The Ruijie Reyee RG‑ES118FGS‑LP 16‑Port 10/100 Mbps with 2‑Port Gigabit Unmanaged PoE Switch combines power and speed with simplicity. It offers sixteen Fast Ethernet ports for reliable data connections in any network. Moreover, two gigabit uplink ports deliver high-speed bandwidth to core devices. Also, the switch supports 802.3af/at PoE standards for flexible device powering. In addition, it supplies a total PoE budget of 150 W for easy device setup. Besides that, plug‑and‑play design means zero configuration to start working. Furthermore, fanless cooling ensures whisper‑quiet operation in any environment. Therefore, users enjoy silent and stable performance without noise distractions. It features auto‑negotiation and auto MDI/MDIX to simplify cable connection. Also, non‑blocking switching delivers consistent data flow across all connected ports. Plus, built-in surge protection safeguards against power spikes and damage. Meanwhile, the metal housing boosts durability and helps disperse heat efficiently. Importantly, this unit operates between 0 °C and 45 °C for stable reliability. Also, it runs on an external 52 V DC power supply for safety. Unlike managed switches, this model requires no firmware updates or config work. However, it still connects to Ruijie Cloud when paired with managed gear. This gives optional network monitoring and visibility even in simple setups. For example, offices, retail stores, and surveillance systems benefit from PoE power. Then, users plug in devices and power cables to start easy installation. Moreover, combining data and power reduces cable clutter and speeds deployment. As a result, setup is faster and more organized than separate wiring. Also, the sturdy build ensures long-term use with minimal maintenance. In conclusion, the Ruijie Reyee RG‑ES118FGS‑LP switch blends Fast Ethernet, gigabit uplinks, and PoE. Finally, it offers excellent value for users needing reliable, powered networking with easy setup. Specifications: 16-Port 10/100 Mbps with 2-Port Gigabit Unmanaged PoE Switch
The Ruijie Reyee RG‑ES116G‑L 16‑Port 10/100/1000 Mbps Unmanaged Non‑PoE Switch expands your network capacity with ease. It supports sixteen gigabit Ethernet ports for fast, reliable data transfer. Moreover, the switch is fully plug‑and‑play, so users need no setup. Also, its sturdy metal case fits well in racks or on desks. In addition, the fanless design ensures whisper‑quiet operation in any room. Besides that, energy‑efficient technology reduces power usage and saves money. Furthermore, it supports auto‑negotiation and auto MDI/MDIX to avoid cable issues. Therefore, the switch works with various Ethernet cables without fuss. It delivers non‑blocking switching architecture for smooth network traffic. Also, a 16 K MAC address table supports many connected devices. Plus, it uses an external 12 V DC adapter for simple power supply. Meanwhile, the metal housing improves durability and helps heat dissipation. Importantly, there are no fans or moving parts to create noise. Also, it operates reliably between 0 °C and 45 °C for stable performance. Moreover, it weighs only about 1 kg for easy handling or mounting. Unlike managed switches, this unit needs no configuration or firmware updates. However, it still integrates with Ruijie Cloud when paired with other managed devices. This optional feature offers basic visibility and network monitoring capabilities. For example, classrooms, offices, and server rooms benefit from its high port count. Then, users plug in Ethernet cables and power to start networking instantly. Moreover, its low‑maintenance design ensures long‑term reliability. As a result, you gain fast, simple, and worry-free connectivity. Also, the robust build resists wear and provides dependable performance. Furthermore, the metal form adds professional appeal to any setup. In conclusion, the Ruijie Reyee RG‑ES116G‑L delivers gigabit networking at scale. Finally, it offers great value for anyone needing high-capacity, plug‑and‑play networking. Specifications: 16-Port 10/100/1000 Mbps Unmanaged Non-PoE Switch
The TP-Link 3-Port USB UE330 is a compact USB hub that expands your computer’s connectivity. First, it adds three USB 3.0 ports for fast data transfer and charging. Therefore, you can connect multiple devices like flash drives, keyboards, and mice simultaneously. In addition, the hub supports backward compatibility with USB 2.0 and 1.1 devices. It provides reliable performance without slowing down your connections. Moreover, the plug-and-play design requires no drivers, making setup quick and easy. Finally, the lightweight and portable design allows you to carry it anywhere. For example, it is perfect for travel, office, or home use when extra USB ports are needed. manufacturers link you can also check here Specifications: Three USB 3.0 ports for fast data transfer and simultaneous device connection Backward compatible with USB 2.0 and 1.1 devices for flexibility Plug-and-play setup requires no drivers for easy use Compact and lightweight design ideal for travel or office use Reliable performance ensures stable connections for multiple peripherals
The TP‑Link TL‑POE2412G 24V Passive PoE Adapter provides both power and data over a single cable for devices that support 24V passive PoE. It supports two Gigabit Ethernet ports to handle data and power simultaneously. This setup reduces cable clutter and simplifies network installations. The adapter provides up to 12W of power at 24VDC to connected devices. It is plug‑and‑play, so no configuration is needed. The design includes a wall‑mounting option, making installation flexible. TP‑Link TL‑POE2412G ensures reliable and consistent power delivery. It automatically determines the power requirements of connected devices. This makes it ideal for IP cameras, access points, and other passive PoE devices. Specifications: • Two Gigabit Ethernet ports for data and power delivery• Supports 24VDC passive PoE with up to 12W power output• Plug‑and-play operation with no configuration required• Auto‑determines the power requirements of connected devices• Convenient wall‑mounting design for flexible placement
