BASE-LX/100BASE-SX/100BASE-BX fiber modules, as well as standard 1.25G SFP modules. More throughput – because the ports are now directly connected to the CPU, the new CCR1009 can achieve even higher throughput. This unit is equipped with passive cooling enclosure, two heat-pipes and a specially designed heat-sink, so its completely silent. It’s powered by an external 24V 2.5A AC/DC adapter and supports power redundancy if you also power it from the PoE input port.
MikroTik RB2011UiAS-RM The MikroTik RB2011UiAS-RM is a low cost multi port device series. Designed for indoor use, and available in many different cases, with a multitude. The RB2011 is powered by RouterOS, a fully featured routing operating system . which has been continuously improved for fifteen years. Dynamic routing, hotspot. firewall, MPLS, VPN, advanced quality of service, load balancing and bonding, real-time . configuration and monitoring – just a few of the vast number of features supported by RouterOS. RouterBOARD 2011UiAS-RM, in comparison with RB2011L series, not only has five Gigabit . LAN ports and five Fast Ethernet LAN ports, but also has RJ45 serial port, USB port and more RAM. (128MB instead of 64MB). Also, it has RouterOS L5 license (instead of L4) and nice touchscreen LCD for configuration. SFP cage is also present (SFP module not included!) There is PoE output function for port #10 – it can power other PoE capable devices with the same . voltage as applied to the unit. Maximum load on the port is 500mA. Tested and recommended to use with MikroTik SFP modules: S-85DLC05D. S-31DLC20D and S-35/53LC20D (not included) RouterBOARD 2011UiAS-RM comes with 1U rackmount enclosure, LCD panel and power supply. Details Product code RB2011UiAS-RM Architecture MIPSBE CPU AR9344 CPU core count 1 CPU nominal frequency 600 MHz Switch chip model AR8327 Dimensions 443 x 92 x 44 mm RouterOS license 5 Operating System RouterOS Size of RAM 128 MB Storage size 128 MB Storage type NAND MTBF Approximately 200’000 hours at 25C Tested ambient temperature -40°C to 60°C Suggested price $119.00 Powering Details Number of DC inputs 2 (DC jack, PoE-IN) DC jack input Voltage 8-30 V Max power consumption 28 W Max power consumption without attachments 6 W Cooling type Passive PoE in Passive PoE PoE in input Voltage 8-30 V PoE-out Details PoE-out ports Ether10 PoE out Passive PoE Max out per port output (input 18-30 V) 510 mA Max total out (A) 510 mA Specifications: Specifications Product code RB2011UiAS-RM Architecture MIPSBE CPU AR9344 CPU core count 1 CPU nominal frequency 600 MHz Switch chip model AR8327 Dimensions 443 x 92 x 44 mm RouterOS license 5 Operating System RouterOS Size of RAM 128 MB Storage size 128 MB Storage type NAND MTBF Approximately 200’000 hours at 25C 1 year warranty manufacturer link
Are you in need of a reliable networking solution for your business or home? Look no further than the Cudy 24-Port PoE+ Switch. With its advanced features and user-friendly design, it’s the perfect choice for streamlining your network setup. First and foremost, let’s talk about its power over Ethernet (PoE+) capability. This innovative technology allows you to power devices such as IP cameras, VoIP phones, and access points directly through the Ethernet cable, eliminating the need for separate power sources. Moreover, the Cudy 24-Port PoE+ Switch offers seamless connectivity with 24 ports, providing ample room for expanding your network. Say goodbye to the hassle of dealing with multiple switches and cables cluttering your space. Additionally, setup is a breeze with plug-and-play functionality. Simply connect your devices to the switch, and you’re ready to go. No complex configurations or technical expertise required – making it perfect for both novice users and IT professionals alike. Furthermore, the switch ensures reliable performance with its gigabit Ethernet ports, delivering fast and stable data transfer speeds. Whether you’re streaming multimedia content, transferring files, or conducting video conferences, you can count on uninterrupted connectivity. In conclusion, the Cudy 24-Port PoE+ Switch is the ultimate networking solution for businesses and homes seeking reliability, performance, and ease of use. Streamline your network setup today and experience seamless connectivity like never before. Specifications: 24 PoE Ports : 10/100/Mbps 2 x Gigabit Uplink port 1 x 1.25Gbps SFP slot Bandwidth: 10.8Gbps
TP-Link Omada SM5110-SR 10GBase-SR SFP+ LC Transceiver is a high-speed multi-mode fiber module designed for short-range 10 Gigabit Ethernet connections in enterprise and data center networks. It delivers fast and stable optical communication between compatible SFP+ devices such as switches, routers, and servers. The TP-Link Omada SM5110-SR supports the 10GBase-SR standard with a data rate of 10 Gbps. Therefore, it provides reliable high-speed fiber transmission for backbone and aggregation links. In addition, it operates over multi-mode fiber using an 850 nm wavelength and supports distances up to 300 meters on OM3 fiber. Moreover, the TP-Link Omada SM5110-SR uses an LC duplex connector and follows the SFP+ Multi-Source Agreement (MSA). As a result, it ensures compatibility with Omada switches and other supported 10G SFP+ networking equipment. In addition, it supports full-duplex communication for stable data transfer. The TP-Link Omada SM5110-SR is hot-swappable. Therefore, you can install or replace it without shutting down the network. In addition, it supports Digital Diagnostic Monitoring (DDM), which helps track performance and operating conditions in real time. Furthermore, it is designed for short-distance fiber links such as within racks, floors, or nearby rooms. It helps reduce latency while maintaining high bandwidth performance in dense network environments. Finally, the TP-Link Omada SM5110-SR delivers reliable 10G multi-mode fiber connectivity, simple deployment, and stable performance for professional networking setups. Specifications: Speed: 10 Gbps 10GBase-SR fiber transceiver Fiber: Multi-mode LC duplex connector (850 nm wavelength) Distance: Supports up to 300 meters on OM3 fiber Features: Hot-swappable with Digital Diagnostic Monitoring (DDM) Compatibility: SFP+ MSA compliant for Omada and enterprise switches
UPS ONLINE 2KVA 1600W PURE SINEWAVE 1 YEAR WARRANTY
Fast-charging feature available on select iPhone and iPad models.
