Apple 40W Dynamic Power Adapter with 60W Max (MGTV4) The Apple 40W Dynamic Power Adapter with 60W Max delivers faster, intelligent charging for USB‑C devices. It uses Dynamic Power technology to provide a sustained 40 W output and can boost up to 60 W when needed. This charger works with USB‑C devices like iPhones, iPads, and many Apple accessories that support USB‑C charging. Its compact, pocket‑size design makes it easy to carry for travel, work, or daily use. The adapter uses a single USB‑C port, so you connect a USB‑C cable (sold separately) to start charging. With compatible devices, the dynamic boost helps reduce charging time compared with lower‑wattage chargers. Because it adjusts power based on device needs, this adapter helps maintain safe and efficient charging. Its sleek white finish and foldable plug (region dependent) also make it practical for travel packs. The Apple adapter works well with devices that negotiate higher power draws. It remains compatible with any USB‑C device that accepts power, though peak output depends on device support. Overall, this power adapter balances speed, portability, and convenience for modern mobile devices. Specifications: Delivers sustained 40 W USB‑C power with dynamic boost up to 60 W Works with iPhones, iPads, and other USB‑C devices Compact design for travel and daily use Plug‑and‑play with USB‑C cable (sold separately) Intelligent power adjustment for efficient charging
The Mercusys BE3600 Dual-Band Wi-Fi 7 Router MR25WBE delivers next-generation wireless performance for modern homes. First, the Mercusys BE3600 Dual-Band Wi-Fi 7 Router MR25WBE provides combined speeds up to 3.6 Gbps. Therefore, it supports smooth 4K and 8K streaming, online gaming, and fast downloads for multiple connected devices. In addition, Wi-Fi 7 technologies such as Multi-Link Operation, 160 MHz channels, and 4K-QAM improve throughput and reduce latency. Moreover, four high-gain omnidirectional antennas and beamforming technology expand coverage and maintain reliable connections throughout your home. Finally, the router includes Gigabit WAN and LAN ports for stable wired connections. For example, you can connect PCs, smart TVs, or gaming consoles while enjoying strong wireless coverage. Easy setup through the Mercusys app also allows quick network management and configuration. Specifications: Wi-Fi 7 router with combined speeds up to 3.6 Gbps (2880 Mbps 5 GHz, 688 Mbps 2.4 GHz) Multi-Link Operation and 160 MHz channels improve speed and reduce latency Four high-gain omnidirectional antennas with beamforming for wider coverage Gigabit WAN port and Gigabit LAN ports for fast wired connections EasyMesh compatibility and simple setup using the Mercusys mobile app
TP-Link MC220L is a Gigabit SFP media converter designed to extend network connections over fiber. It enables seamless conversion between fiber and Ethernet networks. The device supports Gigabit speeds for stable data transmission. As a result, users benefit from reliable performance across long-distance network setups. It is suitable for offices and enterprise environments. It includes one Gigabit RJ45 port and one SFP slot. Therefore, users can connect copper Ethernet to fiber using compatible SFP modules. The converter supports hot-swappable SFP modules. Consequently, users can replace modules without shutting down the system, improving flexibility and uptime. Installation is simple with plug-and-play operation. Thus, users can deploy the device quickly without complex configuration. In conclusion, TP-Link MC220L provides flexible fiber conversion, stable Gigabit performance, and easy deployment for extended network connections. Specifications: 1× Gigabit RJ45 port with Auto MDI/MDIX 1× Gigabit SFP slot for fiber modules Supports IEEE 802.3ab and 802.3z standards Hot-swappable SFP port support Plug-and-play installation with LED indicators
TP-Link TL-SG116 16-Port Gigabit Desktop Switch is an unmanaged network switch designed to expand wired connectivity with stable and fast Gigabit performance. It is ideal for homes, offices, gaming setups, and small business networks. The TL-SG116 provides 16× 10/100/1000 Mbps RJ45 Gigabit ports. Therefore, it allows multiple devices such as PCs, printers, NAS systems, IP cameras, and game consoles to connect with high-speed wired access. In addition, it supports Auto-Negotiation and Auto-MDI/MDIX for easy plug-and-play installation. Moreover, the TL-SG116 improves network efficiency with Gigabit speeds on all ports. As a result, it delivers smooth data transfer for large files, streaming, and online gaming. In addition, it includes IEEE 802.3x flow control for more stable transmission. The switch also uses Green Ethernet technology to reduce power consumption automatically based on link status and cable length. Therefore, it helps save energy without affecting performance. In addition, its fanless metal design ensures silent operation. Furthermore, it supports 802.1p/DSCP QoS and IGMP Snooping to improve traffic handling for voice, video, and multicast applications. As a result, the network stays stable under load. Finally, the TP-Link TL-SG116 delivers reliable Gigabit switching, simple plug-and-play setup, and efficient performance for everyday wired networking needs. Specifications: Ports: 16× Gigabit RJ45 (10/100/1000 Mbps) Setup: Plug-and-play with Auto-Negotiation and Auto-MDI/MDIX Performance: IEEE 802.3x flow control for stable data transfer Efficiency: Green Ethernet for reduced power consumption Features: QoS and IGMP Snooping for traffic optimization