PCE VX Online 1 KVA 800W Internal Batteries Double Conversion Online- Pure Sine Wave Model VX 1K Input Rating Voltage Frequency Voltage range Power Factor THDi 1000VA 220V, 230V, 240V, 1Ø 2Wires 40~70Hz 176-300 VAC at 100% load, 110-300 VAC at 50% load >99% <5% Ouput Active Power @ PF=0.9 Voltage (on battery) Frequency (on battery) Transfer Time Efficiency UPS Design Technology Output Wave Form Total Harmonic distortion (THD) Crest Factor 900W 220V, 230V, 240V, +/-1% (selectable output voltage), 1Ø 2Wires 50/60 Hz +/-0.2% 0 ms 93% Online double conversion design Pure Sinewave ≤3% (linear load), ≤5% (non linear load) 3:1 Protection Overload Protection Short Circuit Protection 110% for 10min, 130% for 1min, >130% for 3sec UPS output cuts off immediately using input fuse/circuit breaker protection System Display LCD indicators Load level, Battery level, AC mode, Battery mode, Bypass mode, and Fault indicators Alarm Battery mode Low battery Overload Fault Sounding every 4 second Sounding every second Sounding twice every second Continuously sounding Battery Battery Type Typical Recharge Time DC Voltage Charging Current Back up time(1/2 Load) 12V 9Ah 4 hours to 90% Full capacity 24VDC 1A 10~15 min depending on load Communication USB or RS-232 SNMP* Compatibility Interface with power management software Power Management from SNMP manager and web browser Supports Windows family, Linux, Unix and Mac Physical W x D x H mm Net Weight Kgs(lbs) 145x282x220mm 9.8Kg(21.6lb) Environment Operating Temperature Storage Temperature Altitude Audible noise Relative Humidity 0 – 40 °C / 32 ~ 104°F -20 ~ 50°C / -4 ~ 122°F 1,500 meters max <50dBA at 1 Meter 20 to 90% humidity (non-condensing) Standards & Certifications Performance Safety EMC (EMS / EMI) Design, production, & services Environment Marking & Certifications EN50091-3/IEC 62040-3 UL 1778, CE, EN 50091-1,EN 60950 (RD/), IEC 60950 IEC 61000-4-2/-3/-4/-5/-6/-8/-11, IEC 61000-3-2/-3,FCC Part 15, CISPR 22, EN 50091-2/IEC62040-2 Class A, EN 55022/B,FCC 47 part 15 – Subpart B – ISO 9001 ISO 14001 certified company CE, TUV/GS, UL, cUL, c-Tick
The BYL-2207 2-in-1 LAN adapter provides fast and stable wired internet through a Gigabit Ethernet port using either USB-C or USB 3.0. Perfect for laptops, MacBooks, and PCs without an Ethernet port, it ensures smooth streaming, online meetings, and reliable network performance. The BYL-2207 2-in-1 Type-C / USB 3.0 to Gigabit LAN Adapter is designed for users who need a reliable wired connection on modern laptops and devices. It supports both USB-C and USB 3.0, making it compatible with a wide range of systems including MacBooks, ultrabooks, and desktops. With Gigabit Ethernet speed, it provides faster and more stable internet compared to Wi-Fi, making it ideal for work, gaming, and streaming. 2-in-1 Connector (USB-C + USB 3.0) for wide compatibility Gigabit Ethernet Port (RJ45) for fast and stable wired internet High-Speed Performance supports up to 1000Mbps network speed Plug & Play installation on most systems Compact & Portable Design easy to carry anywhere Ideal for Work & Streaming improves stability for meetings and downloads Reliable Connection reduces lag compared to Wi-Fi Ideal for MacBooks, laptops, ultrabooks, desktops, and tablets that need a stable wired internet connection. Perfect for online meetings, remote work, gaming, IPTV, streaming, and downloading.
PROLINK 2KVA AUTO VOLTAGE REGULATOR W/LCD PVR2000D PROLiNK PVR Series is designed to automatically maintain a constant voltage level to protect sensitive electronics from brownouts, under voltages and over voltages. The PROLiNK PVR takes efficiency to a new level with its microprocessor controller tailored to allow extremely fast response for detecting and regulating voltage. Equipped with a time-delay function, the PVR is able to protect connected devices from power-back surges.
Brand Lenovo Compatible Devices Laptops Input Voltage 240 Volts Mounting Type Wall Mount Wattage 90 watts Output Voltage 20 Volts Current Rating 4.5 Amps Lenovo 90W Slim Tip Ac Adapter (Original)
The Logitech C930e 1080p Webcam is a powerful tool for clear and professional video calls. With its full HD 1080p resolution, it ensures sharp and vibrant video quality. This webcam offers a wide 90-degree field of view, making it perfect for group meetings and presentations. Its advanced lens provides consistent clarity, even in low-light conditions. Transitioning from different lighting environments is seamless, ensuring you always look your best. The Logitech C930e features high-quality autofocus, keeping you in sharp focus throughout your calls. Its built-in noise-reducing microphones capture clear audio, making your voice sound natural and professional. Connecting the Logitech C930e to your device is easy and straightforward. It uses USB connectivity, ensuring compatibility with most devices and operating systems. You don’t need additional software to get started. For added privacy, the webcam comes with a convenient privacy shutter. Simply close it when the camera is not in use, giving you peace of mind. The durable design ensures the webcam will last through frequent use. This webcam is compatible with popular platforms like Zoom, Microsoft Teams, and Google Meet. It’s an excellent choice for remote workers, educators, and professionals who want high-quality video. The compact size of the Logitech C930e 1080p Webcam makes it easy to carry and set up wherever you need it. Its adjustable clip ensures a secure fit on monitors, laptops, or tripods. Upgrade your video calls today with the Logitech C930e 1080p Webcam and experience crystal-clear communication. Specifications: Resolution : 1080p 30FPS Lens : 3mp Built-in Mic Diagonal FOV : 90 degree Digital Zoom : 4x Connectivity : USB-A