The Logitech Rally Plus Video Conferencing Kit (960-001242) is a modular conferencing system designed for large and extra-large meeting rooms. It combines a premium PTZ camera, two speakers, and two microphone pods to deliver clear video and audio coverage across wide spaces. Additionally, it connects via USB for simple integration with meeting room computers and conferencing platforms. This system features a 4K Ultra HD camera with 15x HD zoom, along with pan and tilt control for flexible framing. Moreover, it uses RightSight technology to automatically frame participants and adjust during meetings for a more natural experience. The Logitech Rally Plus Video Conferencing Kit includes two high-performance speakers and two mic pods with beamforming technology. In addition, RightSound technology uses AI to reduce background noise, balance voices, and improve speech clarity during calls. The system also supports expansion with additional mic pods, allowing coverage for larger groups. Therefore, it is suitable for conference rooms, boardrooms, and enterprise collaboration environments that require reliable audio and video performance. Specifications: 4K Ultra HD PTZ camera with 15x HD zoom Dual speakers with high-performance audio output Two mic pods with beamforming voice pickup RightSight and RightSound AI technologies Modular system expandable up to 7 mic pods
The SanDisk MicroSDXC UHS-I for Nintendo Switch gives you reliable and fast game storage for your console. It supports UHS-I bus and offers read speeds up to 100 MB/s. Consequently, you can load games faster and spend more time playing. With capacities up to 1 TB, the SanDisk MicroSDXC UHS-I for Nintendo Switch lets you store hundreds of titles without worrying about space. Moreover, the lifetime limited warranty adds extra peace of mind. The card is officially licensed for Nintendo Switch systems, so it fits easily and works smoothly. In addition, this memory card supports both microSDHC and microSDXC formats. For best results, the SanDisk MicroSDXC for Nintendo Switch meets the console’s guidelines for high-speed cards. Therefore, game builds and assets load faster and operate more efficiently. The compact card is lightweight and easy to carry. It fits in the console’s card slot or a portable organizer. Furthermore, it works with desktops and laptops via adapters when you transfer game saves or media. If you are upgrading your Nintendo Switch storage, the SanDisk MicroSDXC UHS-I for Nintendo Switch is a smart choice. It balances capacity, performance, and compatibility. In short, it gives you the space you need, the speed you want, and the reliability you expect from a trusted brand. Specifications: Memory storage capacity : 256GB Transfer Speed : 100MB/s Read, 90MB/s Write
90W AC Charger Fit for Acer Aspire Z 24 Z24-890 Z24-880-UR13 Z22-780 Z24-890-UR11 Z24-890-UA91 Z24-890-UR13 Z24-890-UR16 Aspire 7 A715-76-765N A715-76-73L8 Laptop Adapter Power Supply Cord
The Logitech Brio 501 Webcam delivers clear video with Full HD resolution for meetings and streaming. It ensures a professional appearance in calls. Moreover, RightLight 4 adjusts lighting automatically. This helps you look clear in low or uneven light. The auto-framing feature keeps you centered during movement. This improves your presence during meetings. In addition, Show Mode lets you tilt the camera to present objects. This is useful for desk demonstrations. Dual noise-reducing microphones capture clear voice audio. Background noise is reduced during calls. It also includes a built-in privacy shutter for security. USB-C connectivity ensures easy setup and compatibility. The Logitech Brio 501 Webcam is a reliable choice for video calls, streaming, and daily communication. Specifications: Resolution : 1080p/30fps, 720p/60fps Camera : 4 Megapixels Hardware Zoom : Digital 4x Built-in microphone type : Stereo microphone USB Connectivity : USB-C Plug and Play Color : Graphite