Brand MSI Hardware Platform PC Style Clutch GM30 Item Weight 130 Grams Movement Detection Technology Optical About this item U-shaped edge RGB lighting with over 9 lighting effects Paw-3327 optical sensor up to 6200 DPI Polygonal side buttons with effortless pressing Double injection & dragon scale side grips
【2021 New 60W PD Version】This well-rececived large power bank is now back with 2 high-speed USB-C PD ports to refresh your portable charging experience. USB-C (1) port can transfer up to 60W power to your laptop while USB-C (2) port can keep your phones charged at a maximum speed of Max. 27W on the go. 【Massive Capacity】Packed with a enormous capacity of 72000mAh/266Wh as well as battery management system, this portable charger can pump out enough power to multiple devices simultaneously and securely at a high power conversion rate up to 90%. (Note: not TSA-approved, not allowed on a plane) 【Off-Grid Power for CPAP】The high-performing DC 12V/5A (150W max.) cigarette lighter port is ready to boost most CPAP machines on the market with a CPAP adapter (PURCHASED SEPARATELY), including Philips Dreamstation, Resmed Airsense/Aircurve 10, and Resmed S9. Please turn OFF the heater & the humidifier for extended runtime. 【Faster Recharging】Recharge the battery pack at full-speed via a solar panel with the two-way DC port in 3-4 hours, and the two-way USB-C (1) port in 5-6 hours. Please note that the USB-C (1) port and the DC port CANNOT be used at the same time. 【10W Wireless Charging】Align your smartphone to the charging pad to get rid of cords jumbled in your bag. The smart indicator allows you to keep taps on real-time charging status effortlessly. DOES NOT support wireless earbuds, smartwatches, and other low-power devices. https://www.renogy.com/content/files/Manuals/RC-P72000-01%202018.3.23.pdf
The Logitech Rally Plus Video Conferencing Kit (960-001242) is a modular conferencing system designed for large and extra-large meeting rooms. It combines a premium PTZ camera, two speakers, and two microphone pods to deliver clear video and audio coverage across wide spaces. Additionally, it connects via USB for simple integration with meeting room computers and conferencing platforms. This system features a 4K Ultra HD camera with 15x HD zoom, along with pan and tilt control for flexible framing. Moreover, it uses RightSight technology to automatically frame participants and adjust during meetings for a more natural experience. The Logitech Rally Plus Video Conferencing Kit includes two high-performance speakers and two mic pods with beamforming technology. In addition, RightSound technology uses AI to reduce background noise, balance voices, and improve speech clarity during calls. The system also supports expansion with additional mic pods, allowing coverage for larger groups. Therefore, it is suitable for conference rooms, boardrooms, and enterprise collaboration environments that require reliable audio and video performance. Specifications: 4K Ultra HD PTZ camera with 15x HD zoom Dual speakers with high-performance audio output Two mic pods with beamforming voice pickup RightSight and RightSound AI technologies Modular system expandable up to 7 mic pods
The FANTECH WG13S Tanto S is a high-performance gaming mouse designed for wired, Bluetooth, and 2.4GHz wireless use. It uses a premium optical sensor with up to 26,000 DPI for precise and fast tracking in gaming and productivity tasks. It supports tri-mode connectivity: USB wired, Bluetooth, and 2.4GHz wireless. As a result, users can switch between low-latency gaming mode and energy-saving Bluetooth mode depending on the device. In addition, DPI levels can be adjusted for different sensitivity needs. The mouse supports an 8K polling rate in compatible mode. Therefore, it delivers extremely fast input response for competitive gaming setups. Meanwhile, performance depends on system and receiver support for high polling rates. It features a built-in rechargeable battery. In addition, it supports extended wireless usage with fast recharging via USB. The design is lightweight and shaped for ergonomic grip comfort during long sessions. Overall, the WG13S Tanto S is a premium tri-mode gaming mouse focused on ultra-high polling rate performance, high DPI tracking, and flexible connectivity. Specifications: Tri-mode: wired USB + Bluetooth + 2.4GHz wireless Up to 26,000 DPI high-precision sensor 8K polling rate support (compatible mode) Built-in rechargeable battery Ergonomic lightweight design Adjustable DPI levels for gaming control
INVO Online INH300 Centralized server center, mainframe, network control center, computing center Full Specifications : 3KVA 2100 W Half -Load 120 -300VAC, Full -Load 165V -300VAC 45.5Hz ~ 54.5Hz 220/230/240V ± 3% Waveform True Sine wave Frequency 50/60Hz ± 0.5 Distortion <3%(linear Load); <5%(Non -linear Load) Crest Factor 3:1 Efficiency 85% Overload Capacity 110%-150%:Switch to Bypass after 1min; >150%:Shutdown afte r 200ms Short Circuit UPS output turn off and alarm RS232 ;SNMP (Optional) LCD & LED Utility, Inverter, Bypass, Battery, Load ,Battery Mode ,Frequency , UPS Fault Indicator Audible Alarm -Battery Discharge Utility Failure, Beep/4s;Battery Low, Beep/1s UPS Abnornmal Continuous Beep and Red Led On Noise <55db (1Meter) Temperature 0°C~40°C Humidity 10%~90% Optional 19 inch Rack -mount Dimension (W * D * H) mm 357 x 144 x 215 439x190x341 514X262X455 (Long Time Mode) 514x262x710 (Standard Model) Specifications: Specifications : INVO Online UPS High Frequency 3000 VA, LCD Display Inbuilt Battery 6 x 12V/7Ah AC Input 2. Bypass 3. AC Output 4. Battery 5. Fault 6. Screen 9. LCD 1. AC Input 2. Bypass 3. AC Output 4. Battery 5. Fault 6. Screen 9. LCD 1 year warranty Manufacturer Link
